From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: daniel.lezcano@linaro.org, tglx@linutronix.de
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH V2 46/63] clocksource/drivers/timer-sp804: Convert init function to return error
Date: Thu, 16 Jun 2016 23:27:05 +0200 [thread overview]
Message-ID: <1466112442-31105-47-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org>
The init functions do not return any error. They behave as the following:
- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly
or
- print an error and let the caller unaware if the state of the system
Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.
Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/timer-sp804.c | 91 ++++++++++++++++++++++++++-------------
1 file changed, 60 insertions(+), 31 deletions(-)
diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index 5f45b9a..7c2944ad 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -77,7 +77,7 @@ void __init sp804_timer_disable(void __iomem *base)
writel(0, base + TIMER_CTRL);
}
-void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
+int __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
const char *name,
struct clk *clk,
int use_sched_clock)
@@ -89,14 +89,13 @@ void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
if (IS_ERR(clk)) {
pr_err("sp804: clock not found: %d\n",
(int)PTR_ERR(clk));
- return;
+ return PTR_ERR(clk);
}
}
rate = sp804_get_clock_rate(clk);
-
if (rate < 0)
- return;
+ return -EINVAL;
/* setup timer 0 as free-running clocksource */
writel(0, base + TIMER_CTRL);
@@ -112,6 +111,8 @@ void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
sched_clock_base = base;
sched_clock_register(sp804_read, 32, rate);
}
+
+ return 0;
}
@@ -186,7 +187,7 @@ static struct irqaction sp804_timer_irq = {
.dev_id = &sp804_clockevent,
};
-void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
+int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
{
struct clock_event_device *evt = &sp804_clockevent;
long rate;
@@ -196,12 +197,12 @@ void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struc
if (IS_ERR(clk)) {
pr_err("sp804: %s clock not found: %d\n", name,
(int)PTR_ERR(clk));
- return;
+ return PTR_ERR(clk);
}
rate = sp804_get_clock_rate(clk);
if (rate < 0)
- return;
+ return -EINVAL;
clkevt_base = base;
clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
@@ -213,27 +214,31 @@ void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struc
setup_irq(irq, &sp804_timer_irq);
clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
+
+ return 0;
}
-static void __init sp804_of_init(struct device_node *np)
+static int __init sp804_of_init(struct device_node *np)
{
static bool initialized = false;
void __iomem *base;
- int irq;
+ int irq, ret = -EINVAL;
u32 irq_num = 0;
struct clk *clk1, *clk2;
const char *name = of_get_property(np, "compatible", NULL);
base = of_iomap(np, 0);
- if (WARN_ON(!base))
- return;
+ if (!base)
+ return -ENXIO;
/* Ensure timers are disabled */
writel(0, base + TIMER_CTRL);
writel(0, base + TIMER_2_BASE + TIMER_CTRL);
- if (initialized || !of_device_is_available(np))
+ if (initialized || !of_device_is_available(np)) {
+ ret = -EINVAL;
goto err;
+ }
clk1 = of_clk_get(np, 0);
if (IS_ERR(clk1))
@@ -256,35 +261,53 @@ static void __init sp804_of_init(struct device_node *np)
of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
if (irq_num == 2) {
- __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
- __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+
+ ret = __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
+ if (ret)
+ goto err;
+
+ ret = __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+ if (ret)
+ goto err;
} else {
- __sp804_clockevents_init(base, irq, clk1 , name);
- __sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
- name, clk2, 1);
+
+ ret = __sp804_clockevents_init(base, irq, clk1 , name);
+ if (ret)
+ goto err;
+
+ ret =__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
+ name, clk2, 1);
+ if (ret)
+ goto err;
}
initialized = true;
- return;
+ return 0;
err:
iounmap(base);
+ return ret;
}
-CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
+CLOCKSOURCE_OF_DECLARE_RET(sp804, "arm,sp804", sp804_of_init);
-static void __init integrator_cp_of_init(struct device_node *np)
+static int __init integrator_cp_of_init(struct device_node *np)
{
static int init_count = 0;
void __iomem *base;
- int irq;
+ int irq, ret = -EINVAL;
const char *name = of_get_property(np, "compatible", NULL);
struct clk *clk;
base = of_iomap(np, 0);
