From: Kamal Mostafa <kamal@canonical.com>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org,
kernel-team@lists.ubuntu.com
Cc: Craig Gallek <kraig@google.com>,
Eric Dumazet <edumazet@google.com>,
"David S . Miller" <davem@davemloft.net>,
Kamal Mostafa <kamal@canonical.com>
Subject: [PATCH 4.2.y-ckt 52/53] soreuseport: fix ordering for mixed v4/v6 sockets
Date: Tue, 24 May 2016 10:55:22 -0700 [thread overview]
Message-ID: <1464112523-3701-53-git-send-email-kamal@canonical.com> (raw)
In-Reply-To: <1464112523-3701-1-git-send-email-kamal@canonical.com>
4.2.8-ckt11 -stable review patch. If anyone has any objections, please let me know.
---8<------------------------------------------------------------
From: Craig Gallek <kraig@google.com>
[ Upstream commit d894ba18d4e449b3a7f6eb491f16c9e02933736e ]
With the SO_REUSEPORT socket option, it is possible to create sockets
in the AF_INET and AF_INET6 domains which are bound to the same IPv4 address.
This is only possible with SO_REUSEPORT and when not using IPV6_V6ONLY on
the AF_INET6 sockets.
Prior to the commits referenced below, an incoming IPv4 packet would
always be routed to a socket of type AF_INET when this mixed-mode was used.
After those changes, the same packet would be routed to the most recently
bound socket (if this happened to be an AF_INET6 socket, it would
have an IPv4 mapped IPv6 address).
The change in behavior occurred because the recent SO_REUSEPORT optimizations
short-circuit the socket scoring logic as soon as they find a match. They
did not take into account the scoring logic that favors AF_INET sockets
over AF_INET6 sockets in the event of a tie.
To fix this problem, this patch changes the insertion order of AF_INET
and AF_INET6 addresses in the TCP and UDP socket lists when the sockets
have SO_REUSEPORT set. AF_INET sockets will be inserted at the head of the
list and AF_INET6 sockets with SO_REUSEPORT set will always be inserted at
the tail of the list. This will force AF_INET sockets to always be
considered first.
Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Fixes: 125e80b88687 ("soreuseport: fast reuseport TCP socket selection")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
include/linux/rculist_nulls.h | 39 +++++++++++++++++++++++++++++++++++++++
include/net/sock.h | 6 +++++-
net/ipv4/udp.c | 9 +++++++--
3 files changed, 51 insertions(+), 3 deletions(-)
diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h
index 1c33dd7..4ae95f7 100644
--- a/include/linux/rculist_nulls.h
+++ b/include/linux/rculist_nulls.h
@@ -98,6 +98,45 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n,
if (!is_a_nulls(first))
first->pprev = &n->next;
}
+
+/**
+ * hlist_nulls_add_tail_rcu
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * Description:
+ * Adds the specified element to the end of the specified hlist_nulls,
+ * while permitting racing traversals. NOTE: tail insertion requires
+ * list traversal.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_nulls_add_head_rcu()
+ * or hlist_nulls_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_nulls_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs. Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_nulls_add_tail_rcu(struct hlist_nulls_node *n,
+ struct hlist_nulls_head *h)
+{
+ struct hlist_nulls_node *i, *last = NULL;
+
+ for (i = hlist_nulls_first_rcu(h); !is_a_nulls(i);
+ i = hlist_nulls_next_rcu(i))
+ last = i;
+
+ if (last) {
+ n->next = last->next;
+ n->pprev = &last->next;
+ rcu_assign_pointer(hlist_nulls_next_rcu(last), n);
+ } else {
+ hlist_nulls_add_head_rcu(n, h);
+ }
+}
+
/**
* hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type
* @tpos: the type * to use as a loop cursor.
