From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030341AbcGKIoX (ORCPT ); Mon, 11 Jul 2016 04:44:23 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:54775 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751743AbcGKIoV (ORCPT ); Mon, 11 Jul 2016 04:44:21 -0400 From: Alexandre TORGUE To: Linus Walleij , Maxime Coquelin , Patrice Chotard , Paul Gortmaker , Rob Herring CC: , , , Subject: [PATCH v3]Add STM32F746 MCU pinctrl support Date: Mon, 11 Jul 2016 10:43:39 +0200 Message-ID: <1468226620-574-1-git-send-email-alexandre.torgue@st.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2016-07-11_04:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This series adds STM32F746 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Changes since v2: According to Linus remark, use builtin_platform_driver() instead of device_initcall() as there are nothing to do in driver init function (except to register driver). As soon this patch will be accepted, I will send the same update for stm32f429 pinctrl. Changes since v1: Thanks to Paul Gortmaker remarks, remove all modular API as this driver is only built-in one. Regards Alex Alexandre TORGUE (1): pinctrl: Add STM32F746 MCU support drivers/pinctrl/stm32/Kconfig | 6 + drivers/pinctrl/stm32/Makefile | 2 + drivers/pinctrl/stm32/pinctrl-stm32f746.c | 1681 +++++++++++++++++++++++++++++ 3 files changed, 1689 insertions(+) create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32f746.c -- 1.9.1