- if (WARN_ON(!base))
- return;
+ if (!base) {
+ pr_err("Failed to iomap");
+ return -ENXIO;
+ }
+
clk = of_clk_get(np, 0);
- if (WARN_ON(IS_ERR(clk)))
- return;
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get clock");
+ return PTR_ERR(clk);
+ }
/* Ensure timer is disabled */
writel(0, base + TIMER_CTRL);
@@ -292,19 +315,25 @@ static void __init integrator_cp_of_init(struct device_node *np)
if (init_count == 2 || !of_device_is_available(np))
goto err;
- if (!init_count)
- __sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
- else {
+ if (!init_count) {
+ ret = __sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
+ if (ret)
+ goto err;
+
+ } else {
irq = irq_of_parse_and_map(np, 0);
if (irq <= 0)
goto err;
- __sp804_clockevents_init(base, irq, clk, name);
+ ret = __sp804_clockevents_init(base, irq, clk, name);
+ if (ret)
+ goto err;
}
init_count++;
- return;
+ return 0;
err:
iounmap(base);
+ return ret;
}
-CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);
+CLOCKSOURCE_OF_DECLARE_RET(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);
--
1.9.1
next prev parent reply other threads:[~2016-06-16 21:34 UTC|newest]
Thread overview: 112+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-16 21:26 [PATCH V2 00/63] clocksource/drivers/clksrc-of: Improve error handling Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 01/63] of: Add a new macro to declare_of for one parameter function returning a value Daniel Lezcano
2016-06-20 21:03 ` Rob Herring
2016-06-16 21:26 ` [PATCH V2 02/63] clocksource/drivers/clksrc-probe: Introduce init functions with return code Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 03/63] clocksource/drivers/rockchip_timer: Convert init function to return error Daniel Lezcano
2016-06-18 10:38 ` Heiko Stübner
2016-06-18 12:54 ` [PATCH V3] " Daniel Lezcano
2016-06-18 13:47 ` Heiko Stübner
2016-06-16 21:26 ` [PATCH V2 04/63] clocksource/drivers/mkt_timer: " Daniel Lezcano
2016-06-17 16:16 ` Matthias Brugger
2016-06-16 21:26 ` [PATCH V2 05/63] clocksource/drivers/exynos_mct: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 06/63] clocksource/drivers/asm9260: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 07/63] clocksource/drivers/cadence_ttc: " Daniel Lezcano
2016-06-16 21:43 ` Sören Brinkmann
2016-06-16 21:26 ` [PATCH V2 08/63] clocksource/drivers/st_lpc: " Daniel Lezcano
2016-06-20 7:39 ` Patrice Chotard
2016-06-20 11:33 ` Maxime Coquelin
2016-06-16 21:26 ` [PATCH V2 09/63] clocksource/drivers/dw_apb_timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 10/63] clocksource/drivers/clps711x: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 11/63] clocksource/drivers/digitcolor: " Daniel Lezcano
2016-06-17 3:15 ` Baruch Siach
2016-06-16 21:26 ` [PATCH V2 12/63] clocksource/drivers/armv7m_systick: " Daniel Lezcano
2016-06-20 11:31 ` Maxime Coquelin
2016-06-16 21:26 ` [PATCH V2 13/63] clocksource/drivers/bcm2835_timer: " Daniel Lezcano
2016-06-26 3:10 ` Eric Anholt
2016-06-16 21:26 ` [PATCH V2 14/63] clocksource/drivers/bcm_kona: " Daniel Lezcano
2016-06-20 17:22 ` Ray Jui
2016-06-20 17:40 ` Daniel Lezcano
2016-06-20 17:48 ` [PATCH V3] " Daniel Lezcano
2016-06-20 17:50 ` Ray Jui
2016-06-20 20:12 ` Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 15/63] clocksource/drivers/clksrc-dbx500: " Daniel Lezcano
2016-06-17 16:10 ` Linus Walleij
2016-06-16 21:26 ` [PATCH V2 16/63] clocksource/drivers/fsl_ftm_timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 17/63] clocksource/drivers/arm_arch_timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 18/63] clocksource/drivers/arm_global_timer: " Daniel Lezcano
2016-06-20 11:32 ` Maxime Coquelin
2016-06-16 21:26 ` [PATCH V2 19/63] clocksource/drivers/h8300_timer16: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 20/63] clocksource/drivers/h8300_tpu: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 21/63] " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 22/63] clocksource/drivers/mips-gic-timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 23/63] clocksource/drivers/moxart_timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 24/63] clocksource/drivers/mps2-timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 25/63] clocksource/drivers/mxs_timer: " Daniel Lezcano
2016-06-17 6:33 ` Uwe Kleine-König
2016-06-17 10:43 ` [PATCH V3] clocksource/drivers/mxs: " Daniel Lezcano
2016-06-20 9:15 ` [PATCH V2 25/63] clocksource/drivers/mxs_timer: " Liviu Dudau
2016-06-20 9:24 ` Daniel Lezcano
2016-06-20 9:26 ` [PATCH V3] clocksource/drivers/mps2-timer: " Daniel Lezcano
