From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752368AbcF0TVx (ORCPT ); Mon, 27 Jun 2016 15:21:53 -0400 Received: from lists.s-osg.org ([54.187.51.154]:39691 "EHLO lists.s-osg.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752344AbcF0TVv (ORCPT ); Mon, 27 Jun 2016 15:21:51 -0400 From: Javier Martinez Canillas To: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org, Tony Lindgren , Javier Martinez Canillas Subject: [PATCH 08/27] ARM: dts: omap3-devkit8000: remove unneeded unit names Date: Mon, 27 Jun 2016 15:20:49 -0400 Message-Id: <1467055268-13194-9-git-send-email-javier@osg.samsung.com> X-Mailer: git-send-email 2.5.5 In-Reply-To: <1467055268-13194-1-git-send-email-javier@osg.samsung.com> References: <1467055268-13194-1-git-send-email-javier@osg.samsung.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch fixes the following DTC warnings for omap3-devkit8000.dtb, omap3-devkit8000-lcd43.dtb and omap3-devkit8000-lcd70.dtb: "encoder@0 has a unit name, but no reg property" "endpoint@0 has a unit name, but no reg property" "connector@0 has a unit name, but no reg property" "connector@1 has a unit name, but no reg property" Signed-off-by: Javier Martinez Canillas --- arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index b1b8ebf90c1c..586010179752 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -68,7 +68,7 @@ }; }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>; @@ -79,7 +79,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_dvi_out>; }; }; @@ -87,14 +87,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector0 { compatible = "dvi-connector"; label = "dvi"; @@ -109,7 +109,7 @@ }; }; - tv0: connector@1 { + tv0: connector1 { compatible = "svideo-connector"; label = "tv"; @@ -352,7 +352,7 @@ vdda_dac-supply = <&vdac>; port { - dpi_dvi_out: endpoint@0 { + dpi_dvi_out: endpoint { remote-endpoint = <&tfp410_in>; data-lines = <24>; }; -- 2.5.5