From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932666AbcHXN3z (ORCPT ); Wed, 24 Aug 2016 09:29:55 -0400 Received: from metis.ext.4.pengutronix.de ([92.198.50.35]:52750 "EHLO metis.ext.4.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754650AbcHXN30 (ORCPT ); Wed, 24 Aug 2016 09:29:26 -0400 From: Philipp Zabel To: linux-kernel@vger.kernel.org Cc: Masahiro Yamada , Arnd Bergmann , Axel Lin , Hans de Goede , Maxime Ripard , Lee Jones , linux-arm-kernel@lists.infradead.org, Philipp Zabel , Moritz Fischer , Michal Simek , =?UTF-8?q?S=C3=B6ren=20Brinkmann?= Subject: [PATCH 09/10] reset: zynq: add driver Kconfig option Date: Wed, 24 Aug 2016 15:29:01 +0200 Message-Id: <1472045342-7434-9-git-send-email-p.zabel@pengutronix.de> X-Mailer: git-send-email 2.8.1 In-Reply-To: <1472045342-7434-1-git-send-email-p.zabel@pengutronix.de> References: <1472045342-7434-1-git-send-email-p.zabel@pengutronix.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: p.zabel@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Moritz Fischer Cc: Michal Simek Cc: Sören Brinkmann Signed-off-by: Philipp Zabel --- drivers/reset/Kconfig | 6 ++++++ drivers/reset/Makefile | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 17030e2..86b49a2 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -67,6 +67,12 @@ config RESET_SUNXI help This enables the reset driver for Allwinner SoCs. +config RESET_ZYNQ + bool "ZYNQ Reset Driver" if COMPILE_TEST + default ARCH_ZYNQ + help + This enables the reset driver for Xilinx Zynq FPGAs. + config TI_SYSCON_RESET tristate "TI SYSCON Reset Driver" depends on HAS_IOMEM diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 4a163c7..56f90ea 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -1,7 +1,6 @@ obj-y += core.o obj-$(CONFIG_ARCH_STI) += sti/ obj-$(CONFIG_ARCH_HISI) += hisilicon/ -obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o obj-$(CONFIG_RESET_ATH79) += reset-ath79.o obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o @@ -13,3 +12,4 @@ obj-$(CONFIG_RESET_STM32) += reset-stm32.o obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o +obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o -- 2.8.1