From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753087AbcFBKXs (ORCPT ); Thu, 2 Jun 2016 06:23:48 -0400 Received: from mail-wm0-f44.google.com ([74.125.82.44]:38128 "EHLO mail-wm0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752801AbcFBKXq (ORCPT ); Thu, 2 Jun 2016 06:23:46 -0400 From: Srinivas Kandagatla To: bjorn.andersson@linaro.org, Mark Brown Cc: linux-kernel@vger.kernel.org, Liam Girdwood , linux-arm-msm@vger.kernel.org, Srinivas Kandagatla Subject: [RFC PATCH v1 2/3] regulator: qcom_smd: add list_voltage callback Date: Thu, 2 Jun 2016 11:23:15 +0100 Message-Id: <1464862996-3147-3-git-send-email-srinivas.kandagatla@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1464862996-3147-1-git-send-email-srinivas.kandagatla@linaro.org> References: <1464862996-3147-1-git-send-email-srinivas.kandagatla@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds support to list_voltage callback, so that consumers like mmc core, can get information of supported voltage range. Without this patch there is no way for mmc core to know this voltage range. Signed-off-by: Srinivas Kandagatla --- drivers/regulator/qcom_smd-regulator.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 56a17ec..b11b627 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -140,6 +140,7 @@ static const struct regulator_ops rpm_smps_ldo_ops = { .enable = rpm_reg_enable, .disable = rpm_reg_disable, .is_enabled = rpm_reg_is_enabled, + .list_voltage = regulator_list_voltage_linear_range, .get_voltage = rpm_reg_get_voltage, .set_voltage = rpm_reg_set_voltage, -- 2.8.2