From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752311AbcF0TVq (ORCPT ); Mon, 27 Jun 2016 15:21:46 -0400 Received: from lists.s-osg.org ([54.187.51.154]:39685 "EHLO lists.s-osg.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752213AbcF0TVo (ORCPT ); Mon, 27 Jun 2016 15:21:44 -0400 From: Javier Martinez Canillas To: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org, Tony Lindgren , Javier Martinez Canillas Subject: [PATCH 06/27] ARM: dts: omap3-beagle-xm: remove unneeded unit names Date: Mon, 27 Jun 2016 15:20:47 -0400 Message-Id: <1467055268-13194-7-git-send-email-javier@osg.samsung.com> X-Mailer: git-send-email 2.5.5 In-Reply-To: <1467055268-13194-1-git-send-email-javier@osg.samsung.com> References: <1467055268-13194-1-git-send-email-javier@osg.samsung.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch fixes the following DTC warnings for omap3-beagle-xm.dtb: "encoder@0 has a unit name, but no reg property" "encoder@0/ports/port@0/endpoint@0 has a unit name, but no reg property" "encoder@0/ports/port@1/endpoint@0 has a unit name, but no reg property" "connector@0 has a unit name, but no reg property" "connector@1 has a unit name, but no reg property" Signed-off-by: Javier Martinez Canillas --- arch/arm/boot/dts/omap3-beagle-xm.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 01e1e2d5c735..8ffde06281ad 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -91,7 +91,7 @@ vcc-supply = <&hsusb2_power>; }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; @@ -104,7 +104,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -112,14 +112,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector0 { compatible = "dvi-connector"; label = "dvi"; @@ -134,7 +134,7 @@ }; }; - tv0: connector@1 { + tv0: connector1 { compatible = "svideo-connector"; label = "tv"; -- 2.5.5