From: Chris Zhong <zyw@rock-chips.com>
To: kishon@ti.com, groeck@chromium.org, wulf@rock-chips.com,
briannorris@chromium.org, heiko@sntech.de, dianders@chromium.org,
kever.yang@rock-chips.com
Cc: linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Chris Zhong <zyw@rock-chips.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] phy: rockchip-typec: add pm runtime support
Date: Wed, 7 Sep 2016 16:06:16 -0700 [thread overview]
Message-ID: <1473289577-14101-1-git-send-email-zyw@rock-chips.com> (raw)
Adds pm_runtime support for rockchip Type-C, so that power domain is
enabled only when there is a transaction going on to help save power.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v2:
-- add pm_runtime_put_sync in err case
drivers/phy/phy-rockchip-typec.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
index fb58a27..0b2f528 100644
--- a/drivers/phy/phy-rockchip-typec.c
+++ b/drivers/phy/phy-rockchip-typec.c
@@ -552,6 +552,12 @@ static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
goto err_clk_core;
}
+ ret = pm_runtime_get_sync(tcphy->dev);
+ if (ret < 0) {
+ dev_err(tcphy->dev, "cannot get pm runtime %d\n", ret);
+ goto err_clk_ref;
+ }
+
reset_control_deassert(tcphy->tcphy_rst);
property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
@@ -600,8 +606,10 @@ static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
return 0;
err_wait_pma:
+ pm_runtime_put_sync(tcphy->dev);
reset_control_assert(tcphy->uphy_rst);
reset_control_assert(tcphy->tcphy_rst);
+err_clk_ref:
clk_disable_unprepare(tcphy->clk_ref);
err_clk_core:
clk_disable_unprepare(tcphy->clk_core);
@@ -610,6 +618,7 @@ err_clk_core:
static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
{
+ pm_runtime_put_sync(tcphy->dev);
reset_control_assert(tcphy->tcphy_rst);
reset_control_assert(tcphy->uphy_rst);
reset_control_assert(tcphy->pipe_rst);
@@ -987,6 +996,15 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
return PTR_ERR(phy_provider);
}
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+
+static int rockchip_typec_phy_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
return 0;
}
@@ -999,6 +1017,7 @@ MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
static struct platform_driver rockchip_typec_phy_driver = {
.probe = rockchip_typec_phy_probe,
+ .remove = rockchip_typec_phy_remove,
.driver = {
.name = "rockchip-typec-phy",
.of_match_table = rockchip_typec_phy_dt_ids,
--
1.9.1
next reply other threads:[~2016-09-07 23:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-07 23:06 Chris Zhong [this message]
2016-09-07 23:06 ` [PATCH v2 2/2] arm64: dts: rk3399: add powerdomain for typec Chris Zhong
2016-09-08 15:16 ` Heiko Stuebner
2016-09-08 5:24 ` [PATCH v2 1/2] phy: rockchip-typec: add pm runtime support Kishon Vijay Abraham I
2016-09-08 5:57 ` [RESEND PATCH v3 " Chris Zhong
2016-09-08 15:31 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473289577-14101-1-git-send-email-zyw@rock-chips.com \
--to=zyw@rock-chips.com \
--cc=briannorris@chromium.org \
--cc=dianders@chromium.org \
--cc=groeck@chromium.org \
--cc=heiko@sntech.de \
--cc=kever.yang@rock-chips.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=wulf@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome