[PATCH v4 0/2] Add a new Rockchip usb2 phy driver

[Frank Wang <frank.wang@rock-chips.com>]

The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
IP block than rk3288 and before, and most of phy-related registers are
also different from the past, so a new phy driver is required necessarily.

These series patches add phy-rockchip-inno-usb2.c and the corresponding
documentation.

Changes in v4:
 - Used 'phy-supply' instead of 'vbus_*-supply'.

Changes in v3:
 - Supplemented some hardware-description into the devicetree bindings.
 - Resolved the mapping defect between fixed value in driver and the property
   in devicetree.
 - Code cleanup.

Changes in v2:
 - Specified more hardware-description into the devicetree bindings.
 - Optimized some process of driver.

Frank Wang (2):
  Documentation: bindings: add DT documentation for Rockchip USB2PHY
  phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy

 .../bindings/phy/phy-rockchip-inno-usb2.txt        |   62 ++
 drivers/phy/Kconfig                                |    7 +
 drivers/phy/Makefile                               |    1 +
 drivers/phy/phy-rockchip-inno-usb2.c               |  614 ++++++++++++++++++++
 4 files changed, 684 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
 create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c

-- 
1.7.9.5