2016-06-20 9:42 ` liviu.dudau
2016-06-16 21:26 ` [PATCH V2 26/63] clocksource/drivers/nomadik-mtu: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 27/63] clocksource/drivers/pxa_timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 28/63] clocksource/drivers/qcom-timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 29/63] clocksource/drivers/samsung_pwm_timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 30/63] clocksource/drivers/sun4i_time: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 31/63] clocksource/drivers/tango_xtal: " Daniel Lezcano
2016-06-17 9:19 ` Mason
2016-06-17 10:26 ` [PATCH V3] " Daniel Lezcano
2016-06-17 12:35 ` Marc Gonzalez
2016-06-17 12:43 ` Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 32/63] clocksource/drivers/tegra20_timer: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 33/63] clocksource/drivers/time-armada-370-xp: " Daniel Lezcano
2016-06-17 7:21 ` Jon Hunter
2016-06-17 8:09 ` Daniel Lezcano
2016-06-17 9:06 ` [PATCH V3] clocksource/drivers/tegra20: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 34/63] clocksource/drivers/time-efm32: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 35/63] clocksource/drivers/time-lpc32xx: " Daniel Lezcano
2016-06-17 6:52 ` Uwe Kleine-König
2016-06-17 8:44 ` [PATCH V3] clocksource/drivers/time-efm32: " Daniel Lezcano
2016-06-17 9:46 ` Uwe Kleine-König
2016-06-16 21:26 ` [PATCH V2 36/63] clocksource/drivers/time-orion: " Daniel Lezcano
2016-06-20 17:08 ` Sylvain Lemieux
2016-06-16 21:26 ` [PATCH V2 37/63] clocksource/drivers/time-pistachio: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 38/63] " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 39/63] clocksource/drivers/timer-atlas7: " Daniel Lezcano
2016-06-16 21:26 ` [PATCH V2 40/63] clocksource/drivers/timer-atmel-pit: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 41/63] clocksource/drivers/timer-atmel-st: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 42/63] clocksource/drivers/prima2: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 43/63] clocksource/drivers/timer-imx-gpt: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 44/63] clocksource/drivers/timer-integrator-ap: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 45/63] clocksource/drivers/timer-keystone: " Daniel Lezcano
2016-06-17 16:03 ` Santosh Shilimkar
2016-06-16 21:27 ` Daniel Lezcano [this message]
2016-06-16 21:27 ` [PATCH V2 47/63] clocksource/drivers/timer-stm32: " Daniel Lezcano
2016-06-20 11:32 ` Maxime Coquelin
2016-06-16 21:27 ` [PATCH V2 48/63] clocksource/drivers/timer-sun5i: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 49/63] clocksource/drivers/timer-ti-32k: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 50/63] clocksource/drivers/timer-u300: " Daniel Lezcano
2016-06-17 16:11 ` Linus Walleij
2016-06-16 21:27 ` [PATCH V2 51/63] clocksource/drivers/versatile: " Daniel Lezcano
2016-06-20 9:13 ` Liviu Dudau
2016-06-16 21:27 ` [PATCH V2 52/63] clocksource/drivers/vf_pit_timer: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 53/63] clocksource/drivers/vt8500_timer: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 54/63] clocksource/drivers/zevio-timer: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 55/63] clocksource/drivers/timer-sp804: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 56/63] clocksource/drivers/microblaze: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 57/63] clocksource/drivers/ralink: " Daniel Lezcano
2016-06-17 8:54 ` John Crispin
2016-06-16 21:27 ` [PATCH V2 58/63] clocksource/drivers/nios2: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 59/63] clocksource/drivers/smp_twd: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 60/63] clocksource/drivers/nps: " Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 61/63] clocksource/drivers/arc: " Daniel Lezcano
2016-06-17 8:59 ` Vineet Gupta
2016-06-17 10:09 ` [PATCH V3] " Daniel Lezcano
2016-06-17 14:30 ` Vineet Gupta
2016-06-24 4:06 ` Vineet Gupta
2016-06-24 6:41 ` Daniel Lezcano
2016-06-24 7:52 ` Vineet Gupta
2016-06-24 7:55 ` Daniel Lezcano
2016-06-16 21:27 ` [PATCH V2 62/63] clocksource/drivers/oxnas-rps: " Daniel Lezcano
2016-06-17 6:58 ` Neil Armstrong
[not found] ` <1466112442-31105-64-git-send-email-daniel.lezcano@linaro.org>
2016-06-17 14:33 ` [PATCH V2 63/63] clocksources: Switch back to the clksrc table Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466112442-31105-47-git-send-email-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®