From: Ming Lei <ming.lei@canonical.com>
To: Jens Axboe <axboe@fb.com>, linux-kernel@vger.kernel.org
Cc: linux-block@vger.kernel.org,
Christoph Hellwig <hch@infradead.org>,
Ming Lei <ming.lei@canonical.com>,
Keith Busch <keith.busch@intel.com>,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Ming Lin <ming.l@ssi.samsung.com>,
Mike Snitzer <snitzer@redhat.com>, Tejun Heo <tj@kernel.org>
Subject: [PATCH v6 1/8] block: move bvec iterator into include/linux/bvec.h
Date: Mon, 30 May 2016 21:34:29 +0800 [thread overview]
Message-ID: <1464615294-9946-2-git-send-email-ming.lei@canonical.com> (raw)
In-Reply-To: <1464615294-9946-1-git-send-email-ming.lei@canonical.com>
bvec iterator helpers should be used to implement by
iterate_bvec():lib/iov_iter.c too, and move them into
one header, so that we can keep bvec iterator header
out of CONFIG_BLOCK. Then we can remove the reinventing
of wheel in iterate_bvec().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
---
include/linux/bio.h | 51 +-----------------------------------
include/linux/bvec.h | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 75 insertions(+), 50 deletions(-)
create mode 100644 include/linux/bvec.h
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 9faebf7..ed4bfb9 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -31,6 +31,7 @@
/* struct bio, bio_vec and BIO_* flags are defined in blk_types.h */
#include <linux/blk_types.h>
+#include <linux/bvec.h>
#define BIO_DEBUG
@@ -57,29 +58,6 @@
(bio)->bi_rw |= ((unsigned long) (prio) << BIO_PRIO_SHIFT); \
} while (0)
-/*
- * various member access, note that bio_data should of course not be used
- * on highmem page vectors
- */
-#define __bvec_iter_bvec(bvec, iter) (&(bvec)[(iter).bi_idx])
-
-#define bvec_iter_page(bvec, iter) \
- (__bvec_iter_bvec((bvec), (iter))->bv_page)
-
-#define bvec_iter_len(bvec, iter) \
- min((iter).bi_size, \
- __bvec_iter_bvec((bvec), (iter))->bv_len - (iter).bi_bvec_done)
-
-#define bvec_iter_offset(bvec, iter) \
- (__bvec_iter_bvec((bvec), (iter))->bv_offset + (iter).bi_bvec_done)
-
-#define bvec_iter_bvec(bvec, iter) \
-((struct bio_vec) { \
- .bv_page = bvec_iter_page((bvec), (iter)), \
- .bv_len = bvec_iter_len((bvec), (iter)), \
- .bv_offset = bvec_iter_offset((bvec), (iter)), \
-})
-
#define bio_iter_iovec(bio, iter) \
bvec_iter_bvec((bio)->bi_io_vec, (iter))
@@ -193,33 +171,6 @@ static inline void *bio_data(struct bio *bio)
#define bio_for_each_segment_all(bvl, bio, i) \
for (i = 0, bvl = (bio)->bi_io_vec; i < (bio)->bi_vcnt; i++, bvl++)
-static inline void bvec_iter_advance(struct bio_vec *bv, struct bvec_iter *iter,
- unsigned bytes)
-{
- WARN_ONCE(bytes > iter->bi_size,
- "Attempted to advance past end of bvec iter\n");
-
- while (bytes) {
- unsigned len = min(bytes, bvec_iter_len(bv, *iter));
-
- bytes -= len;
- iter->bi_size -= len;
- iter->bi_bvec_done += len;
-
- if (iter->bi_bvec_done == __bvec_iter_bvec(bv, *iter)->bv_len) {
- iter->bi_bvec_done = 0;
- iter->bi_idx++;
- }
- }
-}
-
-#define for_each_bvec(bvl, bio_vec, iter, start) \
- for (iter = (start); \
- (iter).bi_size && \
- ((bvl = bvec_iter_bvec((bio_vec), (iter))), 1); \
- bvec_iter_advance((bio_vec), &(iter), (bvl).bv_len))
-
-
static inline void bio_advance_iter(struct bio *bio, struct bvec_iter *iter,
unsigned bytes)
{
diff --git a/include/linux/bvec.h b/include/linux/bvec.h
new file mode 100644
index 0000000..29c459d
--- /dev/null
+++ b/include/linux/bvec.h
