[PATCH] phy: phy-sun4i-usb: Add log when probing

[Quentin Schulz <quentin.schulz@free-electrons.com>]

When phy-sun4i-usb's probing fails, it does not print the reason in
kernel log, forcing the developer to edit this driver to add info logs.
This commit makes the kernel print the reason of phy-sun4i-usb's probing
failure or a success message.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
---
 drivers/phy/phy-sun4i-usb.c | 28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 45f01d6..117afa0 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -552,24 +552,32 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
 	data->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(data->base))
+	if (IS_ERR(data->base)) {
+		dev_err(dev, "Couldn't map our registers\n");
 		return PTR_ERR(data->base);
+	}
 
 	data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det",
 						    GPIOD_IN);
-	if (IS_ERR(data->id_det_gpio))
+	if (IS_ERR(data->id_det_gpio)) {
+		dev_err(dev, "Couldn't request ID GPIO\n");
 		return PTR_ERR(data->id_det_gpio);
+	}
 
 	data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det",
 						      GPIOD_IN);
-	if (IS_ERR(data->vbus_det_gpio))
+	if (IS_ERR(data->vbus_det_gpio)) {
+		dev_err(dev, "Couldn't request VBUS detect GPIO\n");
 		return PTR_ERR(data->vbus_det_gpio);
+	}
 
 	if (of_find_property(np, "usb0_vbus_power-supply", NULL)) {
 		data->vbus_power_supply = devm_power_supply_get_by_phandle(dev,
 						     "usb0_vbus_power-supply");
-		if (IS_ERR(data->vbus_power_supply))
+		if (IS_ERR(data->vbus_power_supply)) {
+			dev_err(dev, "Couldn't get the VBUS power supply\n");
 			return PTR_ERR(data->vbus_power_supply);
+		}
 
 		if (!data->vbus_power_supply)
 			return -EPROBE_DEFER;
@@ -584,8 +592,10 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	if (data->id_det_gpio) {
 		data->extcon = devm_extcon_dev_allocate(dev,
 							sun4i_usb_phy0_cable);
-		if (IS_ERR(data->extcon))
+		if (IS_ERR(data->extcon)) {
+			dev_err(dev, "Couldn't allocate our extcon device\n");
 			return PTR_ERR(data->extcon);
+		}
 
 		ret = devm_extcon_dev_register(dev, data->extcon);
 		if (ret) {
@@ -601,8 +611,12 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 		snprintf(name, sizeof(name), "usb%d_vbus", i);
 		phy->vbus = devm_regulator_get_optional(dev, name);
 		if (IS_ERR(phy->vbus)) {
-			if (PTR_ERR(phy->vbus) == -EPROBE_DEFER)
+			if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) {
+				dev_err(dev, "Couldn't get regulator %s... Deferring probe\n",
+					name);
 				return -EPROBE_DEFER;
+			}
+
 			phy->vbus = NULL;
 		}
 
@@ -690,6 +704,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(phy_provider);
 	}
 
+	dev_info(dev, "successfully loaded\n");
+
 	return 0;
 }
 
-- 
2.5.0