From: Quentin Schulz <quentin.schulz@free-electrons.com>
To: jdelvare@suse.com, linux@roeck-us.net, jic23@kernel.org,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
maxime.ripard@free-electrons.com, wens@csie.org,
lee.jones@linaro.org
Cc: Quentin Schulz <quentin.schulz@free-electrons.com>,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-iio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
thomas.petazzoni@free-electrons.com,
antoine.tenart@free-electrons.com
Subject: [PATCH 1/3] mfd: add support for Allwinner SoCs ADC
Date: Tue, 28 Jun 2016 10:18:15 +0200 [thread overview]
Message-ID: <1467101897-15946-2-git-send-email-quentin.schulz@free-electrons.com> (raw)
In-Reply-To: <1467101897-15946-1-git-send-email-quentin.schulz@free-electrons.com>
The Allwinner SoCs all have an ADC that can also act as a touchscreen
controller and a thermal sensor. For now, only the ADC and the thermal
sensor drivers are probed by the MFD, the touchscreen controller support
will be added later.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
---
drivers/mfd/Kconfig | 14 +++
drivers/mfd/Makefile | 2 +
drivers/mfd/sunxi-gpadc-mfd.c | 188 ++++++++++++++++++++++++++++++++++++
include/linux/mfd/sunxi-gpadc-mfd.h | 14 +++
4 files changed, 218 insertions(+)
create mode 100644 drivers/mfd/sunxi-gpadc-mfd.c
create mode 100644 include/linux/mfd/sunxi-gpadc-mfd.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index eea61e3..1663db9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -82,6 +82,20 @@ config MFD_ATMEL_FLEXCOM
by the probe function of this MFD driver according to a device tree
property.
+config MFD_SUNXI_ADC
+ tristate "ADC MFD core driver for sunxi platforms"
+ select MFD_CORE
+ select REGMAP_MMIO
+ help
+ Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC.
+ This driver will only map the hardware interrupt and registers, you
+ have to select individual drivers based on this MFD to be able to use
+ the ADC or the thermal sensor. This will try to probe the ADC driver
+ sunxi-gpadc-iio and the hwmon driver iio_hwmon.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sunxi-gpadc-mfd.
+
config MFD_ATMEL_HLCDC
tristate "Atmel HLCDC (High-end LCD Controller)"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5eaa6465d..b280d0a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -199,6 +199,8 @@ obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
obj-$(CONFIG_MFD_SKY81452) += sky81452.o
+obj-$(CONFIG_MFD_SUNXI_ADC) += sunxi-gpadc-mfd.o
+
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
diff --git a/drivers/mfd/sunxi-gpadc-mfd.c b/drivers/mfd/sunxi-gpadc-mfd.c
new file mode 100644
index 0000000..710e297
--- /dev/null
+++ b/drivers/mfd/sunxi-gpadc-mfd.c
@@ -0,0 +1,188 @@
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/mfd/sunxi-gpadc-mfd.h>
+#include <linux/mfd/core.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#define SUNXI_IRQ_FIFO_DATA 0
+#define SUNXI_IRQ_TEMP_DATA 1
+
+static struct resource adc_resources[] = {
+ {
+ .name = "FIFO_DATA_PENDING",
+ .start = SUNXI_IRQ_FIFO_DATA,
+ .end = SUNXI_IRQ_FIFO_DATA,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "TEMP_DATA_PENDING",
+ .start = SUNXI_IRQ_TEMP_DATA,
