mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ley Foon Tan <lftan@altera.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
	Ley Foon Tan <lftan.linux@gmail.com>,
	Ley Foon Tan <lftan@altera.com>
Subject: [PATCH v4 2/2] PCI: altera: Move retrain from _FIXUP to altera_pcie_host_init()
Date: Fri, 26 Aug 2016 09:47:25 +0800	[thread overview]
Message-ID: <1472176045-27815-3-git-send-email-lftan@altera.com> (raw)
In-Reply-To: <1472176045-27815-1-git-send-email-lftan@altera.com>

Altera PCIe IP can be configured as rootport or device and they might have
same vendor ID. It will cause the system hang issue if Altera PCIe is in
endpoint mode and work with other PCIe rootport that from other vendors.

Move link retrain function from _FIXUP to altera_pcie_host_init().

Signed-off-by: Ley Foon Tan <lftan@altera.com>
---
 drivers/pci/host/pcie-altera.c | 151 +++++++++++++++++++++++++----------------
 1 file changed, 91 insertions(+), 60 deletions(-)

diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c
index 34e6258..4ca50a2 100644
--- a/drivers/pci/host/pcie-altera.c
+++ b/drivers/pci/host/pcie-altera.c
@@ -43,6 +43,7 @@
 #define RP_LTSSM_MASK			0x1f
 #define LTSSM_L0			0xf
 
+#define PCIE_CAP_OFFSET			0x80
 /* TLP configuration type 0 and 1 */
 #define TLP_FMTTYPE_CFGRD0		0x04	/* Configuration Read Type 0 */
 #define TLP_FMTTYPE_CFGWR0		0x44	/* Configuration Write Type 0 */
@@ -100,66 +101,6 @@ static bool altera_pcie_link_is_up(struct altera_pcie *pcie)
 	return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
 }
 
-static void altera_wait_link_retrain(struct pci_dev *dev)
-{
-	u16 reg16;
-	unsigned long start_jiffies;
-	struct altera_pcie *pcie = dev->bus->sysdata;
-
-	/* Wait for link training end. */
-	start_jiffies = jiffies;
-	for (;;) {
-		pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &reg16);
-		if (!(reg16 & PCI_EXP_LNKSTA_LT))
-			break;
-
-		if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT)) {
-			dev_err(&pcie->pdev->dev, "link retrain timeout\n");
-			break;
-		}
-		udelay(100);
-	}
-
-	/* Wait for link is up */
-	start_jiffies = jiffies;
-	for (;;) {
-		if (altera_pcie_link_is_up(pcie))
-			break;
-
-		if (time_after(jiffies, start_jiffies + LINK_UP_TIMEOUT)) {
-			dev_err(&pcie->pdev->dev, "link up timeout\n");
-			break;
-		}
-		udelay(100);
-	}
-}
-
-static void altera_pcie_retrain(struct pci_dev *dev)
-{
-	u16 linkcap, linkstat;
-	struct altera_pcie *pcie = dev->bus->sysdata;
-
-	if (!altera_pcie_link_is_up(pcie))
-		return;
-
-	/*
-	 * Set the retrain bit if the PCIe rootport support > 2.5GB/s, but
-	 * current speed is 2.5 GB/s.
-	 */
-	pcie_capability_read_word(dev, PCI_EXP_LNKCAP, &linkcap);
-
-	if ((linkcap & PCI_EXP_LNKCAP_SLS) <= PCI_EXP_LNKCAP_SLS_2_5GB)
-		return;
-
-	pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &linkstat);
-	if ((linkstat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB) {
-		pcie_capability_set_word(dev, PCI_EXP_LNKCTL,
-					 PCI_EXP_LNKCTL_RL);
-		altera_wait_link_retrain(dev);
-	}
-}
-DECLARE_PCI_FIXUP_EARLY(0x1172, PCI_ANY_ID, altera_pcie_retrain);
-
 /*
  * Altera PCIe port uses BAR0 of RC's configuration space as the translation
  * from PCI bus to native BUS.  Entire DDR region is mapped into PCIe space
@@ -434,6 +375,90 @@ static struct pci_ops altera_pcie_ops = {
 	.write = altera_pcie_cfg_write,
 };
 
