From: Andi Shyti <andi.shyti@samsung.com>
To: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Andi Shyti <andi.shyti@samsung.com>,
Andi Shyti <andi@etezian.org>
Subject: [PATCH 04/15] lirc_dev: replace printk with pr_* or dev_*
Date: Wed, 29 Jun 2016 22:20:33 +0900 [thread overview]
Message-ID: <1467206444-9935-5-git-send-email-andi.shyti@samsung.com> (raw)
In-Reply-To: <1467206444-9935-1-git-send-email-andi.shyti@samsung.com>
This patch mutes also all the checkpatch warnings related to
printk.
Reword all the printouts so that the string doesn't need to be
split, which fixes the following checkpatch warning:
WARNING: quoted string split across lines
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
drivers/media/rc/lirc_dev.c | 76 +++++++++++++++++++--------------------------
1 file changed, 32 insertions(+), 44 deletions(-)
diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
index ee997ab..b11ab5c 100644
--- a/drivers/media/rc/lirc_dev.c
+++ b/drivers/media/rc/lirc_dev.c
@@ -240,59 +240,51 @@ static int lirc_allocate_driver(struct lirc_driver *d)
int err;
if (!d) {
- printk(KERN_ERR "lirc_dev: lirc_register_driver: "
- "driver pointer must be not NULL!\n");
+ pr_err("lirc_dev: driver pointer must be not NULL!\n");
err = -EBADRQC;
goto out;
}
if (!d->dev) {
- printk(KERN_ERR "%s: dev pointer not filled in!\n", __func__);
+ pr_err("%s: dev pointer not filled in!\n", __func__);
err = -EINVAL;
goto out;
}
if (MAX_IRCTL_DEVICES <= d->minor) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "\"minor\" must be between 0 and %d (%d)!\n",
- MAX_IRCTL_DEVICES - 1, d->minor);
+ dev_err(d->dev, "minor must be between 0 and %d!\n",
+ MAX_IRCTL_DEVICES - 1);
err = -EBADRQC;
goto out;
}
if (1 > d->code_length || (BUFLEN * 8) < d->code_length) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "code length in bits for minor (%d) "
- "must be less than %d!\n",
- d->minor, BUFLEN * 8);
+ dev_err(d->dev, "code length must be less than %d bits\n",
+ BUFLEN * 8);
err = -EBADRQC;
goto out;
}
if (d->sample_rate) {
if (2 > d->sample_rate || HZ < d->sample_rate) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "sample_rate must be between 2 and %d!\n", HZ);
+ dev_err(d->dev, "invalid %d sample rate\n",
+ d->sample_rate);
err = -EBADRQC;
goto out;
}
if (!d->add_to_buf) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "add_to_buf cannot be NULL when "
- "sample_rate is set\n");
+ dev_err(d->dev, "add_to_buf not set\n");
err = -EBADRQC;
goto out;
}
} else if (!(d->fops && d->fops->read) && !d->rbuf) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "fops->read and rbuf cannot all be NULL!\n");
+ dev_err(d->dev, "fops->read and rbuf are NULL!\n");
err = -EBADRQC;
goto out;
} else if (!d->rbuf) {
if (!(d->fops && d->fops->read && d->fops->poll &&
d->fops->unlocked_ioctl)) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "neither read, poll nor unlocked_ioctl can be NULL!\n");
+ dev_err(d->dev, "undefined read, poll, ioctl\n");
err = -EBADRQC;
goto out;
}
@@ -308,14 +300,12 @@ static int lirc_allocate_driver(struct lirc_driver *d)
if (!irctls[minor])
break;
if (MAX_IRCTL_DEVICES == minor) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "no free slots for drivers!\n");
+ dev_err(d->dev, "no free slots for drivers!\n");
err = -ENOMEM;
goto out_lock;
}
} else if (irctls[minor]) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "minor (%d) just registered!\n", minor);
+ dev_err(d->dev, "minor (%d) just registered!\n", minor);
err = -EBUSY;
goto out_lock;
}
@@ -352,9 +342,8 @@ static int lirc_allocate_driver(struct lirc_driver *d)
/* try to fire up polling thread */
ir->task = kthread_run(lirc_thread, (void *)ir, "lirc_dev");
if (IS_ERR(ir->task)) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "cannot run poll thread for minor = %d\n",
- d->minor);
+ dev_err(d->dev, "cannot run thread for minor = %d\n",
+ d->minor);
err = -ECHILD;
goto out_sysfs;
}
@@ -407,15 +396,14 @@ int lirc_unregister_driver(int minor)
struct cdev *cdev;
if (minor < 0 || minor >= MAX_IRCTL_DEVICES) {
- printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between "
- "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES - 1);
+ pr_err("lirc_dev: %s: minor (%d) must be between 0 and %d!\n",
+ __func__, minor, MAX_IRCTL_DEVICES - 1);
return -EBADRQC;
}
ir = irctls[minor];
if (!ir) {
- printk(KERN_ERR "lirc_dev: %s: failed to get irctl struct "
- "for minor %d!\n", __func__, minor);
+ pr_err("lirc_dev: %s: failed to get irctl\n", __func__);
return -ENOENT;
}
@@ -424,8 +412,8 @@ int lirc_unregister_driver(int minor)
mutex_lock(&lirc_dev_lock);
if (ir->d.minor != minor) {
- printk(KERN_ERR "lirc_dev: %s: minor (%d) device not "
- "registered!\n", __func__, minor);
+ dev_err(ir->d.dev, "lirc_dev: minor %d device not registered\n",
+ minor);
mutex_unlock(&lirc_dev_lock);