+ .end = SUNXI_IRQ_TEMP_DATA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static const struct regmap_irq sunxi_gpadc_mfd_regmap_irq[] = {
+ REGMAP_IRQ_REG(SUNXI_IRQ_FIFO_DATA, 0, BIT(16)),
+ REGMAP_IRQ_REG(SUNXI_IRQ_TEMP_DATA, 0, BIT(18)),
+};
+
+static const struct regmap_irq_chip sunxi_gpadc_mfd_regmap_irq_chip = {
+ .name = "sunxi_gpadc_mfd_irq_chip",
+ .status_base = TP_INT_FIFOS,
+ .ack_base = TP_INT_FIFOS,
+ .mask_base = TP_INT_FIFOC,
+ .init_ack_masked = true,
+ .mask_invert = true,
+ .irqs = sunxi_gpadc_mfd_regmap_irq,
+ .num_irqs = ARRAY_SIZE(sunxi_gpadc_mfd_regmap_irq),
+ .num_regs = 1,
+};
+
+static struct mfd_cell sun4i_gpadc_mfd_cells[] = {
+ {
+ .name = "sun4i-a10-gpadc-iio",
+ .resources = adc_resources,
+ .num_resources = ARRAY_SIZE(adc_resources),
+ }, {
+ .name = "iio_hwmon",
+ }
+};
+
+static struct mfd_cell sun5i_gpadc_mfd_cells[] = {
+ {
+ .name = "sun5i-a13-gpadc-iio",
+ .resources = adc_resources,
+ .num_resources = ARRAY_SIZE(adc_resources),
+ }, {
+ .name = "iio_hwmon",
+ },
+};
+
+static struct mfd_cell sun6i_gpadc_mfd_cells[] = {
+ {
+ .name = "sun6i-a31-gpadc-iio",
+ .resources = adc_resources,
+ .num_resources = ARRAY_SIZE(adc_resources),
+ }, {
+ .name = "iio_hwmon",
+ },
+};
+
+static const struct regmap_config sunxi_gpadc_mfd_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .fast_io = true,
+};
+
+static int sunxi_gpadc_mfd_probe(struct platform_device *pdev)
+{
+ struct sunxi_gpadc_mfd_dev *sunxi_gpadc_mfd_dev = NULL;
+ struct resource *mem = NULL;
+ unsigned int irq;
+ int ret;
+
+ sunxi_gpadc_mfd_dev = devm_kzalloc(&pdev->dev,
+ sizeof(*sunxi_gpadc_mfd_dev),
+ GFP_KERNEL);
+ if (!sunxi_gpadc_mfd_dev)
+ return -ENOMEM;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sunxi_gpadc_mfd_dev->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(sunxi_gpadc_mfd_dev->regs))
+ return PTR_ERR(sunxi_gpadc_mfd_dev->regs);
+
+ sunxi_gpadc_mfd_dev->dev = &pdev->dev;
+ dev_set_drvdata(sunxi_gpadc_mfd_dev->dev, sunxi_gpadc_mfd_dev);
+
+ sunxi_gpadc_mfd_dev->regmap =
+ devm_regmap_init_mmio(sunxi_gpadc_mfd_dev->dev,
+ sunxi_gpadc_mfd_dev->regs,
+ &sunxi_gpadc_mfd_regmap_config);
+ if (IS_ERR(sunxi_gpadc_mfd_dev->regmap)) {
+ ret = PTR_ERR(sunxi_gpadc_mfd_dev->regmap);
+ dev_err(&pdev->dev, "failed to init regmap: %d\n", ret);
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ ret = regmap_add_irq_chip(sunxi_gpadc_mfd_dev->regmap, irq,
+ IRQF_ONESHOT, 0,
+ &sunxi_gpadc_mfd_regmap_irq_chip,
+ &sunxi_gpadc_mfd_dev->regmap_irqc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add irq chip: %d\n", ret);
+ return ret;
+ }
+
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "allwinner,sun4i-a10-ts"))
+ ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
+ sun4i_gpadc_mfd_cells,
+ ARRAY_SIZE(sun4i_gpadc_mfd_cells), NULL,
+ 0, NULL);
+ else if (of_device_is_compatible(pdev->dev.of_node,
+ "allwinner,sun5i-a13-ts"))
+ ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
+ sun5i_gpadc_mfd_cells,
+ ARRAY_SIZE(sun5i_gpadc_mfd_cells), NULL,
+ 0, NULL);
+ else if (of_device_is_compatible(pdev->dev.of_node,
+ "allwinner,sun6i-a31-ts"))
+ ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
+ sun6i_gpadc_mfd_cells,
+ ARRAY_SIZE(sun6i_gpadc_mfd_cells), NULL,
+ 0, NULL);
+
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add MFD devices: %d\n", ret);
