From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
To: Jiri Kosina <jikos@kernel.org>, Ping Cheng <pinglinux@gmail.com>,
Jason Gerecke <killertofu@gmail.com>,
Aaron Skomra <skomra@gmail.com>,
Peter Hutterer <peter.hutterer@who-t.net>
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: [PATCH v2 06/30] HID: wacom: switch battery to devres
Date: Wed, 13 Jul 2016 18:05:53 +0200 [thread overview]
Message-ID: <1468425977-4819-7-git-send-email-benjamin.tissoires@redhat.com> (raw)
In-Reply-To: <1468425977-4819-1-git-send-email-benjamin.tissoires@redhat.com>
Simplifying the error code paths.
We need to keep wacom_destroy_battery() around for now as the wireless
module and the remotes are using it to dynamically remove the battery
supply on disconnect.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
No changes in v2
---
drivers/hid/wacom_sys.c | 38 ++++++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 54f0260..61dcb87e 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -1082,11 +1082,16 @@ static int wacom_ac_get_property(struct power_supply *psy,
static int wacom_initialize_battery(struct wacom *wacom)
{
static atomic_t battery_no = ATOMIC_INIT(0);
+ struct device *dev = &wacom->hdev->dev;
struct power_supply_config psy_cfg = { .drv_data = wacom, };
+ struct power_supply_desc *bat_desc = &wacom->battery_desc;
unsigned long n;
+ int error;
+
+ if (!devres_open_group(dev, bat_desc, GFP_KERNEL))
+ return -ENOMEM;
if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) {
- struct power_supply_desc *bat_desc = &wacom->battery_desc;
struct power_supply_desc *ac_desc = &wacom->ac_desc;
n = atomic_inc_return(&battery_no) - 1;
@@ -1106,33 +1111,40 @@ static int wacom_initialize_battery(struct wacom *wacom)
ac_desc->type = POWER_SUPPLY_TYPE_MAINS;
ac_desc->use_for_apm = 0;
- wacom->battery = power_supply_register(&wacom->hdev->dev,
- &wacom->battery_desc, &psy_cfg);
- if (IS_ERR(wacom->battery))
- return PTR_ERR(wacom->battery);
+ wacom->battery = devm_power_supply_register(dev,
+ &wacom->battery_desc,
+ &psy_cfg);
+ if (IS_ERR(wacom->battery)) {
+ error = PTR_ERR(wacom->battery);
+ goto err;
+ }
power_supply_powers(wacom->battery, &wacom->hdev->dev);
- wacom->ac = power_supply_register(&wacom->hdev->dev,
- &wacom->ac_desc,
- &psy_cfg);
+ wacom->ac = devm_power_supply_register(dev,
+ &wacom->ac_desc,
+ &psy_cfg);
if (IS_ERR(wacom->ac)) {
- power_supply_unregister(wacom->battery);
- return PTR_ERR(wacom->ac);
+ error = PTR_ERR(wacom->ac);
+ goto err;
}
power_supply_powers(wacom->ac, &wacom->hdev->dev);
}
+ devres_close_group(dev, bat_desc);
return 0;
+
+err:
+ devres_release_group(dev, bat_desc);
+ return error;
}
static void wacom_destroy_battery(struct wacom *wacom)
{
if (wacom->battery) {
- power_supply_unregister(wacom->battery);
+ devres_release_group(&wacom->hdev->dev, &wacom->battery_desc);
wacom->battery = NULL;
- power_supply_unregister(wacom->ac);
wacom->ac = NULL;
}
}
@@ -1731,7 +1743,6 @@ fail_remote:
fail_leds:
wacom_clean_inputs(wacom);
fail_register_inputs:
- wacom_destroy_battery(wacom);
fail_battery:
wacom_remove_shared_data(wacom);
fail_shared_data:
@@ -1920,7 +1931,6 @@ static void wacom_remove(struct hid_device *hdev)
wacom_clean_inputs(wacom);
if (hdev->bus == BUS_BLUETOOTH)
device_remove_file(&hdev->dev, &dev_attr_speed);
- wacom_destroy_battery(wacom);
wacom_remove_shared_data(wacom);
hid_set_drvdata(hdev, NULL);
--
2.5.5
next prev parent reply other threads:[~2016-07-13 16:14 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-13 16:05 [PATCH v2 00/30] HID: wacom: cleanup/EKR/LED Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 01/30] HID: wacom: actually report the battery level for wireless connected Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 02/30] HID: wacom: store the type in wacom->shared for INTUOSHT and INTUOSHT2 Benjamin Tissoires
2016-07-15 4:14 ` Ping Cheng
2016-07-18 14:54 ` Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 03/30] HID: wacom: remove cleanup of wacom->remote_dir from wacom_clean_inputs() Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 04/30] HID: wacom: untie leds from inputs Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 05/30] HID: wacom: use one work queue per task Benjamin Tissoires
2016-07-13 16:05 ` Benjamin Tissoires [this message]
2016-07-13 16:05 ` [PATCH v2 07/30] HID: wacom: switch inputs to devres Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 08/30] HID: wacom: put the managed resources in a group Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 09/30] HID: wacom: convert LEDs to devres Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 10/30] HID: wacom: use devm_kasprintf for allocating the name of the remote Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 11/30] HID: wacom: use devres to allocate driver data Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 12/30] HID: wacom: devres manage the shared data too Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 13/30] HID: wacom: leds: dynamically allocate LED groups Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 14/30] HID: wacom: EKR: add a worker to add/remove resources on addition/removal Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 15/30] HID: wacom: EKR: have the wacom resources dynamically allocated Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 16/30] HID: wacom: rework fail path in probe() and parse_and_register() Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 17/30] HID: wacom: EKR: have proper allocator and destructor Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 18/30] HID: wacom: EKR: use devres groups to manage resources Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 19/30] HID: wacom: EKR: have one array of struct remotes instead of many arrays Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 20/30] HID: wacom: EKR: allocate one input node per remote Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 21/30] HID: wacom: EKR: have one power_supply " Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 22/30] HID: wacom: EKR: attach the power_supply on first connection Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 23/30] HID: wacom: leds: use the ledclass instead of custom made sysfs files Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 24/30] HID: wacom: leds: actually release the LEDs on disconnect Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 25/30] HID: wacom: leds: handle the switch of the LEDs directly in the kernel Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 26/30] HID: wacom: leds: make sure Cintiq 21UX2 and 24HD control the right LEDs Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 27/30] HID: wacom: leds: handle Cintiq 24HD leds buttons Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 28/30] HID: wacom: power_supply: mark the type as USB Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 29/30] HID: wacom: power_supply: remove ac information Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 30/30] HID: wacom: power_supply: provide the actual model_name Benjamin Tissoires
2016-07-13 21:36 ` [PATCH v2 00/30] HID: wacom: cleanup/EKR/LED Aaron Armstrong Skomra
2016-08-01 23:17 ` Ping Cheng
2016-08-02 8:48 ` Jiri Kosina
2016-08-05 11:41 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468425977-4819-7-git-send-email-benjamin.tissoires@redhat.com \
--to=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=killertofu@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.hutterer@who-t.net \
--cc=pinglinux@gmail.com \
--cc=skomra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®