@@ -0,0 +1,74 @@
+/*
+ * bvec iterator
+ *
+ * Copyright (C) 2001 Ming Lei <ming.lei@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public Licens
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-
+ */
+#ifndef __LINUX_BVEC_ITER_H
+#define __LINUX_BVEC_ITER_H
+
+#include <linux/blk_types.h>
+
+/*
+ * various member access, note that bio_data should of course not be used
+ * on highmem page vectors
+ */
+#define __bvec_iter_bvec(bvec, iter) (&(bvec)[(iter).bi_idx])
+
+#define bvec_iter_page(bvec, iter) \
+ (__bvec_iter_bvec((bvec), (iter))->bv_page)
+
+#define bvec_iter_len(bvec, iter) \
+ min((iter).bi_size, \
+ __bvec_iter_bvec((bvec), (iter))->bv_len - (iter).bi_bvec_done)
+
+#define bvec_iter_offset(bvec, iter) \
+ (__bvec_iter_bvec((bvec), (iter))->bv_offset + (iter).bi_bvec_done)
+
+#define bvec_iter_bvec(bvec, iter) \
+((struct bio_vec) { \
+ .bv_page = bvec_iter_page((bvec), (iter)), \
+ .bv_len = bvec_iter_len((bvec), (iter)), \
+ .bv_offset = bvec_iter_offset((bvec), (iter)), \
+})
+
+static inline void bvec_iter_advance(struct bio_vec *bv, struct bvec_iter *iter,
+ unsigned bytes)
+{
+ WARN_ONCE(bytes > iter->bi_size,
+ "Attempted to advance past end of bvec iter\n");
+
+ while (bytes) {
+ unsigned len = min(bytes, bvec_iter_len(bv, *iter));
+
+ bytes -= len;
+ iter->bi_size -= len;
+ iter->bi_bvec_done += len;
+
+ if (iter->bi_bvec_done == __bvec_iter_bvec(bv, *iter)->bv_len) {
+ iter->bi_bvec_done = 0;
+ iter->bi_idx++;
+ }
+ }
+}
+
+#define for_each_bvec(bvl, bio_vec, iter, start) \
+ for (iter = (start); \
+ (iter).bi_size && \
+ ((bvl = bvec_iter_bvec((bio_vec), (iter))), 1); \
+ bvec_iter_advance((bio_vec), &(iter), (bvl).bv_len))
+
+#endif /* __LINUX_BVEC_ITER_H */
--
1.9.1
next prev parent reply other threads:[~2016-05-30 13:36 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-30 13:34 [PATCH v6 0/8] block: prepare for multipage bvecs Ming Lei
2016-05-30 13:34 ` Ming Lei [this message]
2016-05-30 13:34 ` [PATCH v6 2/8] block: move two bvec structure into bvec.h Ming Lei
2016-05-30 13:34 ` [PATCH v6 3/8] block: mark 1st parameter of bvec_iter_advance as const Ming Lei
2016-05-30 13:34 ` [PATCH v6 4/8] iov_iter: use bvec iterator to implement iterate_bvec() Ming Lei
2016-05-30 13:34 ` [PATCH v6 5/8] fs: xfs: replace BIO_MAX_SECTORS with BIO_MAX_PAGES Ming Lei
2016-06-01 13:48 ` Christoph Hellwig
2016-06-02 3:32 ` Ming Lei
2016-05-30 13:34 ` [PATCH v6 6/8] block: bio: remove BIO_MAX_SECTORS Ming Lei
2016-05-30 13:34 ` [PATCH v6 7/8] block: drbd: avoid to use BIO_MAX_SIZE Ming Lei
2016-05-30 13:34 ` [PATCH v6 8/8] block: mark BIO_MAX_SIZE as obsolete Ming Lei
2016-05-31 16:07 ` Jens Axboe
2016-05-31 15:53 ` [PATCH v6 0/8] block: prepare for multipage bvecs Mike Snitzer
2016-06-01 12:38 ` Ming Lei
2016-06-01 13:44 ` Christoph Hellwig
2016-06-01 13:51 ` Mike Snitzer
2016-06-01 14:05 ` Christoph Hellwig
2016-06-02 2:13 ` Ming Lei
2016-06-01 13:43 ` Christoph Hellwig
2016-06-01 13:53 ` Hannes Reinecke
2016-06-01 13:57 ` Mike Snitzer
2016-06-09 16:06 ` Jens Axboe
2016-06-10 2:44 ` Ming Lei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464615294-9946-2-git-send-email-ming.lei@canonical.com \
--to=ming.lei@canonical.com \
--cc=axboe@fb.com \
--cc=hch@infradead.org \
--cc=keith.busch@intel.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.l@ssi.samsung.com \
--cc=snitzer@redhat.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®