mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: LABBE Corentin <clabbe.montjoie@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
	maxime.ripard@free-electrons.com, wens@csie.org,
	linux@armlinux.org.uk, davem@davemloft.net
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	LABBE Corentin <clabbe.montjoie@gmail.com>
Subject: [PATCH v2 3/5] ARM: sun8i: dt: Add DT bindings documentation for Allwinner sun8i-emac
Date: Wed, 20 Jul 2016 10:03:18 +0200	[thread overview]
Message-ID: <1469001800-11615-4-git-send-email-clabbe.montjoie@gmail.com> (raw)
In-Reply-To: <1469001800-11615-1-git-send-email-clabbe.montjoie@gmail.com>

This patch adds documentation for Device-Tree bindings for the
Allwinner sun8i-emac driver.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
---
 .../bindings/net/allwinner,sun8i-emac.txt          | 65 ++++++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt

diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt
new file mode 100644
index 0000000..4bf4e53
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt
@@ -0,0 +1,65 @@
+* Allwinner sun8i EMAC ethernet controller
+
+Required properties:
+- compatible: "allwinner,sun8i-a83t-emac", "allwinner,sun8i-h3-emac",
+		or "allwinner,sun50i-a64-emac"
+- reg: address and length of the register sets for the device.
+- reg-names: should be "emac" and "syscon", matching the register sets
+- interrupts: interrupt for the device
+- clocks: A phandle to the reference clock for this device
+- clock-names: should be "ahb"
+- resets: A phandle to the reset control for this device
+- reset-names: should be "ahb"
+- phy-mode: See ethernet.txt
+- phy or phy-handle: See ethernet.txt
+- #address-cells: shall be 1
+- #size-cells: shall be 0
+
+"allwinner,sun8i-h3-emac" also requires:
+- clocks: an extra phandle to the reference clock for the EPHY
+- clock-names: an extra "ephy" entry matching the clocks property
+- resets: an extra phandle to the reset control for the EPHY
+- resets-names: an extra "ephy" entry matching the resets property
+
+See ethernet.txt in the same directory for generic bindings for ethernet
+controllers.
+
+The device node referenced by "phy" or "phy-handle" should be a child node
+of this node. See phy.txt for the generic PHY bindings.
+
+Optional properties:
+- phy-supply: phandle to a regulator if the PHY needs one
+- phy-io-supply: phandle to a regulator if the PHY needs a another one for I/O.
+		 This is sometimes found with RGMII PHYs, which use a second
+		 regulator for the lower I/O voltage.
+- allwinner,tx-delay: The setting of the TX clock delay chain
+- allwinner,rx-delay: The setting of the RX clock delay chain
+
+The TX/RX clock delay chain settings are board specific.
+
+Optional properties for "allwinner,sun8i-h3-emac":
+- allwinner,use-internal-phy: Use the H3 SoC's internal E(thernet) PHY
+- allwinner,leds-active-low: EPHY LEDs are active low
+
+When the internal PHY is requested, the implementation shall configure the
+internal PHY to use the address specified in the child PHY node.
+
+Example:
+
+emac: ethernet@01c0b000 {
+	compatible = "allwinner,sun8i-h3-emac";
+	reg = <0x01c0b000 0x104>, <0x01c00030 0x4>;
+	reg-names = "emac", "syscon";
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&bus_gates 17>, <&bus_gates 128>;
+	clock-names = "ahb", "ephy";
+	resets = <&ahb_rst 17>, <&ahb_rst 66>;
+	reset-names = "ahb", "ephy";
+	phy = <&phy1>;
+	allwinner,use-internal-phy;
+	allwinner,leds-active-low;
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
-- 
2.7.3

  parent reply	other threads:[~2016-07-20  8:05 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-20  8:03 [PATCH v2 0/5] net-next: ethernet: add sun8i-emac driver LABBE Corentin
2016-07-20  8:03 ` [PATCH v2 1/5] " LABBE Corentin
2016-07-20  9:56   ` Arnd Bergmann
2016-07-28 13:18     ` LABBE Corentin
2016-07-29  9:26       ` Arnd Bergmann
2016-07-25 19:54   ` Maxime Ripard
2016-07-28 14:57     ` LABBE Corentin
2016-07-29 17:25       ` Maxime Ripard
2016-07-30  1:30         ` Chen-Yu Tsai
2016-07-30  7:34           ` Maxime Ripard
2016-07-29 10:12     ` Andre Przywara
2016-08-24 12:02     ` LABBE Corentin
2016-08-26 20:49       ` Maxime Ripard
2016-07-20  8:03 ` [PATCH v2 2/5] MAINTAINERS: Add myself as maintainers of sun8i-emac LABBE Corentin
2016-07-20  8:03 ` LABBE Corentin [this message]
2016-07-20 19:15   ` [PATCH v2 3/5] ARM: sun8i: dt: Add DT bindings documentation for Allwinner sun8i-emac Rob Herring
2016-07-28 13:21     ` LABBE Corentin
2016-07-21  7:55   ` Maxime Ripard
2016-07-28 13:40     ` LABBE Corentin
2016-07-28 18:49       ` Maxime Ripard
2016-07-29  8:15         ` LABBE Corentin
2016-07-29 18:12           ` Maxime Ripard
2016-07-20  8:03 ` [PATCH v2 4/5] ARM: dts: sun8i-h3: add sun8i-emac ethernet driver LABBE Corentin
2016-07-20  8:03 ` [PATCH v2 5/5] ARM: dts: sun8i: Enable sun8i-emac on the Orange PI PC LABBE Corentin
2016-07-25 13:16 ` [PATCH v2 0/5] net-next: ethernet: add sun8i-emac driver paulo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469001800-11615-4-git-send-email-clabbe.montjoie@gmail.com \
    --to=clabbe.montjoie@gmail.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®