From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
linux-mtd@lists.infradead.org,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Richard Weinberger <richard@nod.at>
Cc: linux-kernel@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>,
Aleksei Mamlin <mamlinav@gmail.com>,
valdis.kletnieks@vt.edu
Subject: [PATCH v3 03/16] mtd: nand: store nand ID in struct nand_chip
Date: Mon, 20 Jun 2016 11:26:49 +0200 [thread overview]
Message-ID: <1466414822-18948-4-git-send-email-boris.brezillon@free-electrons.com> (raw)
In-Reply-To: <1466414822-18948-1-git-send-email-boris.brezillon@free-electrons.com>
Store the NAND ID in struct nand_chip to avoid passing id_data and id_len
as function parameters.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/nand_base.c | 55 ++++++++++++++++++++++++--------------------
include/linux/mtd/nand.h | 13 +++++++++++
2 files changed, 43 insertions(+), 25 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index a0ce1b5c9df2..f890f3e2eaa3 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3585,18 +3585,16 @@ static int nand_get_bits_per_cell(u8 cellinfo)
* chip. The rest of the parameters must be decoded according to generic or
* manufacturer-specific "extended ID" decoding patterns.
*/
-static void nand_decode_ext_id(struct nand_chip *chip, u8 id_data[8],
- int *busw)
+static void nand_decode_ext_id(struct nand_chip *chip, int *busw)
{
struct mtd_info *mtd = nand_to_mtd(chip);
- int extid, id_len;
+ int extid, id_len = chip->id.len;
+ u8 *id_data = chip->id.data;
/* The 3rd id byte holds MLC / multichip data */
chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
/* The 4th id byte is the important one */
extid = id_data[3];
- id_len = nand_id_len(id_data, 8);
-
/*
* Field definitions are in the following datasheets:
* Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
@@ -3720,9 +3718,10 @@ static void nand_decode_ext_id(struct nand_chip *chip, u8 id_data[8],
* the chip.
*/
static void nand_decode_id(struct nand_chip *chip, struct nand_flash_dev *type,
- u8 id_data[8], int *busw)
+ int *busw)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ u8 *id_data = chip->id.data;
int maf_id = id_data[0];
mtd->erasesize = type->erasesize;
@@ -3752,9 +3751,10 @@ static void nand_decode_id(struct nand_chip *chip, struct nand_flash_dev *type,
* heuristic patterns using various detected parameters (e.g., manufacturer,
* page size, cell-type information).
*/
-static void nand_decode_bbm_options(struct nand_chip *chip, u8 id_data[8])
+static void nand_decode_bbm_options(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ u8 *id_data = chip->id.data;
int maf_id = id_data[0];
/* Set the bad block position */
@@ -3790,10 +3790,10 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type)
}
static bool find_full_id_nand(struct nand_chip *chip,
- struct nand_flash_dev *type, u8 *id_data,
- int *busw)
+ struct nand_flash_dev *type, int *busw)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ u8 *id_data = chip->id.data;
if (!strncmp(type->id, id_data, type->id_len)) {
mtd->writesize = type->pagesize;
@@ -3822,13 +3822,13 @@ static bool find_full_id_nand(struct nand_chip *chip,
* Get the flash and manufacturer id and lookup if the type is supported.
*/
static struct nand_flash_dev *nand_get_flash_type(struct nand_chip *chip,
- int *maf_id, int *dev_id,
struct nand_flash_dev *type)
{
struct mtd_info *mtd = nand_to_mtd(chip);
int busw;
int i, maf_idx;
- u8 id_data[8];
+ u8 *id_data = chip->id.data;
+ u8 maf_id, dev_id;
/* Select the device */
chip->select_chip(mtd, 0);
@@ -3843,8 +3843,8 @@ static struct nand_flash_dev *nand_get_flash_type(struct nand_chip *chip,
chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
/* Read manufacturer and device IDs */
- *maf_id = chip->read_byte(mtd);
- *dev_id = chip->read_byte(mtd);
+ maf_id = chip->read_byte(mtd);
+ dev_id = chip->read_byte(mtd);
/*
* Try again to make sure, as some systems the bus-hold or other
@@ -3859,20 +3859,22 @@ static struct nand_flash_dev *nand_get_flash_type(struct nand_chip *chip,
for (i = 0; i < 8; i++)
id_data[i] = chip->read_byte(mtd);
- if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
+ if (id_data[0] != maf_id || id_data[1] != dev_id) {
pr_info("second ID read did not match %02x,%02x against %02x,%02x\n",
- *maf_id, *dev_id, id_data[0], id_data[1]);
+ maf_id, dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
+ chip->id.len = nand_id_len(id_data, 8);
+
if (!type)
type = nand_flash_ids;
for (; type->name != NULL; type++) {
if (is_full_id_nand(type)) {
- if (find_full_id_nand(chip, type, id_data, &busw))
+ if (find_full_id_nand(chip, type, &busw))
goto ident_done;
- } else if (*dev_id == type->dev_id) {
+ } else if (dev_id == type->dev_id) {
break;
}
}
@@ -3898,9 +3900,9 @@ static struct nand_flash_dev *nand_get_flash_type(struct nand_chip *chip,
if (!type->pagesize) {
/* Decode parameters from extended ID */
- nand_decode_ext_id(chip, id_data, &busw);
+ nand_decode_ext_id(chip, &busw);
} else {
- nand_decode_id(chip, type, id_data, &busw);
+ nand_decode_id(chip, type, &busw);
}
/* Get chip options */
chip->options |= type->options;
@@ -3909,13 +3911,13 @@ static struct nand_flash_dev *nand_get_flash_type(struct nand_chip *chip,
* Check if chip is not a Samsung device. Do not clear the
* options for chips which do not have an extended id.
