mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
To: <joro@8bytes.org>, <pbonzini@redhat.com>, <rkrcmar@redhat.com>,
	<alex.williamson@redhat.com>
Cc: <kvm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<sherry.hurwitz@amd.com>,
	Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Subject: [PART2 PATCH v3 09/11] iommu/amd: Enable vAPIC interrupt remapping mode by default
Date: Mon, 11 Jul 2016 05:11:37 -0500	[thread overview]
Message-ID: <1468231899-6987-10-git-send-email-suravee.suthikulpanit@amd.com> (raw)
In-Reply-To: <1468231899-6987-1-git-send-email-suravee.suthikulpanit@amd.com>

From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>

Introduce struct iommu_dev_data.use_vapic flag, which IOMMU driver
uses to determine if it should enable vAPIC support, by setting
the ga_mode bit in the device's interrupt remapping table entry.

Currently, it is enabled for all pass-through device if vAPIC mode
is enabled.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 drivers/iommu/amd_iommu.c       | 44 +++++++++++++++++++++++++++++++++--------
 drivers/iommu/amd_iommu_init.c  | 12 ++++++++++-
 drivers/iommu/amd_iommu_types.h |  2 +-
 3 files changed, 48 insertions(+), 10 deletions(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 4abced5..a0afc7d 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -105,6 +105,7 @@ struct iommu_dev_data {
 	bool pri_tlp;			  /* PASID TLB required for
 					     PPR completions */
 	u32 errata;			  /* Bitmap for errata to apply */
+	u32 use_vapic;			  /* Enable device to use vapic mode */
 };
 
 /*
@@ -3238,6 +3239,12 @@ static void amd_iommu_detach_device(struct iommu_domain *dom,
 	if (!iommu)
 		return;
 
+#ifdef CONFIG_IRQ_REMAP
+	if (AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir) &&
+	    (dom->type == IOMMU_DOMAIN_UNMANAGED))
+		dev_data->use_vapic = 0;
+#endif
+
 	iommu_completion_wait(iommu);
 }
 
@@ -3263,6 +3270,15 @@ static int amd_iommu_attach_device(struct iommu_domain *dom,
 
 	ret = attach_device(dev, domain);
 
+#ifdef CONFIG_IRQ_REMAP
+	if (AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir)) {
+		if (dom->type == IOMMU_DOMAIN_UNMANAGED)
+			dev_data->use_vapic = 1;
+		else
+			dev_data->use_vapic = 0;
+	}
+#endif
+
 	iommu_completion_wait(iommu);
 
 	return ret;
@@ -4013,7 +4029,7 @@ static void free_irte(u16 devid, int index)
 
 static void irte_prepare(void *entry,
 			 u32 delivery_mode, u32 dest_mode,
-			 u8 vector, u32 dest_apicid)
+			 u8 vector, u32 dest_apicid, int devid)
 {
 	union irte *irte = (union irte *) entry;
 
@@ -4027,13 +4043,14 @@ static void irte_prepare(void *entry,
 
 static void irte_ga_prepare(void *entry,
 			    u32 delivery_mode, u32 dest_mode,
-			    u8 vector, u32 dest_apicid)
+			    u8 vector, u32 dest_apicid, int devid)
 {
 	struct irte_ga *irte = (struct irte_ga *) entry;
+	struct iommu_dev_data *dev_data = search_dev_data(devid);
 
 	irte->lo.val                      = 0;
 	irte->hi.val                      = 0;
-	irte->lo.fields_remap.guest_mode  = 0;
+	irte->lo.fields_remap.guest_mode  = dev_data ? dev_data->use_vapic : 0;
 	irte->lo.fields_remap.int_type    = delivery_mode;
 	irte->lo.fields_remap.dm          = dest_mode;
 	irte->hi.fields.vector            = vector;
@@ -4087,11 +4104,14 @@ static void irte_ga_set_affinity(void *entry, u16 devid, u16 index,
 				 u8 vector, u32 dest_apicid)
 {
 	struct irte_ga *irte = (struct irte_ga *) entry;
+	struct iommu_dev_data *dev_data = search_dev_data(devid);
 
-	irte->hi.fields.vector = vector;
-	irte->lo.fields_remap.destination = dest_apicid;
-	irte->lo.fields_remap.guest_mode = 0;
-	modify_irte_ga(devid, index, irte, NULL);
+	if (!dev_data || !dev_data->use_vapic) {
+		irte->hi.fields.vector = vector;
+		irte->lo.fields_remap.destination = dest_apicid;
+		irte->lo.fields_remap.guest_mode = 0;
+		modify_irte_ga(devid, index, irte, NULL);
+	}
 }
 
