mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH v2 1/4] rtc: ds1307: fix century bit support
Date: Sat, 13 Aug 2016 02:04:59 +0200	[thread overview]
Message-ID: <1471046702-20231-1-git-send-email-alexandre.belloni@free-electrons.com> (raw)

Add an option to properly support the century bit of ds1337 and compatibles
and ds1340.
Because the driver had a bug until now, it is not possible to switch users
to the fixed code directly as RTCs in the field will wrongly have the
century bit set.

Acked-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
Changes in v2:
 - use proper bit operations (& instead of &&)


 drivers/rtc/Kconfig      | 14 ++++++++++++++
 drivers/rtc/rtc-ds1307.c | 48 +++++++++++++++++++++++++++++++++++++++++++-----
 2 files changed, 57 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e215f50794b6..022e833c2143 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -224,6 +224,20 @@ config RTC_DRV_DS1307_HWMON
 	  Say Y here if you want to expose temperature sensor data on
 	  rtc-ds1307 (only DS3231)
 
+config RTC_DRV_DS1307_CENTURY
+	bool "Century bit support for rtc-ds1307"
+	depends on RTC_DRV_DS1307
+	default n
+	help
+	  The DS1307 driver suffered from a bug where it was enabling the
+	  century bit inconditionnally but never used it when reading the time.
+	  It made the driver unable to support dates beyond 2099.
+	  Setting this option will add proper support for the century bit but if
+	  the time was previously set using a kernel predating this option,
+	  reading the date will return a date in the next century.
+	  To solve that, you could boot a kernel without this option set, set
+	  the RTC date and then boot a kernel with this option set.
+
 config RTC_DRV_DS1374
 	tristate "Dallas/Maxim DS1374"
 	help
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 8e1c5cb6ece6..712e221d2415 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -382,10 +382,25 @@ static int ds1307_get_time(struct device *dev, struct rtc_time *t)
 	t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
 	tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
 	t->tm_mon = bcd2bin(tmp) - 1;
-
-	/* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */
 	t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
 
+#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
+	switch (ds1307->type) {
+	case ds_1337:
+	case ds_1339:
+	case ds_3231:
+		if (ds1307->regs[DS1307_REG_MONTH] & DS1337_BIT_CENTURY)
+			t->tm_year += 100;
+		break;
+	case ds_1340:
+		if (ds1307->regs[DS1307_REG_HOUR] & DS1340_BIT_CENTURY)
+			t->tm_year += 100;
+		break;
+	default:
+		break;
+	}
+#endif
+
 	dev_dbg(dev, "%s secs=%d, mins=%d, "
 		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
 		"read", t->tm_sec, t->tm_min,
@@ -409,6 +424,27 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
 		t->tm_hour, t->tm_mday,
 		t->tm_mon, t->tm_year, t->tm_wday);
 
+#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
+	if (t->tm_year < 100)
+		return -EINVAL;
+
+	switch (ds1307->type) {
+	case ds_1337:
+	case ds_1339:
+	case ds_3231:
+	case ds_1340:
+		if (t->tm_year > 299)
+			return -EINVAL;
+	default:
+		if (t->tm_year > 199)
+			return -EINVAL;
+		break;
+	}
+#else
+	if (t->tm_year < 100 || t->tm_year > 199)
+		return -EINVAL;
+#endif
+
 	buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
 	buf[DS1307_REG_MIN] = bin2bcd(t->tm_min);
 	buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
@@ -424,11 +460,13 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
 	case ds_1337:
 	case ds_1339:
 	case ds_3231:
-		buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
+		if (t->tm_year > 199)
+			buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
 		break;
 	case ds_1340:
-		buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN
-				| DS1340_BIT_CENTURY;
+		buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN;
+		if (t->tm_year > 199)
+			buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY;
 		break;
 	case mcp794xx:
 		/*
-- 
2.8.1

             reply	other threads:[~2016-08-13  0:05 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-13  0:04 Alexandre Belloni [this message]
2016-08-13  0:05 ` [PATCH v2 2/4] rtc: ds1307: add Intersil ISL12057 support Alexandre Belloni
2016-08-13  0:05 ` [PATCH v2 3/4] rtc: isl12057: remove driver Alexandre Belloni
2016-08-13  0:05 ` [PATCH v2 4/4] Documentation: dt: Intersil isl12057 is not a trivial device Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1471046702-20231-1-git-send-email-alexandre.belloni@free-electrons.com \
    --to=alexandre.belloni@free-electrons.com \
    --cc=a.zummo@towertech.it \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®