From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757018AbcIMIyj (ORCPT ); Tue, 13 Sep 2016 04:54:39 -0400 Received: from mx0a-001ae601.pphosted.com ([67.231.149.25]:48230 "EHLO mx0b-001ae601.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756061AbcIMIyh (ORCPT ); Tue, 13 Sep 2016 04:54:37 -0400 Authentication-Results: ppops.net; spf=none smtp.mailfrom=rf@opensource.wolfsonmicro.com Message-ID: <1473756872.4359.28.camel@rf-debian.wolfsonmicro.main> Subject: Re: [PATCH v3] mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config From: Richard Fitzgerald To: Rob Herring CC: , , , Date: Tue, 13 Sep 2016 09:54:32 +0100 In-Reply-To: <20160912165342.GA25141@rob-hp-laptop> References: <1473076585-9823-1-git-send-email-rf@opensource.wolfsonmicro.com> <20160912165342.GA25141@rob-hp-laptop> Content-Type: text/plain; charset="us-ascii" X-Mailer: Evolution 3.4.4-3 MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 priorityscore=1501 malwarescore=0 suspectscore=0 phishscore=0 bulkscore=0 spamscore=0 clxscore=1011 lowpriorityscore=0 impostorscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1609020000 definitions=main-1609130131 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, 2016-09-12 at 11:53 -0500, Rob Herring wrote: > On Mon, Sep 05, 2016 at 12:56:25PM +0100, Richard Fitzgerald wrote: > > This patch adds DT settings for the max_channels_clocked, spk_fmt and > > spk_mute pdata. > > > > Signed-off-by: Richard Fitzgerald > > --- > > Documentation/devicetree/bindings/mfd/arizona.txt | 18 ++++++++++++++ > > drivers/mfd/arizona-core.c | 30 +++++++++++++++++++++++ > > 2 files changed, 48 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt > > index a6e2ea41..8f2e282 100644 > > --- a/Documentation/devicetree/bindings/mfd/arizona.txt > > +++ b/Documentation/devicetree/bindings/mfd/arizona.txt > > @@ -85,6 +85,24 @@ Optional properties: > > present, the number of values should be less than or equal to the > > number of inputs, unspecified inputs will use the chip default. > > > > + - wlf,max-channels-clocked : The maximum number of channels to be clocked on > > + each AIF, useful for I2S systems with multiple data lines being mastered. > > + Specify one cell for each AIF to be configured, specify zero for AIFs that > > + should be handled normally. > > + If present, number of cells must be less than or equal to the number of > > + AIFs. If less than the number of AIFs, for cells that have not been > > + specified the corresponding AIFs will be treated as default setting. > > + > > + - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). > > + See the datasheet for values. > > + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, > > + wm8998, wm1814) > > + > > + - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). > > + See the datasheet for values. > > + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, > > + wm8998, wm1814) > > + > > - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if > > they are being externally supplied. As covered in > > Documentation/devicetree/bindings/regulator/regulator.txt > > diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c > > index fa267fa..c621c46 100644 > > --- a/drivers/mfd/arizona-core.c > > +++ b/drivers/mfd/arizona-core.c > > @@ -813,6 +813,7 @@ static int arizona_of_get_core_pdata(struct arizona *arizona) > > struct property *prop; > > const __be32 *cur; > > u32 val; > > + u32 pdm_val[ARIZONA_MAX_PDM_SPK]; > > int ret, i; > > int count = 0; > > > > @@ -869,6 +870,35 @@ static int arizona_of_get_core_pdata(struct arizona *arizona) > > count++; > > } > > > > + count = 0; > > + of_property_for_each_u32(arizona->dev->of_node, > > + "wlf,max-channels-clocked", > > + prop, cur, val) { > > + if (count == ARRAY_SIZE(pdata->max_channels_clocked)) > > + break; > > + > > + pdata->max_channels_clocked[count] = val; > > + count++; > > + } > > + > > + ret = of_property_read_u32_array(arizona->dev->of_node, > > + "wlf,spk-fmt", > > + pdm_val, > > + ARRAY_SIZE(pdm_val)); > > Why are you using this intermediate buffer? > Because targets are not u32 > > + > > + if (ret >= 0) > > + for (count = 0; count < ARRAY_SIZE(pdata->spk_fmt); ++count) > > + pdata->spk_fmt[count] = pdm_val[count]; > > + > > + ret = of_property_read_u32_array(arizona->dev->of_node, > > + "wlf,spk-mute", > > + pdm_val, > > + ARRAY_SIZE(pdm_val)); > > + > > + if (ret >= 0) > > + for (count = 0; count < ARRAY_SIZE(pdata->spk_fmt); ++count) > > s/spk_fmt/spk_mute/ > Damn!, I read and re-read and re-re-read that code so many times to make sure I had the right names > > + pdata->spk_mute[count] = pdm_val[count]; > > + > > return 0; > > } > > > > -- > > 1.9.1 > >