From: Philippe Reynes <tremyfr@gmail.com>
To: mans@mansr.com, davem@davemloft.net, sf84@laposte.net, arnd@arndb.de
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH 1/2] net: ethernet: nb8800: use phydev from struct net_device
Date: Sat, 18 Jun 2016 23:16:54 +0200 [thread overview]
Message-ID: <1466284615-7045-1-git-send-email-tremyfr@gmail.com> (raw)
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/aurora/nb8800.c | 57 +++++++++++++++++----------------
drivers/net/ethernet/aurora/nb8800.h | 1 -
2 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c
index 08a23e6..4989d31 100644
--- a/drivers/net/ethernet/aurora/nb8800.c
+++ b/drivers/net/ethernet/aurora/nb8800.c
@@ -631,7 +631,7 @@ static void nb8800_mac_config(struct net_device *dev)
static void nb8800_pause_config(struct net_device *dev)
{
struct nb8800_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = priv->phydev;
+ struct phy_device *phydev = dev->phydev;
u32 rxcr;
if (priv->pause_aneg) {
@@ -664,7 +664,7 @@ static void nb8800_pause_config(struct net_device *dev)
static void nb8800_link_reconfigure(struct net_device *dev)
{
struct nb8800_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = priv->phydev;
+ struct phy_device *phydev = dev->phydev;
int change = 0;
if (phydev->link) {
@@ -690,7 +690,7 @@ static void nb8800_link_reconfigure(struct net_device *dev)
}
if (change)
- phy_print_status(priv->phydev);
+ phy_print_status(phydev);
}
static void nb8800_update_mac_addr(struct net_device *dev)
@@ -935,9 +935,10 @@ static int nb8800_dma_stop(struct net_device *dev)
static void nb8800_pause_adv(struct net_device *dev)
{
struct nb8800_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = dev->phydev;
u32 adv = 0;
- if (!priv->phydev)
+ if (!phydev)
return;
if (priv->pause_rx)
@@ -945,13 +946,14 @@ static void nb8800_pause_adv(struct net_device *dev)
if (priv->pause_tx)
adv ^= ADVERTISED_Asym_Pause;
- priv->phydev->supported |= adv;
- priv->phydev->advertising |= adv;
+ phydev->supported |= adv;
+ phydev->advertising |= adv;
}
static int nb8800_open(struct net_device *dev)
{
struct nb8800_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev;
int err;
/* clear any pending interrupts */
@@ -969,10 +971,10 @@ static int nb8800_open(struct net_device *dev)
nb8800_mac_rx(dev, true);
nb8800_mac_tx(dev, true);
- priv->phydev = of_phy_connect(dev, priv->phy_node,
- nb8800_link_reconfigure, 0,
- priv->phy_mode);
- if (!priv->phydev)
+ phydev = of_phy_connect(dev, priv->phy_node,
+ nb8800_link_reconfigure, 0,
+ priv->phy_mode);
+ if (!phydev)
goto err_free_irq;
nb8800_pause_adv(dev);
@@ -982,7 +984,7 @@ static int nb8800_open(struct net_device *dev)
netif_start_queue(dev);
nb8800_start_rx(dev);
- phy_start(priv->phydev);
+ phy_start(phydev);
return 0;
@@ -997,8 +999,9 @@ err_free_dma:
static int nb8800_stop(struct net_device *dev)
{
struct nb8800_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = dev->phydev;
- phy_stop(priv->phydev);
+ phy_stop(phydev);
netif_stop_queue(dev);
napi_disable(&priv->napi);
@@ -1007,8 +1010,7 @@ static int nb8800_stop(struct net_device *dev)
nb8800_mac_rx(dev, false);
nb8800_mac_tx(dev, false);
- phy_disconnect(priv->phydev);
- priv->phydev = NULL;
+ phy_disconnect(phydev);
free_irq(dev->irq, dev);
@@ -1019,9 +1021,7 @@ static int nb8800_stop(struct net_device *dev)
static int nb8800_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
- struct nb8800_priv *priv = netdev_priv(dev);
-
- return phy_mii_ioctl(priv->phydev, rq, cmd);
+ return phy_mii_ioctl(dev->phydev, rq, cmd);
}
static const struct net_device_ops nb8800_netdev_ops = {
@@ -1037,32 +1037,32 @@ static const struct net_device_ops nb8800_netdev_ops = {
static int nb8800_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct nb8800_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = dev->phydev;
- if (!priv->phydev)
+ if (!phydev)
return -ENODEV;
- return phy_ethtool_gset(priv->phydev, cmd);
+ return phy_ethtool_gset(phydev, cmd);
}
static int nb8800_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct nb8800_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = dev->phydev;
- if (!priv->phydev)
+ if (!phydev)
return -ENODEV;
- return phy_ethtool_sset(priv->phydev, cmd);
+ return phy_ethtool_sset(phydev, cmd);
}
static int nb8800_nway_reset(struct net_device *dev)
{
- struct nb8800_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = dev->phydev;
- if (!priv->phydev)
+ if (!phydev)
return -ENODEV;
- return genphy_restart_aneg(priv->phydev);
+ return genphy_restart_aneg(phydev);
}
static void nb8800_get_pauseparam(struct net_device *dev,
@@ -1079,6 +1079,7 @@ static int nb8800_set_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pp)
{
struct nb8800_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = dev->phydev;
priv->pause_aneg = pp->autoneg;
priv->pause_rx = pp->rx_pause;
@@ -1088,8 +1089,8 @@ static int nb8800_set_pauseparam(struct net_device *dev,
if (!priv->pause_aneg)
nb8800_pause_config(dev);
- else if (priv->phydev)
- phy_start_aneg(priv->phydev);
+ else if (phydev)
+ phy_start_aneg(phydev);
return 0;
}
diff --git a/drivers/net/ethernet/aurora/nb8800.h b/drivers/net/ethernet/aurora/nb8800.h
index e5adbc2..6ec4a95 100644
--- a/drivers/net/ethernet/aurora/nb8800.h
+++ b/drivers/net/ethernet/aurora/nb8800.h
@@ -284,7 +284,6 @@ struct nb8800_priv {
struct mii_bus *mii_bus;
struct device_node *phy_node;
- struct phy_device *phydev;
/* PHY connection type from DT */
int phy_mode;
--
1.7.4.4
next reply other threads:[~2016-06-18 21:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-18 21:16 Philippe Reynes [this message]
2016-06-18 21:16 ` [PATCH 2/2] net: ethernet: nb8800: use phy_ethtool_{get|set}_link_ksettings Philippe Reynes
2016-06-19 11:32 ` Måns Rullgård
2016-06-19 17:55 ` David Miller
2016-06-19 11:31 ` [PATCH 1/2] net: ethernet: nb8800: use phydev from struct net_device Måns Rullgård
2016-06-19 17:55 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466284615-7045-1-git-send-email-tremyfr@gmail.com \
--to=tremyfr@gmail.com \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mans@mansr.com \
--cc=netdev@vger.kernel.org \
--cc=sf84@laposte.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome