From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759108AbcILOI5 (ORCPT ); Mon, 12 Sep 2016 10:08:57 -0400 Received: from ec2-52-27-115-49.us-west-2.compute.amazonaws.com ([52.27.115.49]:59807 "EHLO s-opensource.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933163AbcILOE3 (ORCPT ); Mon, 12 Sep 2016 10:04:29 -0400 From: Javier Martinez Canillas To: linux-kernel@vger.kernel.org Cc: Javier Martinez Canillas , Dept-HSGLinuxNICDev@qlogic.com, Sony Chacko , netdev@vger.kernel.org Subject: [PATCH 04/15] bnx2: use IS_ENABLED() instead of checking for built-in or module Date: Mon, 12 Sep 2016 10:03:35 -0400 Message-Id: <1473689026-6983-5-git-send-email-javier@osg.samsung.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1473689026-6983-1-git-send-email-javier@osg.samsung.com> References: <1473689026-6983-1-git-send-email-javier@osg.samsung.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas --- drivers/net/ethernet/broadcom/bnx2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 8fc3f3c137f8..ecd357dbb1d4 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -50,7 +50,7 @@ #include #include -#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE) +#if IS_ENABLED(CONFIG_CNIC) #define BCM_CNIC 1 #include "cnic_if.h" #endif -- 2.7.4