From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756768AbcJPPAu (ORCPT ); Sun, 16 Oct 2016 11:00:50 -0400 Received: from conuserg-12.nifty.com ([210.131.2.79]:25213 "EHLO conuserg-12.nifty.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756546AbcJPPAi (ORCPT ); Sun, 16 Oct 2016 11:00:38 -0400 DKIM-Filter: OpenDKIM Filter v2.10.3 conuserg-12.nifty.com u9GExPp7010750 X-Nifty-SrcIP: [111.169.71.157] From: Masahiro Yamada To: linux-arm-kernel@lists.infradead.org Cc: Viresh Kumar , Masahiro Yamada , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring , Will Deacon , Mark Rutland , Catalin Marinas Subject: [PATCH 2/3] arm64: dts: uniphier: add CPU clock and OPP table for LD11 SoC Date: Sun, 16 Oct 2016 23:59:17 +0900 Message-Id: <1476629958-25368-3-git-send-email-yamada.masahiro@socionext.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1476629958-25368-1-git-send-email-yamada.masahiro@socionext.com> References: <1476629958-25368-1-git-send-email-yamada.masahiro@socionext.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add a CPU clock to every CPU node and a CPU OPP table to use the generic cpufreq driver. Note: clock-latency-ns (300ns) was calculated based on the CPU-gear switch sequencer spec; it takes 12 clock cycles on the sequencer running at 50 MHz, plus a bit additional latency. Signed-off-by: Masahiro Yamada --- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 38 ++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 73e0acf..e3eb10f 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -70,14 +70,18 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x000>; + clocks = <&sys_clk 33>; enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x001>; + clocks = <&sys_clk 33>; enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; }; @@ -86,6 +90,40 @@ method = "smc"; }; + cluster0_opp: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp@245000000 { + opp-hz = /bits/ 64 <245000000>; + clock-latency-ns = <300>; + }; + opp@250000000 { + opp-hz = /bits/ 64 <250000000>; + clock-latency-ns = <300>; + }; + opp@490000000 { + opp-hz = /bits/ 64 <490000000>; + clock-latency-ns = <300>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <300>; + }; + opp@653333333 { + opp-hz = /bits/ 64 <653334000>; + clock-latency-ns = <300>; + }; + opp@666666666 { + opp-hz = /bits/ 64 <666667000>; + clock-latency-ns = <300>; + }; + opp@980000000 { + opp-hz = /bits/ 64 <980000000>; + clock-latency-ns = <300>; + }; + }; + clocks { refclk: ref { compatible = "fixed-clock"; -- 1.9.1