From: "Hugh Sipière" <hgsipiere@gmail.com>
To: m@bues.ch
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
"Hugh Sipière" <hgsipiere@gmail.com>
Subject: [PATCH] drivers: ssb: Change bare unsigned to unsigned int to suit coding style
Date: Sat, 4 Jun 2016 12:50:05 +0100 [thread overview]
Message-ID: <1465041005-5511-1-git-send-email-hgsipiere@gmail.com> (raw)
These lines just have unsigned gpio rather than unsigned int gpio.
I changed it to suit the coding style.
Signed-off-by: Hugh Sipière <hgsipiere@gmail.com>
---
drivers/ssb/driver_gpio.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/ssb/driver_gpio.c b/drivers/ssb/driver_gpio.c
index 180e027..796e220 100644
--- a/drivers/ssb/driver_gpio.c
+++ b/drivers/ssb/driver_gpio.c
@@ -23,7 +23,7 @@
**************************************************/
#if IS_ENABLED(CONFIG_SSB_EMBEDDED)
-static int ssb_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+static int ssb_gpio_to_irq(struct gpio_chip *chip, unsigned int gpio)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
@@ -38,14 +38,14 @@ static int ssb_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
* ChipCommon
**************************************************/
-static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned gpio)
+static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned int gpio)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
return !!ssb_chipco_gpio_in(&bus->chipco, 1 << gpio);
}
-static void ssb_gpio_chipco_set_value(struct gpio_chip *chip, unsigned gpio,
+static void ssb_gpio_chipco_set_value(struct gpio_chip *chip, unsigned int gpio,
int value)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
@@ -54,7 +54,7 @@ static void ssb_gpio_chipco_set_value(struct gpio_chip *chip, unsigned gpio,
}
static int ssb_gpio_chipco_direction_input(struct gpio_chip *chip,
- unsigned gpio)
+ unsigned int gpio)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
@@ -63,7 +63,7 @@ static int ssb_gpio_chipco_direction_input(struct gpio_chip *chip,
}
static int ssb_gpio_chipco_direction_output(struct gpio_chip *chip,
- unsigned gpio, int value)
+ unsigned int gpio, int value)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
@@ -72,7 +72,7 @@ static int ssb_gpio_chipco_direction_output(struct gpio_chip *chip,
return 0;
}
-static int ssb_gpio_chipco_request(struct gpio_chip *chip, unsigned gpio)
+static int ssb_gpio_chipco_request(struct gpio_chip *chip, unsigned int gpio)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
@@ -85,7 +85,7 @@ static int ssb_gpio_chipco_request(struct gpio_chip *chip, unsigned gpio)
return 0;
}
-static void ssb_gpio_chipco_free(struct gpio_chip *chip, unsigned gpio)
+static void ssb_gpio_chipco_free(struct gpio_chip *chip, unsigned int gpio)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
@@ -256,14 +256,14 @@ static int ssb_gpio_chipco_init(struct ssb_bus *bus)
#ifdef CONFIG_SSB_DRIVER_EXTIF
-static int ssb_gpio_extif_get_value(struct gpio_chip *chip, unsigned gpio)
+static int ssb_gpio_extif_get_value(struct gpio_chip *chip, unsigned int gpio)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
return !!ssb_extif_gpio_in(&bus->extif, 1 << gpio);
}
-static void ssb_gpio_extif_set_value(struct gpio_chip *chip, unsigned gpio,
+static void ssb_gpio_extif_set_value(struct gpio_chip *chip, unsigned int gpio,
int value)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
@@ -272,7 +272,7 @@ static void ssb_gpio_extif_set_value(struct gpio_chip *chip, unsigned gpio,
}
static int ssb_gpio_extif_direction_input(struct gpio_chip *chip,
- unsigned gpio)
+ unsigned int gpio)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
@@ -281,7 +281,7 @@ static int ssb_gpio_extif_direction_input(struct gpio_chip *chip,
}
static int ssb_gpio_extif_direction_output(struct gpio_chip *chip,
- unsigned gpio, int value)
+ unsigned int gpio, int value)
{
struct ssb_bus *bus = gpiochip_get_data(chip);
--
2.5.5
next reply other threads:[~2016-06-04 11:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-04 11:50 Hugh Sipière [this message]
2016-06-04 11:55 ` Michael Büsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465041005-5511-1-git-send-email-hgsipiere@gmail.com \
--to=hgsipiere@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=m@bues.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®