 #define IRTE_ALLOCATED (~1U)
@@ -4234,7 +4254,7 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
 	data->irq_2_irte.index = index + sub_handle;
 	iommu->irte_ops->prepare(data->entry, apic->irq_delivery_mode,
 				 apic->irq_dest_mode, irq_cfg->vector,
-				 irq_cfg->dest_apicid);
+				 irq_cfg->dest_apicid, devid);
 
 	switch (info->type) {
 	case X86_IRQ_ALLOC_TYPE_IOAPIC:
@@ -4435,6 +4455,14 @@ static int amd_ir_set_vcpu_affinity(struct irq_data *data, void *vcpu_info)
 	struct amd_ir_data *ir_data = data->chip_data;
 	struct irte_ga *irte = (struct irte_ga *) ir_data->entry;
 	struct irq_2_irte *irte_info = &ir_data->irq_2_irte;
+	struct iommu_dev_data *dev_data = search_dev_data(irte_info->devid);
+
+	/* Note:
+	 * This device has never been set up for guest mode.
+	 * we should not modify the IRTE
+	 */
+	if (!dev_data || !dev_data->use_vapic)
+		return 0;
 
 	/* Note:
 	 * SVM tries to set up for VAPIC mode, but we are in
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index d103c3f..f4722a0 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -146,7 +146,7 @@ struct ivmd_header {
 bool amd_iommu_dump;
 bool amd_iommu_irq_remap __read_mostly;
 
-int amd_iommu_guest_ir;
+int amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_VAPIC;
 
 static bool amd_iommu_detected;
 static bool __initdata amd_iommu_disabled;
@@ -2014,6 +2014,11 @@ static void early_enable_iommus(void)
 		iommu_enable(iommu);
 		iommu_flush_all_caches(iommu);
 	}
+
+#ifdef CONFIG_IRQ_REMAP
+	if (AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir))
+		amd_iommu_irq_ops.capability |= (1 << IRQ_POSTING_CAP);
+#endif
 }
 
 static void enable_iommus_v2(void)
@@ -2039,6 +2044,11 @@ static void disable_iommus(void)
 
 	for_each_iommu(iommu)
 		iommu_disable(iommu);
+
+#ifdef CONFIG_IRQ_REMAP
+	if (AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir))
+		amd_iommu_irq_ops.capability &= ~(1 << IRQ_POSTING_CAP);
+#endif
 }
 
 /*
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index 81c5def..97b706d 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -821,7 +821,7 @@ struct irq_2_irte {
 };
 
 struct amd_irte_ops {
-	void (*prepare)(void *, u32, u32, u8, u32);
+	void (*prepare)(void *, u32, u32, u8, u32, int);
 	void (*activate)(void *, u16, u16);
 	void (*deactivate)(void *, u16, u16);
 	void (*set_affinity)(void *, u16, u16, u8, u32);
-- 
1.9.1

  parent reply	other threads:[~2016-07-11 10:47 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-11 10:11 [PART2 PATCH v3 00/11] iommu/AMD: Introduce IOMMU AVIC support Suravee Suthikulpanit
2016-07-11 10:11 ` [PART2 PATCH v3 01/11] iommu/amd: Detect and enable guest vAPIC support Suravee Suthikulpanit
2016-07-11 10:11 ` [PART2 PATCH v3 02/11] iommu/amd: Move and introduce new IRTE-related unions and structures Suravee Suthikulpanit
2016-07-11 10:11 ` [PART2 PATCH v3 03/11] iommu/amd: Introduce interrupt remapping ops structure Suravee Suthikulpanit
2016-07-11 10:11 ` [PART2 PATCH v3 04/11] iommu/amd: Add support for multiple IRTE formats Suravee Suthikulpanit
2016-07-11 10:11 ` [PART2 PATCH v3 05/11] iommu/amd: Detect and initialize guest vAPIC log Suravee Suthikulpanit
2016-07-11 10:11 ` [PART2 PATCH v3 06/11] iommu/amd: Adding GALOG interrupt handler Suravee Suthikulpanit
2016-07-11 18:47   ` Radim Krčmář
2016-07-13 12:49     ` Suravee Suthikulpanit
2016-07-11 10:11 ` [PART2 PATCH v3 07/11] iommu/amd: Introduce amd_iommu_update_ga() Suravee Suthikulpanit
2016-07-11 18:59   ` Radim Krčmář
2016-07-13  8:49     ` Suravee Suthikulpanit
2016-07-11 10:11 ` [PART2 PATCH v3 08/11] iommu/amd: Implements irq_set_vcpu_affinity() hook to setup vapic mode for pass-through devices Suravee Suthikulpanit
2016-07-11 10:11 ` Suravee Suthikulpanit [this message]
2016-07-11 10:11 ` [PART2 PATCH v3 10/11] svm: Introduce AMD IOMMU avic_ga_log_notifier Suravee Suthikulpanit
2016-07-11 19:09   ` Radim Krčmář
2016-07-13  8:53     ` Suravee Suthikulpanit
2016-07-11 10:11 ` [PART2 PATCH v3 11/11] svm: Implements update_pi_irte hook to setup posted interrupt Suravee Suthikulpanit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468231899-6987-10-git-send-email-suravee.suthikulpanit@amd.com \
    --to=suravee.suthikulpanit@amd.com \
    --cc=alex.williamson@redhat.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    --cc=sherry.hurwitz@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®