From: Alex Thorlton <athorlton@sgi.com>
To: linux-kernel@vger.kernel.org
Cc: Alex Thorlton <athorlton@sgi.com>,
Matt Fleming <matt@codeblueprint.co.uk>,
Borislav Petkov <bp@suse.de>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Mike Travis <travis@sgi.com>, Russ Anderson <rja@sgi.com>,
Dimitri Sivanich <sivanich@sgi.com>,
x86@kernel.org, linux-efi@vger.kernel.org
Subject: [PATCH 1/3] Convert efi_call_virt to efi_call_virt_generic
Date: Wed, 18 May 2016 14:11:39 -0500 [thread overview]
Message-ID: <1463598701-178201-2-git-send-email-athorlton@sgi.com> (raw)
In-Reply-To: <1463598701-178201-1-git-send-email-athorlton@sgi.com>
This commit makes a few slight modifications to the efi_call_virt macro
to get it to work with function pointers that are stored in locations
other than efi.systab->runtime, and renames the macro to
efi_call_virt_generic. The majority of the changes here are to pull
these macros up into header files so that they can be accessed from
outside of drivers/firmware/efi/runtime-wrappers.c.
The most significant change not directly related to the code move is to
add an extra "p" argument into the appropriate efi_call macros, and use
that new argument in place of the, formerly hard-coded,
efi.systab->runtime pointer.
The last piece of the puzzle was to add an efi_call_virt macro back into
drivers/firmware/efi/runtime-wrappers.c to wrap around the new
efi_call_virt_generic macro - this was mainly to keep the code from
looking too cluttered by adding a bunch of extra references to
efi.systab->runtime everywhere.
Note that I also broke up the code in the efi_call_virt_generic macro a
bit in the process of moving it.
Signed-off-by: Alex Thorlton <athorlton@sgi.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: x86@kernel.org
Cc: linux-efi@vger.kernel.org
---
arch/x86/include/asm/efi.h | 4 +--
drivers/firmware/efi/runtime-wrappers.c | 53 +++++++--------------------------
include/linux/efi.h | 51 +++++++++++++++++++++++++++++++
3 files changed, 63 insertions(+), 45 deletions(-)
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 78d1e74..f310f0b 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -81,8 +81,8 @@ struct efi_scratch {
} \
})
-#define arch_efi_call_virt(f, args...) \
- efi_call((void *)efi.systab->runtime->f, args) \
+#define arch_efi_call_virt(p, f, args...) \
+ efi_call((void *)p->f, args) \
#define arch_efi_call_virt_teardown() \
({ \
diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
index 23bef6b..e8bc493 100644
--- a/drivers/firmware/efi/runtime-wrappers.c
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -22,7 +22,16 @@
#include <linux/stringify.h>
#include <asm/efi.h>
-static void efi_call_virt_check_flags(unsigned long flags, const char *call)
+/*
+ * Wrap around the new efi_call_virt_generic macros so that the
+ * code doesn't get too cluttered
+ */
+#define efi_call_virt(f, args...) \
+ efi_call_virt_generic(efi.systab->runtime, f, args)
+#define __efi_call_virt(f, args...) \
+ __efi_call_virt_generic(efi.systab->runtime, f, args)
+
+void efi_call_virt_check_flags(unsigned long flags, const char *call)
{
unsigned long cur_flags, mismatch;
@@ -39,48 +48,6 @@ static void efi_call_virt_check_flags(unsigned long flags, const char *call)
}
/*
- * Arch code can implement the following three template macros, avoiding
- * reptition for the void/non-void return cases of {__,}efi_call_virt:
- *
- * * arch_efi_call_virt_setup
- *
- * Sets up the environment for the call (e.g. switching page tables,
- * allowing kernel-mode use of floating point, if required).
- *
- * * arch_efi_call_virt
- *
- * Performs the call. The last expression in the macro must be the call
- * itself, allowing the logic to be shared by the void and non-void
- * cases.
- *
- * * arch_efi_call_virt_teardown
- *
- * Restores the usual kernel environment once the call has returned.
