[PATCH 2/3] MIPS: smp-cps: Clear Status IPL field when using EIC

[Paul Burton <paul.burton@imgtec.com>]

When using an external interrupt controller (EIC) the interrupt mask
bits in the cop0 Status register are reused for the Interrupt Priority
Level, and any interrupts with a priority lower than the field will be
ignored. Clear the field to 0 by default such that all interrupts are
serviced.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---

 arch/mips/kernel/smp-cps.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index 253e140..f19f0d3 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -307,8 +307,12 @@ static void cps_init_secondary(void)
 	if (cpu_has_mipsmt)
 		dmt();
 
-	change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
-				 STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
+	if (cpu_has_veic)
+		clear_c0_status(ST0_IM);
+	else
+		change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 |
+					 STATUSF_IP4 | STATUSF_IP5 |
+					 STATUSF_IP6 | STATUSF_IP7);
 }
 
 static void cps_smp_finish(void)
-- 
2.8.2