From: Shawn Lin <shawn.lin@rock-chips.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
Doug Anderson <dianders@chromium.org>,
linux-rockchip@lists.infradead.org,
Shawn Lin <shawn.lin@rock-chips.com>
Subject: [PATCH v2 2/2] mmc: core: fall back host->f_init if failing to init mmc card after resume
Date: Wed, 20 Jul 2016 09:57:40 +0800 [thread overview]
Message-ID: <1468979860-28712-2-git-send-email-shawn.lin@rock-chips.com> (raw)
In-Reply-To: <1468979860-28712-1-git-send-email-shawn.lin@rock-chips.com>
We observed the failure of initializing card after resume
accidentally. It's hard to reproduce but we did get report from
the suspend/resume test of our RK3399 mp test farm . Unfortunately,
we still fail to figure out what was going wrong at that time.
Also we can't achieve it by retrying the host->f_init without falling
back it. But this patch will solve the problem as we could add some log
there and see that we resume the mmc card successfully after falling
back the host->f_init. There is no obvious side effect found, so it seems
this patch will improve the stability.
[ 93.405085] mmc1: unexpected status 0x800900 after switch
[ 93.408474] mmc1: switch to bus width 1 failed
[ 93.408482] mmc1: mmc_select_hs200 failed, error -110
[ 93.408492] mmc1: error -110 during resume (card was removed?)
[ 93.408705] PM: resume of devices complete after 213.453 msecs
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---
Changes in v2:
- remove mmc_power_off
- take f_min into consideration
drivers/mmc/core/mmc.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 403b97b..a2891c1 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1945,6 +1945,7 @@ static int mmc_suspend(struct mmc_host *host)
static int _mmc_resume(struct mmc_host *host)
{
int err = 0;
+ int i;
BUG_ON(!host);
BUG_ON(!host->card);
@@ -1954,8 +1955,22 @@ static int _mmc_resume(struct mmc_host *host)
if (!mmc_card_suspended(host->card))
goto out;
- mmc_power_up(host, host->card->ocr);
- err = mmc_init_card(host, host->card->ocr, host->card);
+ /*
+ * Let's try to fallback the host->f_init
+ * if failing to init mmc card after resume.
+ */
+ for (i = 0; i < ARRAY_SIZE(freqs); i++) {
+ if (host->f_init < max(freqs[i], host->f_min))
+ continue;
+ else
+ host->f_init = max(freqs[i], host->f_min);
+
+ mmc_power_up(host, host->card->ocr);
+ err = mmc_init_card(host, host->card->ocr, host->card);
+ if (!err)
+ break;
+ }
+
mmc_card_clr_suspended(host->card);
out:
--
2.3.7
next prev parent reply other threads:[~2016-07-20 2:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-20 1:57 [PATCH v2 1/2] mmc: core: move freqs table into core.h Shawn Lin
2016-07-20 1:57 ` Shawn Lin [this message]
[not found] ` <CGME20160802093847epcas1p2c8cb3881913a608122bb77dd9d973e63@epcas1p2.samsung.com>
[not found] ` <98cd6af4-3296-9020-aeae-802f797f0631@rock-chips.com>
2016-08-02 10:47 ` [PATCH v2 2/2] mmc: core: fall back host->f_init if failing to init mmc card after resume Jaehoon Chung
2016-08-03 1:35 ` Shawn Lin
2016-08-03 6:54 ` Jaehoon Chung
2016-08-03 7:44 ` Shawn Lin
2016-08-20 3:02 ` Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468979860-28712-2-git-send-email-shawn.lin@rock-chips.com \
--to=shawn.lin@rock-chips.com \
--cc=adrian.hunter@intel.com \
--cc=dianders@chromium.org \
--cc=jh80.chung@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®