diff --git a/include/net/sock.h b/include/net/sock.h
index 591d303..636476d 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -631,7 +631,11 @@ static inline void sk_add_node_rcu(struct sock *sk, struct hlist_head *list)
static inline void __sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_head *list)
{
- hlist_nulls_add_head_rcu(&sk->sk_nulls_node, list);
+ if (IS_ENABLED(CONFIG_IPV6) && sk->sk_reuseport &&
+ sk->sk_family == AF_INET6)
+ hlist_nulls_add_tail_rcu(&sk->sk_nulls_node, list);
+ else
+ hlist_nulls_add_head_rcu(&sk->sk_nulls_node, list);
}
static inline void sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_head *list)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 031752e..49afbe1 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -297,8 +297,13 @@ found:
hslot2 = udp_hashslot2(udptable, udp_sk(sk)->udp_portaddr_hash);
spin_lock(&hslot2->lock);
- hlist_nulls_add_head_rcu(&udp_sk(sk)->udp_portaddr_node,
- &hslot2->head);
+ if (IS_ENABLED(CONFIG_IPV6) && sk->sk_reuseport &&
+ sk->sk_family == AF_INET6)
+ hlist_nulls_add_tail_rcu(&udp_sk(sk)->udp_portaddr_node,
+ &hslot2->head);
+ else
+ hlist_nulls_add_head_rcu(&udp_sk(sk)->udp_portaddr_node,
+ &hslot2->head);
hslot2->count++;
spin_unlock(&hslot2->lock);
}
--
2.7.4
next prev parent reply other threads:[~2016-05-24 17:58 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 17:54 [4.2.y-ckt stable] Linux 4.2.8-ckt11 stable review Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 01/53] [4.2-stable only] fix backport "IB/security: restrict use of the write() interface" Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 02/53] Revert "usb: hub: do not clear BOS field during reset device" Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 03/53] regulator: s2mps11: Fix invalid selector mask and voltages for buck9 Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 04/53] regmap: spmi: Fix regmap_spmi_ext_read in multi-byte case Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 05/53] ALSA: usb-audio: Quirk for yet another Phoenix Audio devices (v2) Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 06/53] atomic_open(): fix the handling of create_error Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 07/53] drm/i915/bdw: Add missing delay during L3 SQC credit programming Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 08/53] crypto: hash - Fix page length clamping in hash walk Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 09/53] drm/radeon: fix DP link training issue with second 4K monitor Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 10/53] drm/radeon: fix PLL sharing on DCE6.1 (v2) Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 11/53] get_rock_ridge_filename(): handle malformed NM entries Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 12/53] ALSA: hda - Fix white noise on Asus UX501VW headset Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 13/53] Input: max8997-haptic - fix NULL pointer dereference Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 14/53] drm/i915: Bail out of pipe config compute loop on LPT Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 15/53] ALSA: hda - Fix broken reconfig Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 16/53] ALSA: hda - Fix subwoofer pin on ASUS N751 and N551 Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 17/53] vfs: add vfs_select_inode() helper Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 18/53] vfs: rename: check backing inode being equal Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 19/53] ALSA: usb-audio: Yet another Phoneix Audio device quirk Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 20/53] perf/x86: Fix undefined shift on 32-bit kernels Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 21/53] perf/x86/intel/pt: Generate PMI in the STOP region as well Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 22/53] perf/core: Disable the event on a truncated AUX record Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 23/53] tools lib traceevent: Do not reassign parg after collapse_tree() Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 24/53] workqueue: fix rebind bound workers warning Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 25/53] ocfs2: fix posix_acl_create deadlock Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 26/53] nf_conntrack: avoid kernel pointer value leak in slab name Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 27/53] macvtap: segmented packet is consumed Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 28/53] regulator: axp20x: Fix axp22x ldo_io voltage ranges Kamal Mostafa
2016-05-24 17:54 ` [PATCH 4.2.y-ckt 29/53] arm64: bpf: jit JMP_JSET_{X,K} Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 30/53] bridge: fix igmp / mld query parsing Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 31/53] net/mlx4_en: Fix endianness bug in IPV6 csum calculation Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 32/53] net: fec: only clear a queue's work bit if the queue was emptied Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 33/53] tcp: refresh skb timestamp at retransmit time Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 34/53] net/route: enforce hoplimit max value Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 35/53] decnet: Do not build routes to devices without decnet private data Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 36/53] route: do not cache fib route info on local routes with oif Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 37/53] net: use skb_postpush_rcsum instead of own implementations Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 38/53] vlan: pull on __vlan_insert_tag error path and fix csum correction Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 39/53] ipv4/fib: don't warn when primary address is missing if in_dev is dead Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 40/53] bpf: fix double-fdput in replace_map_fd_with_map_ptr() Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 41/53] net_sched: introduce qdisc_replace() helper Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 42/53] net_sched: update hierarchical backlog too Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 43/53] sch_htb: update backlog as well Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 44/53] sch_dsmark: " Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 45/53] netem: Segment GSO packets on enqueue Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 46/53] net: fix infoleak in llc Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 47/53] net: fix infoleak in rtnetlink Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 48/53] VSOCK: do not disconnect socket when peer has shutdown SEND only Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 49/53] net: bridge: fix old ioctl unlocked net device walk Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 50/53] net: fix a kernel infoleak in x25 module Kamal Mostafa
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 51/53] cdc_mbim: apply "NDP to end" quirk to all Huawei devices Kamal Mostafa
2016-05-24 17:55 ` Kamal Mostafa [this message]
2016-05-24 17:55 ` [PATCH 4.2.y-ckt 53/53] uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h Kamal Mostafa
2016-05-25 7:22 ` Mikko Rapeli
2016-05-24 18:30 [PATCH 4.2.y-ckt 52/53] soreuseport: fix ordering for mixed v4/v6 sockets Craig Gallek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464112523-3701-53-git-send-email-kamal@canonical.com \
--to=kamal@canonical.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kernel-team@lists.ubuntu.com \
--cc=kraig@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®