mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Venkat Reddy Talla <vreddytalla@nvidia.com>
To: <myungjoo.ham@samsung.com>, <cw00.choi@samsung.com>,
	<linux-kernel@vger.kernel.org>
Cc: <ldewangan@nvidia.com>, <vreddytalla@nvidia.com>
Subject: [PATCH] extcon: adc-jack: add suspend/resume support
Date: Thu, 30 Jun 2016 14:24:00 +0530	[thread overview]
Message-ID: <1467276840-29808-1-git-send-email-vreddytalla@nvidia.com> (raw)

adding suspend and resume funtionality for extcon-adc-jack
driver to configure system wake up for extcon events,
also adding support to enable/disable system wakeup
through flag wakeup_source based on platform requirement.

Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
---
 drivers/extcon/extcon-adc-jack.c       | 34 ++++++++++++++++++++++++++++++++++
 include/linux/extcon/extcon-adc-jack.h |  2 ++
 2 files changed, 36 insertions(+)

diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index 7fc0ae1..44e48aa 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -38,6 +38,7 @@
  * @chan:		iio channel being queried.
  */
 struct adc_jack_data {
+	struct device *dev;
 	struct extcon_dev *edev;
 
 	const unsigned int **cable_names;
@@ -49,6 +50,7 @@ struct adc_jack_data {
 	struct delayed_work handler;
 
 	struct iio_channel *chan;
+	bool wakeup_source;
 };
 
 static void adc_jack_handler(struct work_struct *work)
@@ -105,6 +107,7 @@ static int adc_jack_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	data->dev = &pdev->dev;
 	data->edev = devm_extcon_dev_allocate(&pdev->dev, pdata->cable_names);
 	if (IS_ERR(data->edev)) {
 		dev_err(&pdev->dev, "failed to allocate extcon device\n");
@@ -128,6 +131,7 @@ static int adc_jack_probe(struct platform_device *pdev)
 		return PTR_ERR(data->chan);
 
 	data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms);
+	data->wakeup_source = pdata->wakeup_source;
 
 	INIT_DEFERRABLE_WORK(&data->handler, adc_jack_handler);
 
@@ -151,6 +155,9 @@ static int adc_jack_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	if (data->wakeup_source)
+		device_init_wakeup(&pdev->dev, 1);
+
 	return 0;
 }
 
@@ -165,11 +172,38 @@ static int adc_jack_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int adc_jack_suspend(struct device *dev)
+{
+	struct adc_jack_data *data = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&data->handler);
+	if (device_may_wakeup(data->dev))
+		enable_irq_wake(data->irq);
+
+	return 0;
+}
+
+static int adc_jack_resume(struct device *dev)
+{
+	struct adc_jack_data *data = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(data->dev))
+		disable_irq_wake(data->irq);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(adc_jack_pm_ops,
+		adc_jack_suspend, adc_jack_resume);
+
 static struct platform_driver adc_jack_driver = {
 	.probe          = adc_jack_probe,
 	.remove         = adc_jack_remove,
 	.driver         = {
 		.name   = "adc-jack",
+		.pm = &adc_jack_pm_ops,
 	},
 };
 
diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
index 53c6080..ac85f20 100644
--- a/include/linux/extcon/extcon-adc-jack.h
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -53,6 +53,7 @@ struct adc_jack_cond {
  *			milli-seconds after the interrupt occurs. You may
  *			describe such delays with @handling_delay_ms, which
  *			is rounded-off by jiffies.
+ * @wakeup_source:	flag to wake up the system for extcon events.
  */
 struct adc_jack_pdata {
 	const char *name;
@@ -65,6 +66,7 @@ struct adc_jack_pdata {
 
 	unsigned long irq_flags;
 	unsigned long handling_delay_ms; /* in ms */
+	bool wakeup_source;
 };
 
 #endif /* _EXTCON_ADC_JACK_H */
-- 
2.1.4

             reply	other threads:[~2016-06-30  8:55 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-30  8:54 Venkat Reddy Talla [this message]
2016-07-02  5:42 ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467276840-29808-1-git-send-email-vreddytalla@nvidia.com \
    --to=vreddytalla@nvidia.com \
    --cc=cw00.choi@samsung.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®