+static int altera_read_cap_word(struct altera_pcie *pcie, u8 busno,
+				unsigned int devfn, int offset, u16 *value)
+{
+	u32 data;
+	int ret;
+
+	ret = _altera_pcie_cfg_read(pcie, busno, devfn,
+				    PCIE_CAP_OFFSET + offset, sizeof(*value),
+				    &data);
+	*value = data;
+	return ret;
+}
+
+static int altera_write_cap_word(struct altera_pcie *pcie, u8 busno,
+				 unsigned int devfn, int offset, u16 value)
+{
+	return _altera_pcie_cfg_write(pcie, busno, devfn,
+				      PCIE_CAP_OFFSET + offset, sizeof(value),
+				      value);
+}
+
+static void altera_wait_link_retrain(struct altera_pcie *pcie)
+{
+	u16 reg16;
+	unsigned long start_jiffies;
+
+	/* Wait for link training end. */
+	start_jiffies = jiffies;
+	for (;;) {
+		altera_read_cap_word(pcie, pcie->root_bus_nr, RP_DEVFN,
+				     PCI_EXP_LNKSTA, &reg16);
+		if (!(reg16 & PCI_EXP_LNKSTA_LT))
+			break;
+
+		if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT)) {
+			dev_err(&pcie->pdev->dev, "link retrain timeout\n");
+			break;
+		}
+		udelay(100);
+	}
+
+	/* Wait for link is up */
+	start_jiffies = jiffies;
+	for (;;) {
+		if (altera_pcie_link_is_up(pcie))
+			break;
+
+		if (time_after(jiffies, start_jiffies + LINK_UP_TIMEOUT)) {
+			dev_err(&pcie->pdev->dev, "link up timeout\n");
+			break;
+		}
+		udelay(100);
+	}
+}
+
+static void altera_pcie_retrain(struct altera_pcie *pcie)
+{
+	u16 linkcap, linkstat, linkctl;
+
+	if (!altera_pcie_link_is_up(pcie))
+		return;
+
+	/*
+	 * Set the retrain bit if the PCIe rootport support > 2.5GB/s, but
+	 * current speed is 2.5 GB/s.
+	 */
+	altera_read_cap_word(pcie, pcie->root_bus_nr, RP_DEVFN, PCI_EXP_LNKCAP,
+			     &linkcap);
+	if ((linkcap & PCI_EXP_LNKCAP_SLS) <= PCI_EXP_LNKCAP_SLS_2_5GB)
+		return;
+
+	altera_read_cap_word(pcie, pcie->root_bus_nr, RP_DEVFN, PCI_EXP_LNKSTA,
+			     &linkstat);
+	if ((linkstat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB) {
+		altera_read_cap_word(pcie, pcie->root_bus_nr, RP_DEVFN,
+				     PCI_EXP_LNKCTL, &linkctl);
+		linkctl |= PCI_EXP_LNKCTL_RL;
+		altera_write_cap_word(pcie, pcie->root_bus_nr, RP_DEVFN,
+				      PCI_EXP_LNKCTL, linkctl);
+
+		altera_wait_link_retrain(pcie);
+	}
+}
+
 static int altera_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
 				irq_hw_number_t hwirq)
 {
@@ -555,6 +580,11 @@ static int altera_pcie_parse_dt(struct altera_pcie *pcie)
 	return 0;
 }
 
+static void altera_pcie_host_init(struct altera_pcie *pcie)
+{
+	altera_pcie_retrain(pcie);
+}
+
 static int altera_pcie_probe(struct platform_device *pdev)
 {
 	struct altera_pcie *pcie;
@@ -592,6 +622,7 @@ static int altera_pcie_probe(struct platform_device *pdev)
 	cra_writel(pcie, P2A_INT_STS_ALL, P2A_INT_STATUS);
 	/* enable all interrupts */
 	cra_writel(pcie, P2A_INT_ENA_ALL, P2A_INT_ENABLE);
+	altera_pcie_host_init(pcie);
 
 	bus = pci_scan_root_bus(&pdev->dev, pcie->root_bus_nr, &altera_pcie_ops,
 				pcie, &pcie->resources);
-- 
1.8.2.1

  parent reply	other threads:[~2016-08-26  2:02 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-26  1:47 [PATCH v4 0/2] PCI: altera: Retrain link in rootport mode only Ley Foon Tan
2016-08-26  1:47 ` [PATCH v4 1/2] PCI: altera: Rework configs accessors Ley Foon Tan
2016-08-26  1:47 ` Ley Foon Tan [this message]
2016-09-01  1:17 ` [PATCH v4 0/2] PCI: altera: Retrain link in rootport mode only Ley Foon Tan
2016-09-12 21:55 ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1472176045-27815-3-git-send-email-lftan@altera.com \
    --to=lftan@altera.com \
    --cc=bhelgaas@google.com \
    --cc=lftan.linux@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®