+ regmap_del_irq_chip(irq, sunxi_gpadc_mfd_dev->regmap_irqc);
+ mfd_remove_devices(&pdev->dev);
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "successfully loaded\n");
+
+ return 0;
+}
+
+static int sunxi_gpadc_mfd_remove(struct platform_device *pdev)
+{
+ struct sunxi_gpadc_mfd_dev *sunxi_gpadc_mfd_dev;
+ unsigned int irq;
+
+ irq = platform_get_irq(pdev, 0);
+ mfd_remove_devices(&pdev->dev);
+ sunxi_gpadc_mfd_dev = dev_get_drvdata(&pdev->dev);
+ regmap_del_irq_chip(irq, sunxi_gpadc_mfd_dev->regmap_irqc);
+
+ return 0;
+}
+
+static const struct of_device_id sunxi_gpadc_mfd_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-ts" },
+ { .compatible = "allwinner,sun5i-a13-ts" },
+ { .compatible = "allwinner,sun6i-a31-ts" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, sunxi_gpadc_mfd_of_match);
+
+static struct platform_driver sunxi_gpadc_mfd_driver = {
+ .driver = {
+ .name = "sunxi-adc-mfd",
+ .of_match_table = of_match_ptr(sunxi_gpadc_mfd_of_match),
+ },
+ .probe = sunxi_gpadc_mfd_probe,
+ .remove = sunxi_gpadc_mfd_remove,
+};
+
+module_platform_driver(sunxi_gpadc_mfd_driver);
+
+MODULE_DESCRIPTION("ADC MFD core driver for sunxi platforms");
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/sunxi-gpadc-mfd.h b/include/linux/mfd/sunxi-gpadc-mfd.h
new file mode 100644
index 0000000..341f8c3
--- /dev/null
+++ b/include/linux/mfd/sunxi-gpadc-mfd.h
@@ -0,0 +1,14 @@
+#ifndef __SUNXI_GPADC_MFD__H__
+#define __SUNXI_GPADC_MFD__H__
+
+#define TP_INT_FIFOC 0x10
+#define TP_INT_FIFOS 0x14
+
+struct sunxi_gpadc_mfd_dev {
+ void __iomem *regs;
+ struct device *dev;
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *regmap_irqc;
+};
+
+#endif
--
2.5.0
next prev parent reply other threads:[~2016-06-28 8:18 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-28 8:45 [PATCH 0/3] " Quentin Schulz
2016-06-28 8:18 ` Quentin Schulz [this message]
2016-06-28 8:30 ` [PATCH 1/3] mfd: " Antoine Tenart
2016-06-28 8:51 ` Antoine Tenart
2016-07-03 11:17 ` Jonathan Cameron
2016-07-03 16:49 ` Lars-Peter Clausen
2016-07-03 17:38 ` Guenter Roeck
2016-06-28 8:18 ` [PATCH 2/3] iio: adc: " Quentin Schulz
2016-06-28 8:32 ` Antoine Tenart
2016-07-03 11:54 ` Jonathan Cameron
2016-07-03 12:48 ` Jonathan Cameron
2016-07-03 15:43 ` Guenter Roeck
2016-07-04 7:26 ` Quentin Schulz
2016-07-04 16:29 ` Guenter Roeck
2016-07-05 7:40 ` Quentin Schulz
2016-06-28 8:18 ` [PATCH 3/3] hwmon: iio_hwmon: defer probe when no channel is found Quentin Schulz
2016-06-30 3:47 ` [3/3] " Guenter Roeck
2016-06-30 13:59 ` Jonathan Cameron
2016-06-30 14:49 ` Lars-Peter Clausen
2016-06-30 14:51 ` Guenter Roeck
2016-07-03 10:47 ` Jonathan Cameron
2016-07-03 15:48 ` Guenter Roeck
2016-06-29 3:28 ` [PATCH 0/3] add support for Allwinner SoCs ADC Chen-Yu Tsai
2016-07-01 9:45 ` Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467101897-15946-2-git-send-email-quentin.schulz@free-electrons.com \
--to=quentin.schulz@free-electrons.com \
--cc=antoine.tenart@free-electrons.com \
--cc=jdelvare@suse.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=maxime.ripard@free-electrons.com \
--cc=pmeerw@pmeerw.net \
--cc=thomas.petazzoni@free-electrons.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®