From: Keerthy <j-keerthy@ti.com>
To: <tony@atomide.com>, <broonie@kernel.org>, <devicetree@vger.kernel.org>
Cc: <linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<t-kristo@ti.com>, <russ.dill@ti.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <j-keerthy@ti.com>,
<linux@armlinux.org.uk>
Subject: [PATCH 4/9] ARM: dts: AM437X-GP-EVM: AM437X-SK-EVM: Make dcdc3 dcdc5 and dcdc6 enable during suspend
Date: Mon, 20 Jun 2016 14:13:33 +0530 [thread overview]
Message-ID: <1466412218-5906-5-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1466412218-5906-1-git-send-email-j-keerthy@ti.com>
dcdc3, dcdc5, dcdc6 supply ddr and rtc respectively. These
are required to be on during suspend. Hence set the state accordingly.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 10 ++++++++++
arch/arm/boot/dts/am437x-sk-evm.dts | 27 +++++++++++++++++++++++++++
2 files changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 84832bf..7b7ccc0 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -537,7 +537,11 @@
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
+
dcdc5: regulator-dcdc5 {
compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
@@ -545,6 +549,9 @@
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
dcdc6: regulator-dcdc6 {
@@ -554,6 +561,9 @@
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo1: regulator-ldo1 {
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index d82dd6e..03e3d02 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -454,6 +454,9 @@
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
dcdc4: regulator-dcdc4 {
@@ -465,6 +468,30 @@
regulator-always-on;
};
+ dcdc5: regulator-dcdc5 {
+ compatible = "ti,tps65218-dcdc5";
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ dcdc6: regulator-dcdc6 {
+ compatible = "ti,tps65218-dcdc6";
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
ldo1: regulator-ldo1 {
compatible = "ti,tps65218-ldo1";
regulator-name = "v1_8d";
--
1.9.1
next prev parent reply other threads:[~2016-06-20 9:02 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-20 8:43 [PATCH 0/9] regulator: Enable suspend configuration Keerthy
2016-06-20 8:43 ` [PATCH 1/9] regulator: tps65217: " Keerthy
2016-06-21 19:08 ` Mark Brown
2016-06-22 10:14 ` Keerthy
2016-06-22 10:16 ` Mark Brown
2016-06-22 10:26 ` Keerthy
2016-06-23 10:26 ` Mark Brown
2016-06-23 10:32 ` Keerthy
2016-06-20 8:43 ` [PATCH 2/9] regulator: of: setup initial suspend state Keerthy
2016-06-22 15:29 ` Applied "regulator: of: setup initial suspend state" to the regulator tree Mark Brown
2016-06-20 8:43 ` [PATCH 3/9] regulator: tps65218: Enable suspend configuration Keerthy
2016-06-27 17:00 ` Applied "regulator: tps65218: Enable suspend configuration" to the regulator tree Mark Brown
2016-06-20 8:43 ` Keerthy [this message]
2016-06-21 11:43 ` [PATCH 4/9] ARM: dts: AM437X-GP-EVM: AM437X-SK-EVM: Make dcdc3 dcdc5 and dcdc6 enable during suspend Tony Lindgren
2016-06-21 11:46 ` Tony Lindgren
2016-06-20 8:43 ` [PATCH 5/9] regulator: tps65218: force set power-up/down strobe to 3 for dcdc3 Keerthy
2016-06-27 17:00 ` Applied "regulator: tps65218: force set power-up/down strobe to 3 for dcdc3" to the regulator tree Mark Brown
2016-06-20 8:43 ` [PATCH 6/9] ARM: dts: am437x-gp-evm: disable DDR regulator in rtc-only/poweroff mode Keerthy
2016-06-20 8:43 ` [PATCH 7/9] mfd: tps65218: add version check to the PMIC probe Keerthy
2016-06-20 8:45 ` Keerthy
2016-08-10 20:04 ` Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree Mark Brown
2016-08-31 8:31 ` Lee Jones
2016-08-31 11:41 ` Mark Brown
2016-08-31 14:50 ` Lee Jones
2016-08-31 16:02 ` Mark Brown
2016-09-01 8:23 ` Lee Jones
2016-09-01 8:54 ` Mark Brown
2016-09-01 9:34 ` Lee Jones
2016-08-31 17:57 ` Russell King - ARM Linux
2016-09-01 8:18 ` Lee Jones
2016-09-01 10:17 ` Russell King - ARM Linux
2016-09-01 11:19 ` Lee Jones
2016-09-01 14:23 ` Russell King - ARM Linux
2016-09-01 14:53 ` Lee Jones
2016-06-20 8:43 ` [PATCH 8/9] regulator: tps65218: do not disable DCDC3 during poweroff on broken PMICs Keerthy
2016-08-10 20:04 ` Applied "regulator: tps65218: do not disable DCDC3 during poweroff on broken PMICs" to the regulator tree Mark Brown
2016-08-31 15:01 ` Lee Jones
2016-09-01 10:06 ` Mark Brown
2016-06-20 8:43 ` [PATCH 9/9] ARM: dts: am437x-sk-evm: disable DDR regulator in rtc-only/poweroff mode Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466412218-5906-5-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=russ.dill@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®