[PATCH v6 1/4] Documentation: mfd: LP873X: Add information for the mfd driver

[Keerthy <j-keerthy@ti.com>]

The lp873x series of PMICs have a bunch of regulators and a couple
of GPO(General Purpose Outputs).
Add information for the MFD and regulator drivers.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
Changes in v6:

  * Added more formating for properties.

Changes in v4:

  * Added the GPIO properties.

Changes in v3:

  * Changed the example node lable to pmic from lp8733.

 Documentation/devicetree/bindings/mfd/lp873x.txt | 59 ++++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt

diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
new file mode 100644
index 0000000..1377c25
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
@@ -0,0 +1,59 @@
+TI LP873X PMIC MFD driver
+
+Required properties:
+  - compatible:	"ti,lp8732", "ti,lp8733"
+  - reg:		I2C slave address.
+  - gpio-controller:	Marks the device node as a GPIO Controller.
+  - #gpio-cells:	Should be two.  The first cell is the pin number and
+			the second cell is used to specify flags.
+			See ../gpio/gpio.txt for more information.
+  - regulators:	List of child nodes that specify the regulator
+			initialization data.
+Example:
+
+pmic: lp8733@60 {
+	compatible = "ti,lp8733";
+	reg = <0x60>;
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	regulators {
+		lp8733_buck0: buck0 {
+			regulator-name = "lp8733-buck0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-min-microamp = <1500000>;
+			regulator-max-microamp = <4000000>;
+			regulator-ramp-delay = <10000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		lp8733_buck1: buck1 {
+			regulator-name = "lp8733-buck1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-min-microamp = <1500000>;
+			regulator-max-microamp = <4000000>;
+			regulator-ramp-delay = <10000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		lp8733_ldo0: ldo0 {
+			regulator-name = "lp8733-ldo0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		lp8733_ldo1: ldo1 {
+			regulator-name = "lp8733-ldo1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
-- 
1.9.1