[PATCH v3 03/10] drm/bridge: analogix_dp: correct the register bit define error in ANALOGIX_DP_PLL_REG_1

[Yakir Yang <ykk@rock-chips.com>]

There're an register define error in ANALOGIX_DP_PLL_REG_1 which introduced
by commit bcec20fd5ad6 ("drm: bridge: analogix/dp: add some rk3288 special
registers setting").

The PHY PLL input clock source is selected by ANALOGIX_DP_PLL_REG_1
BIT 0, not BIT 1.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Changes in v3:
- Add reviewed flag from Tomasz.
    [https://chromium-review.googlesource.com/#/c/346315/15]
- Add tested flag from Javier

Changes in v2: None

 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 337912b..88d56ad 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -163,8 +163,8 @@
 #define HSYNC_POLARITY_CFG			(0x1 << 0)
 
 /* ANALOGIX_DP_PLL_REG_1 */
-#define REF_CLK_24M				(0x1 << 1)
-#define REF_CLK_27M				(0x0 << 1)
+#define REF_CLK_24M				(0x1 << 0)
+#define REF_CLK_27M				(0x0 << 0)
 
 /* ANALOGIX_DP_LANE_MAP */
 #define LANE3_MAP_LOGIC_LANE_0			(0x0 << 6)
-- 
1.9.1