From: Pankaj Bharadiya <pankaj.bharadiya@gmail.com>
To: gregkh@linuxfoundation.org, lidza.louina@gmail.com
Cc: markh@compro.net, driverdev-devel@linuxdriverproject.org,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] staging: dgnc: Replace CamelCase namings with underscores.
Date: Mon, 17 Oct 2016 01:13:55 +0530 [thread overview]
Message-ID: <1476647035-23634-1-git-send-email-pankaj.bharadiya@gmail.com> (raw)
Replace CamelCase names with underscores to comply with the standard
kernel coding style.
Signed-off-by: Pankaj Bharadiya <pankaj.bharadiya@gmail.com>
---
drivers/staging/dgnc/dgnc_tty.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/dgnc/dgnc_tty.c b/drivers/staging/dgnc/dgnc_tty.c
index ef9a45b..1a21902 100644
--- a/drivers/staging/dgnc/dgnc_tty.c
+++ b/drivers/staging/dgnc/dgnc_tty.c
@@ -45,7 +45,7 @@
/*
* internal variables
*/
-static unsigned char *dgnc_TmpWriteBuf;
+static unsigned char *dgnc_tmp_write_buf;
/*
* Default transparent print information.
@@ -69,7 +69,7 @@
* This defines a raw port at 9600 baud, 8 data bits, no parity,
* 1 stop bit.
*/
-static struct ktermios DgncDefaultTermios = {
+static struct ktermios dgnc_default_termios = {
.c_iflag = (DEFAULT_IFLAGS), /* iflags */
.c_oflag = (DEFAULT_OFLAGS), /* oflags */
.c_cflag = (DEFAULT_CFLAGS), /* cflags */
@@ -160,9 +160,9 @@ int dgnc_tty_preinit(void)
* is only called during module load, (not in interrupt context),
* and with no locks held.
*/
- dgnc_TmpWriteBuf = kmalloc(WRITEBUFLEN, GFP_KERNEL);
+ dgnc_tmp_write_buf = kmalloc(WRITEBUFLEN, GFP_KERNEL);
- if (!dgnc_TmpWriteBuf)
+ if (!dgnc_tmp_write_buf)
return -ENOMEM;
return 0;
@@ -194,7 +194,7 @@ int dgnc_tty_register(struct dgnc_board *brd)
brd->serial_driver->minor_start = 0;
brd->serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
brd->serial_driver->subtype = SERIAL_TYPE_NORMAL;
- brd->serial_driver->init_termios = DgncDefaultTermios;
+ brd->serial_driver->init_termios = dgnc_default_termios;
brd->serial_driver->driver_name = DRVSTR;
/*
@@ -233,7 +233,7 @@ int dgnc_tty_register(struct dgnc_board *brd)
brd->print_driver->minor_start = 0x80;
brd->print_driver->type = TTY_DRIVER_TYPE_SERIAL;
brd->print_driver->subtype = SERIAL_TYPE_NORMAL;
- brd->print_driver->init_termios = DgncDefaultTermios;
+ brd->print_driver->init_termios = dgnc_default_termios;
brd->print_driver->driver_name = DRVSTR;
/*
@@ -371,8 +371,8 @@ int dgnc_tty_init(struct dgnc_board *brd)
*/
void dgnc_tty_post_uninit(void)
{
- kfree(dgnc_TmpWriteBuf);
- dgnc_TmpWriteBuf = NULL;
+ kfree(dgnc_tmp_write_buf);
+ dgnc_tmp_write_buf = NULL;
}
/*
@@ -1543,7 +1543,7 @@ static int dgnc_tty_write_room(struct tty_struct *tty)
int ret = 0;
unsigned long flags;
- if (!tty || !dgnc_TmpWriteBuf)
+ if (!tty || !dgnc_tmp_write_buf)
return 0;
un = tty->driver_data;
@@ -1623,7 +1623,7 @@ static int dgnc_tty_write(struct tty_struct *tty,
ushort tmask;
uint remain;
- if (!tty || !dgnc_TmpWriteBuf)
+ if (!tty || !dgnc_tmp_write_buf)
return 0;
un = tty->driver_data;
--
1.9.1
next reply other threads:[~2016-10-16 19:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-16 19:43 Pankaj Bharadiya [this message]
2016-10-17 7:46 ` Greg KH
2016-10-18 2:28 ` Pankaj Bharadiya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476647035-23634-1-git-send-email-pankaj.bharadiya@gmail.com \
--to=pankaj.bharadiya@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=driverdev-devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=lidza.louina@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=markh@compro.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®