return -ENOENT;
}
@@ -467,7 +455,7 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file)
int retval = 0;
if (iminor(inode) >= MAX_IRCTL_DEVICES) {
- printk(KERN_WARNING "lirc_dev [%d]: open result = -ENODEV\n",
+ pr_err("lirc_dev [%d]: open result = -ENODEV\n",
iminor(inode));
return -ENODEV;
}
@@ -530,7 +518,7 @@ int lirc_dev_fop_close(struct inode *inode, struct file *file)
int ret;
if (!ir) {
- printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+ pr_err("%s: called with invalid irctl\n", __func__);
return -EINVAL;
}
@@ -566,7 +554,7 @@ unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait)
unsigned int ret;
if (!ir) {
- printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+ pr_err("%s: called with invalid irctl\n", __func__);
return POLLERR;
}
@@ -597,7 +585,7 @@ long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
struct irctl *ir = irctls[iminor(file_inode(file))];
if (!ir) {
- printk(KERN_ERR "lirc_dev: %s: no irctl found!\n", __func__);
+ pr_err("lirc_dev: %s: no irctl found!\n", __func__);
return -ENODEV;
}
@@ -605,7 +593,7 @@ long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
ir->d.name, ir->d.minor, cmd);
if (ir->d.minor == NOPLUG || !ir->attached) {
- dev_dbg(ir->d.dev, LOGHEAD "ioctl result = -ENODEV\n",
+ dev_err(ir->d.dev, LOGHEAD "ioctl result = -ENODEV\n",
ir->d.name, ir->d.minor);
return -ENODEV;
}
@@ -682,7 +670,7 @@ ssize_t lirc_dev_fop_read(struct file *file,
DECLARE_WAITQUEUE(wait, current);
if (!ir) {
- printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+ pr_err("%s: called with invalid irctl\n", __func__);
return -ENODEV;
}
@@ -787,7 +775,7 @@ ssize_t lirc_dev_fop_write(struct file *file, const char __user *buffer,
struct irctl *ir = irctls[iminor(file_inode(file))];
if (!ir) {
- printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+ pr_err("%s: called with invalid irctl\n", __func__);
return -ENODEV;
}
@@ -806,7 +794,7 @@ static int __init lirc_dev_init(void)
lirc_class = class_create(THIS_MODULE, "lirc");
if (IS_ERR(lirc_class)) {
retval = PTR_ERR(lirc_class);
- printk(KERN_ERR "lirc_dev: class_create failed\n");
+ pr_err("lirc_dev: class_create failed\n");
goto error;
}
@@ -814,13 +802,13 @@ static int __init lirc_dev_init(void)
IRCTL_DEV_NAME);
if (retval) {
class_destroy(lirc_class);
- printk(KERN_ERR "lirc_dev: alloc_chrdev_region failed\n");
+ pr_err("lirc_dev: alloc_chrdev_region failed\n");
goto error;
}
- printk(KERN_INFO "lirc_dev: IR Remote Control driver registered, "
- "major %d \n", MAJOR(lirc_base_dev));
+ pr_info("lirc_dev: IR Remote Control driver registered, major %d\n",
+ MAJOR(lirc_base_dev));
error:
return retval;
@@ -832,7 +820,7 @@ static void __exit lirc_dev_exit(void)
{
class_destroy(lirc_class);
unregister_chrdev_region(lirc_base_dev, MAX_IRCTL_DEVICES);
- printk(KERN_INFO "lirc_dev: module unloaded\n");
+ pr_info("lirc_dev: module unloaded\n");
}
module_init(lirc_dev_init);
--
2.8.1
next prev parent reply other threads:[~2016-06-29 13:24 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-29 13:20 [PATCH 00/15] lirc_dev fixes and beautification Andi Shyti
2016-06-29 13:20 ` [PATCH 01/15] lirc_dev: place buffer allocation on separate function Andi Shyti
2016-06-29 13:20 ` [PATCH 02/15] lirc_dev: allow bufferless driver registration Andi Shyti
2016-06-29 13:20 ` [PATCH 03/15] lirc_dev: remove unnecessary debug prints Andi Shyti
2016-06-29 13:20 ` Andi Shyti [this message]
2016-06-30 0:27 ` [PATCH 04/15] lirc_dev: replace printk with pr_* or dev_* Joe Perches
2016-06-29 13:20 ` [PATCH 05/15] lirc_dev: simplify goto paths Andi Shyti
2016-06-29 13:20 ` [PATCH 06/15] lirc_dev: do not use goto to create loops Andi Shyti
2016-06-29 13:20 ` [PATCH 07/15] lirc_dev: simplify if statement in lirc_add_to_buf Andi Shyti
2016-06-29 13:20 ` [PATCH 08/15] lirc_dev: remove double if ... else statement Andi Shyti
2016-06-29 13:20 ` [PATCH 09/15] lirc_dev: merge three if statements in only one Andi Shyti
2016-06-29 13:20 ` [PATCH 10/15] lirc_dev: remove CONFIG_COMPAT precompiler check Andi Shyti
2016-06-29 13:20 ` [PATCH 11/15] lirc_dev: fix variable constant comparisons Andi Shyti
2016-06-29 13:20 ` [PATCH 12/15] lirc_dev: fix error return value Andi Shyti
2016-06-29 13:20 ` [PATCH 13/15] lirc_dev: extremely trivial comment style fix Andi Shyti
2016-06-29 13:20 ` [PATCH 14/15] lirc_dev: fix potential segfault Andi Shyti
2016-06-29 13:20 ` [PATCH 15/15] include: lirc: add set length and frequency ioctl options Andi Shyti
2016-06-29 22:46 ` Sean Young
2016-06-29 23:35 ` Andi Shyti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467206444-9935-5-git-send-email-andi.shyti@samsung.com \
--to=andi.shyti@samsung.com \
--cc=andi@etezian.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@osg.samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®