From: "Noralf Trønnes" <noralf@tronnes.org>
To: dri-devel@lists.freedesktop.org
Cc: dh.herrmann@gmail.com, linux-kernel@vger.kernel.org,
"Noralf Trønnes" <noralf@tronnes.org>
Subject: [PATCH v2 0/3] drm: add SimpleDRM driver
Date: Fri, 5 Aug 2016 17:44:40 +0200 [thread overview]
Message-ID: <1470411883-3534-1-git-send-email-noralf@tronnes.org> (raw)
This patchset adds the simpledrm driver by David Herrmann based on a
patchset[1] from 2014. That patchset also included patches for kicking
out simpledrm by real drivers. I have stayed away from that since it
involves another subsystem and I would probably be unable to answer any
questions about the implementation.
Two major changes in this version:
I have tried to address Daniel Vetter's concern that there's no way to
kick out/handover simpledrm to the real hw-driver. My solution relies
on the fb notifier, so I don't know how robust that actually is. I've
read that there's lot's of problems with it, at least in the drm context.
A test using the vc4 driver on Raspberry Pi successfully removed simpledrm.
Luc Verhaegen alerted me to the fact that I missed support for clocks, and
in fact more additions to the Device Tree binding document that has happen
after David wrote this driver. I lifted the code verbatim from simplefb.c.
I have not tested the functionality, but I assume it will work since I
didn't make any functional changes, only changed function and variable names.
I have tested simpledrm on a Raspberry Pi B+ with U-boot setting up the
framebuffer and producing this node (legacy, not under /chosen):
/ {
framebuffer@1e887000 {
compatible = "simple-framebuffer";
reg = <0x1e887000 0x36c600>;
format = "r5g6b5";
width = <1824>;
height = <984>;
stride = <3648>;
status = "okay";
};
I have only tested with fbcon and modetest (XR24,RG16).
Noralf.
Changes from version 1:
- Move platform_set_drvdata() before drm_dev_register()
- Remove drm_legacy_mmap() call.
- Set mode_config.{min,max}_{width,height} to the actual dimensions
of the native framebuffer
- Remove plane positioning since it won't work with the simple display pipe,
meaning sdrm_display_pipe_check() isn't necessary either
- Support the additions to the Device Tree binding document, including
clocks, regulators and having the node under /chosen
fbdev:
- Honour remove_conflicting_framebuffers()
Changes from previous version[2]:
- Remove FB_SIMPLE=n dependency to avoid kconfig recursive error
- Changed module name to match kconfig help text: sdrm -> simpledrm
- Use drm_simple_display_pipe
- Replace deprecated drm_platform_init()
- sdrm_dumb_create(): drm_gem_object_unreference() -> *_unlocked()
- sdrm_dumb_map_offset(): drm_gem_object_lookup() remove drm_device parameter
- sdrm_drm_mmap() changes:
Remove struct_mutex locking
Add drm_vma_offset_{lock,unlock}_lookup()
drm_mmap() -> drm_legacy_mmap()
- dma_buf_begin_cpu_access() doesn't require start and length anymore
- Use drm_cvt_mode() instead of open coding a mode
- Fix format conversion. In the intermediate step, store the 8/6/5 bit color
value in the upper part of the 16-bit color variable, not the lower.
- Support clips == NULL in sdrm_dirty()
- Set mode_config.preferred_depth
- Attach mode_config.dirty_info_property to connector
fbdev:
- Remove the DRM_SIMPLEDRM_FBDEV kconfig option and use DRM_FBDEV_EMULATION
- Suspend fbcon/fbdev when the pipeline is enabled, resume in lastclose
- Add FBINFO_CAN_FORCE_OUTPUT flag so we get oops'es on the console
[1] https://lists.freedesktop.org/archives/dri-devel/2014-January/052584.html
[2] https://lists.freedesktop.org/archives/dri-devel/2014-January/052594.html
Further history:
[PATCH v4 0/6] SimpleDRM Driver
https://lists.freedesktop.org/archives/dri-devel/2013-September/044638.html
[PATCH v2 00/14] Platform Framebuffers and SimpleDRM
https://lists.freedesktop.org/archives/dri-devel/2013-July/041090.html
[RFC 0/6] SimpleDRM Driver (was: dvbe driver)
https://lists.freedesktop.org/archives/dri-devel/2013-June/040386.html
[PATCH 0/9] System Framebuffer Bus (sysfb)
https://lists.freedesktop.org/archives/dri-devel/2013-February/035013.html
Noralf Trønnes (3):
drm: add SimpleDRM driver
drm: simpledrm: add fbdev fallback support
drm: simpledrm: honour remove_conflicting_framebuffers()
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/simpledrm/Kconfig | 27 ++
drivers/gpu/drm/simpledrm/Makefile | 5 +
drivers/gpu/drm/simpledrm/simpledrm.h | 129 +++++++
drivers/gpu/drm/simpledrm/simpledrm_damage.c | 304 +++++++++++++++
drivers/gpu/drm/simpledrm/simpledrm_drv.c | 545 +++++++++++++++++++++++++++
drivers/gpu/drm/simpledrm/simpledrm_fbdev.c | 200 ++++++++++
drivers/gpu/drm/simpledrm/simpledrm_gem.c | 273 ++++++++++++++
drivers/gpu/drm/simpledrm/simpledrm_kms.c | 267 +++++++++++++
10 files changed, 1753 insertions(+)
create mode 100644 drivers/gpu/drm/simpledrm/Kconfig
create mode 100644 drivers/gpu/drm/simpledrm/Makefile
create mode 100644 drivers/gpu/drm/simpledrm/simpledrm.h
create mode 100644 drivers/gpu/drm/simpledrm/simpledrm_damage.c
create mode 100644 drivers/gpu/drm/simpledrm/simpledrm_drv.c
create mode 100644 drivers/gpu/drm/simpledrm/simpledrm_fbdev.c
create mode 100644 drivers/gpu/drm/simpledrm/simpledrm_gem.c
create mode 100644 drivers/gpu/drm/simpledrm/simpledrm_kms.c
--
2.8.2
next reply other threads:[~2016-08-05 15:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-05 15:44 Noralf Trønnes [this message]
2016-08-05 15:44 ` [PATCH v2 1/3] " Noralf Trønnes
2016-08-05 15:44 ` [PATCH v2 2/3] drm: simpledrm: add fbdev fallback support Noralf Trønnes
2016-08-05 22:38 ` Paul Gortmaker
2016-08-08 13:38 ` Noralf Trønnes
2016-08-05 15:44 ` [PATCH v2 3/3] drm: simpledrm: honour remove_conflicting_framebuffers() Noralf Trønnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470411883-3534-1-git-send-email-noralf@tronnes.org \
--to=noralf@tronnes.org \
--cc=dh.herrmann@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®