*/
- if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
+ if (maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
ident_done:
/* Try to identify manufacturer */
for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
- if (nand_manuf_ids[maf_idx].id == *maf_id)
+ if (nand_manuf_ids[maf_idx].id == maf_id)
break;
}
@@ -3929,7 +3931,7 @@ ident_done:
* chip correct!
*/
pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
- *maf_id, *dev_id);
+ maf_id, dev_id);
pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, mtd->name);
pr_warn("bus width %d instead %d bit\n",
(chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
@@ -3937,7 +3939,7 @@ ident_done:
return ERR_PTR(-EINVAL);
}
- nand_decode_bbm_options(chip, id_data);
+ nand_decode_bbm_options(chip);
/* Calculate the address shift from the page size */
chip->page_shift = ffs(mtd->writesize) - 1;
@@ -3961,7 +3963,7 @@ ident_done:
chip->cmdfunc = nand_command_lp;
pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
- *maf_id, *dev_id);
+ maf_id, dev_id);
if (chip->onfi_version)
pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
@@ -4153,7 +4155,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
/* Read the flash type */
- type = nand_get_flash_type(chip, &nand_maf_id, &nand_dev_id, table);
+ type = nand_get_flash_type(chip, table);
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
@@ -4162,6 +4164,9 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
return PTR_ERR(type);
}
+ nand_maf_id = chip->id.data[0];
+ nand_dev_id = chip->id.data[1];
+
chip->select_chip(mtd, -1);
/* Check for a chip array */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index fbe8e164a4ee..3072f5ee0fef 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -447,6 +447,17 @@ struct nand_jedec_params {
} __packed;
/**
+ * struct nand_id - NAND id structure
+ * @data: buffer containing the id bytes. Currently 8 bytes large, but can
+ * be extended if required.
+ * @len: ID length.
+ */
+struct nand_id {
+ u8 data[8];
+ int len;
+};
+
+/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
* @active: the mtd device which holds the controller currently
@@ -639,6 +650,7 @@ struct nand_buffers {
* @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is
* currently in data_buf.
* @subpagesize: [INTERN] holds the subpagesize
+ * @id: [INTERN] holds NAND ID
* @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
* non 0 if ONFI supported.
* @jedec_version: [INTERN] holds the chip JEDEC version (BCD encoded),
@@ -718,6 +730,7 @@ struct nand_chip {
int badblockpos;
int badblockbits;
+ struct nand_id id;
int onfi_version;
int jedec_version;
union {
--
2.7.4
next prev parent reply other threads:[~2016-06-20 9:37 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-20 9:26 [PATCH v3 00/16] mtd: nand: allow vendor specific detection/initialization Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 01/16] mtd: nand: Fix nand_command_lp() for 8bits opcodes Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 02/16] mtd: nand: get rid of the mtd parameter in all auto-detection functions Boris Brezillon
2016-06-20 9:26 ` Boris Brezillon [this message]
2016-06-20 9:26 ` [PATCH v3 04/16] mtd: nand: get rid of busw parameter Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 05/16] mtd: nand: rename nand_get_flash_type() into nand_detect() Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 06/16] mtd: nand: add manufacturer specific initialization/detection steps Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 07/16] mtd: nand: kill the MTD_NAND_IDS Kconfig option Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 08/16] mtd: nand: move Samsung specific init/detection logic in nand_samsung.c Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 09/16] mtd: nand: move Hynix specific init/detection logic in nand_hynix.c Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 10/16] mtd: nand: move Toshiba specific init/detection logic in nand_toshiba.c Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 11/16] mtd: nand: move Micron specific init logic in nand_micron.c Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 12/16] mtd: nand: move AMD/Spansion specific init/detection logic in nand_amd.c Boris Brezillon
2016-06-20 9:26 ` [PATCH v3 13/16] mtd: nand: move Macronix specific initialization in nand_macronix.c Boris Brezillon
2016-06-20 9:27 ` [PATCH v3 14/16] mtd: nand: samsung: retrieve ECC requirements from extended ID Boris Brezillon
2016-06-20 9:27 ` [PATCH v3 15/16] mtd: nand: hynix: rework NAND ID decoding to extract more information Boris Brezillon
2016-06-20 9:27 ` [PATCH v3 16/16] mtd: nand: hynix: add read-retry support for 1x nm MLC NANDs Boris Brezillon
2016-06-20 9:31 ` [PATCH v3 00/16] mtd: nand: allow vendor specific detection/initialization Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466414822-18948-4-git-send-email-boris.brezillon@free-electrons.com \
--to=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=mamlinav@gmail.com \
--cc=richard@nod.at \
--cc=valdis.kletnieks@vt.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®