From: Amit Ghadge <amitg.b14@gmail.com>
To: abbotti@mev.co.uk
Cc: gregkh@linuxfoundation.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, Amit Ghadge <amitg.b14@gmail.com>
Subject: [PATCH] Staging: comedi: das08_cs: Fix block comments use * on subsequent lines.
Date: Sun, 4 Sep 2016 21:54:49 +0530 [thread overview]
Message-ID: <1473006289-17772-1-git-send-email-amitg.b14@gmail.com> (raw)
Fixes checkpatch warning in das08_cs.c file:
WARNING: Block comments use * on subsequent lines
Signed-off-by: Amit Ghadge <amitg.b14@gmail.com>
---
drivers/staging/comedi/drivers/das08_cs.c | 70 +++++++++++++++----------------
1 file changed, 35 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index 9c02b17..1c5a0d8 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -1,43 +1,43 @@
/*
- comedi/drivers/das08_cs.c
- DAS08 driver
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 2000 David A. Schleef <ds@schleef.org>
- Copyright (C) 2001,2002,2003 Frank Mori Hess <fmhess@users.sourceforge.net>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- PCMCIA support code for this driver is adapted from the dummy_cs.c
- driver of the Linux PCMCIA Card Services package.
-
- The initial developer of the original code is David A. Hinds
- <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
-*/
+ * comedi/drivers/das08_cs.c
+ * DAS08 driver
+
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ * Copyright (C) 2001,2002,2003 Frank Mori Hess <fmhess@users.sourceforge.net>
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * PCMCIA support code for this driver is adapted from the dummy_cs.c
+ * driver of the Linux PCMCIA Card Services package.
+
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+ */
/*
-Driver: das08_cs
-Description: DAS-08 PCMCIA boards
-Author: Warren Jasper, ds, Frank Hess
-Devices: [ComputerBoards] PCM-DAS08 (pcm-das08)
-Status: works
+ * Driver: das08_cs
+ * Description: DAS-08 PCMCIA boards
+ * Author: Warren Jasper, ds, Frank Hess
+ * Devices: [ComputerBoards] PCM-DAS08 (pcm-das08)
+ * Status: works
-This is the PCMCIA-specific support split off from the
-das08 driver.
+ * This is the PCMCIA-specific support split off from the
+ * das08 driver.
-Options (for pcm-das08):
- NONE
+ * Options (for pcm-das08):
+ * NONE
-Command support does not exist, but could be added for this board.
-*/
+ * Command support does not exist, but could be added for this board.
+ */
#include <linux/module.h>
--
2.5.5
reply other threads:[~2016-09-04 16:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473006289-17772-1-git-send-email-amitg.b14@gmail.com \
--to=amitg.b14@gmail.com \
--cc=abbotti@mev.co.uk \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®