- */
-
-#define efi_call_virt(f, args...) \
-({ \
- efi_status_t __s; \
- unsigned long flags; \
- arch_efi_call_virt_setup(); \
- local_save_flags(flags); \
- __s = arch_efi_call_virt(f, args); \
- efi_call_virt_check_flags(flags, __stringify(f)); \
- arch_efi_call_virt_teardown(); \
- __s; \
-})
-
-#define __efi_call_virt(f, args...) \
-({ \
- unsigned long flags; \
- arch_efi_call_virt_setup(); \
- local_save_flags(flags); \
- arch_efi_call_virt(f, args); \
- efi_call_virt_check_flags(flags, __stringify(f)); \
- arch_efi_call_virt_teardown(); \
-})
-
-/*
* According to section 7.1 of the UEFI spec, Runtime Services are not fully
* reentrant, and there are particular combinations of calls that need to be
* serialized. (source: UEFI Specification v2.4A)
diff --git a/include/linux/efi.h b/include/linux/efi.h
index df7acb5..8d1117ae 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -1471,4 +1471,55 @@ efi_status_t efi_setup_gop(efi_system_table_t *sys_table_arg,
unsigned long size);
bool efi_runtime_disabled(void);
+extern void efi_call_virt_check_flags(unsigned long flags, const char *call);
+
+/*
+ * Arch code can implement the following three template macros, avoiding
+ * reptition for the void/non-void return cases of {__,}efi_call_virt:
+ *
+ * * arch_efi_call_virt_setup
+ *
+ * Sets up the environment for the call (e.g. switching page tables,
+ * allowing kernel-mode use of floating point, if required).
+ *
+ * * arch_efi_call_virt
+ *
+ * Performs the call. The last expression in the macro must be the call
+ * itself, allowing the logic to be shared by the void and non-void
+ * cases.
+ *
+ * * arch_efi_call_virt_teardown
+ *
+ * Restores the usual kernel environment once the call has returned.
+ */
+
+#define efi_call_virt_generic(p, f, args...) \
+({ \
+ efi_status_t __s; \
+ unsigned long flags; \
+ \
+ arch_efi_call_virt_setup(); \
+ \
+ local_save_flags(flags); \
+ __s = arch_efi_call_virt(p, f, args); \
+ efi_call_virt_check_flags(flags, __stringify(f)); \
+ \
+ arch_efi_call_virt_teardown(); \
+ \
+ __s; \
+})
+
+#define __efi_call_virt_generic(p, f, args...) \
+({ \
+ unsigned long flags; \
+ \
+ arch_efi_call_virt_setup(); \
+ \
+ local_save_flags(flags); \
+ arch_efi_call_virt(p, f, args); \
+ efi_call_virt_check_flags(flags, __stringify(f)); \
+ \
+ arch_efi_call_virt_teardown(); \
+})
+
#endif /* _LINUX_EFI_H */
--
1.8.5.6
next prev parent reply other threads:[~2016-05-18 19:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-18 19:11 [RFC PATCH 0/3] x86/UV, x86/efi: Re-factor efi_call_virt for general use Alex Thorlton
2016-05-18 19:11 ` Alex Thorlton [this message]
2016-06-02 15:41 ` [PATCH 1/3] Convert efi_call_virt to efi_call_virt_generic Matt Fleming
2016-06-02 16:23 ` Alex Thorlton
2016-05-18 19:11 ` [PATCH 2/3] Update uv_bios_call to use efi_call_virt_generic Alex Thorlton
2016-06-02 19:45 ` Matt Fleming
2016-06-02 21:14 ` Alex Thorlton
2016-06-02 21:56 ` Alex Thorlton
2016-05-18 19:11 ` [PATCH 3/3] Update efi_thunk " Alex Thorlton
2016-06-02 20:19 ` Matt Fleming
2016-06-02 21:25 ` Alex Thorlton
2016-05-18 19:13 ` [RFC PATCH 0/3] x86/UV, x86/efi: Re-factor efi_call_virt for general use Alex Thorlton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463598701-178201-2-git-send-email-athorlton@sgi.com \
--to=athorlton@sgi.com \
--cc=bp@suse.de \
--cc=hpa@zytor.com \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt@codeblueprint.co.uk \
--cc=mingo@redhat.com \
--cc=rja@sgi.com \
--cc=sivanich@sgi.com \
--cc=tglx@linutronix.de \
--cc=travis@sgi.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®