From: Ivan Safonov <insafonov@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Bhaktipriya Shridhar <bhaktipriya96@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Geliang Tang <geliangtang@163.com>,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Cc: insafonov@gmail.com
Subject: [PATCH 07/37] staging:r8188eu: remove is2t argument if the phy_iq_calibrate function
Date: Wed, 19 Oct 2016 22:07:35 +0700 [thread overview]
Message-ID: <1476889685-7367-7-git-send-email-insafonov@gmail.com> (raw)
In-Reply-To: <1476889685-7367-1-git-send-email-insafonov@gmail.com>
is2t argument of this function is constant.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
---
drivers/staging/rtl8188eu/hal/phy.c | 101 +++---------------------------------
1 file changed, 6 insertions(+), 95 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index c344882..6c6becf 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -687,41 +687,6 @@ static u8 phy_path_a_rx_iqk(struct adapter *adapt, bool configPathB)
return result;
}
-static u8 phy_path_b_iqk(struct adapter *adapt)
-{
- u32 regeac, regeb4, regebc, regec4, regecc;
- u8 result = 0x00;
- struct odm_dm_struct *dm_odm = &adapt->HalData->odmpriv;
-
- /* One shot, path B LOK & IQK */
- phy_set_bb_reg(adapt, rIQK_AGC_Cont, bMaskDWord, 0x00000002);
- phy_set_bb_reg(adapt, rIQK_AGC_Cont, bMaskDWord, 0x00000000);
-
- mdelay(IQK_DELAY_TIME_88E);
-
- regeac = phy_query_bb_reg(adapt, rRx_Power_After_IQK_A_2, bMaskDWord);
- regeb4 = phy_query_bb_reg(adapt, rTx_Power_Before_IQK_B, bMaskDWord);
- regebc = phy_query_bb_reg(adapt, rTx_Power_After_IQK_B, bMaskDWord);
- regec4 = phy_query_bb_reg(adapt, rRx_Power_Before_IQK_B_2, bMaskDWord);
- regecc = phy_query_bb_reg(adapt, rRx_Power_After_IQK_B_2, bMaskDWord);
-
- if (!(regeac & BIT(31)) &&
- (((regeb4 & 0x03FF0000)>>16) != 0x142) &&
- (((regebc & 0x03FF0000)>>16) != 0x42))
- result |= 0x01;
- else
- return result;
-
- if (!(regeac & BIT(30)) &&
- (((regec4 & 0x03FF0000)>>16) != 0x132) &&
- (((regecc & 0x03FF0000)>>16) != 0x36))
- result |= 0x02;
- else
- ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION,
- ODM_DBG_LOUD, ("Path B Rx IQK fail!!\n"));
- return result;
-}
-
static void patha_fill_iqk(struct adapter *adapt, bool iqkok, s32 result[][8],
u8 final_candidate, bool txonly)
{
@@ -839,14 +804,6 @@ static void mac_setting_calibration(struct adapter *adapt, u32 *mac_reg, u32 *ba
usb_write8(adapt, mac_reg[i], (u8)(backup[i]&(~BIT(5))));
}
-static void path_a_standby(struct adapter *adapt)
-{
-
- phy_set_bb_reg(adapt, rFPGA0_IQK, bMaskDWord, 0x0);
- phy_set_bb_reg(adapt, 0x840, bMaskDWord, 0x00010000);
- phy_set_bb_reg(adapt, rFPGA0_IQK, bMaskDWord, 0x80800000);
-}
-
static void pi_mode_switch(struct adapter *adapt, bool pi_mode)
{
u32 mode;
@@ -930,12 +887,11 @@ static bool simularity_compare(struct adapter *adapt, s32 resulta[][8],
}
}
-static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
- u8 t, bool is2t)
+static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8], u8 t)
{
struct odm_dm_struct *dm_odm = &adapt->HalData->odmpriv;
u32 i, retry_count = 2;
- u8 path_a_ok, path_b_ok;
+ u8 path_a_ok;
u32 adda_reg[IQK_ADDA_REG_NUM] = {
rFPGA0_XCD_SwitchControl, rBlue_Tooth,
rRx_Wait_CCA, rTx_CCK_RFON,
@@ -968,7 +924,7 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
dm_odm->RFCalibrateInfo.IQK_BB_backup, IQK_BB_REG_NUM);
}
- path_adda_on(adapt, adda_reg, true, is2t);
+ path_adda_on(adapt, adda_reg, true, 0);
if (t == 0)
dm_odm->RFCalibrateInfo.bRfPiEnable = (u8)phy_query_bb_reg(adapt, rFPGA0_XA_HSSIParameter1,
BIT(8));
@@ -989,13 +945,6 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
phy_set_bb_reg(adapt, rFPGA0_XA_RFInterfaceOE, BIT(10), 0x00);
phy_set_bb_reg(adapt, rFPGA0_XB_RFInterfaceOE, BIT(10), 0x00);
- if (is2t) {
- phy_set_bb_reg(adapt, rFPGA0_XA_LSSIParameter, bMaskDWord,
- 0x00010000);
- phy_set_bb_reg(adapt, rFPGA0_XB_LSSIParameter, bMaskDWord,
- 0x00010000);
- }
-
/* MAC settings */
mac_setting_calibration(adapt, iqk_mac_reg,
dm_odm->RFCalibrateInfo.IQK_MAC_backup);
@@ -1004,16 +953,13 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
/* AP or IQK */
phy_set_bb_reg(adapt, rConfig_AntA, bMaskDWord, 0x0f600000);
- if (is2t)
- phy_set_bb_reg(adapt, rConfig_AntB, bMaskDWord, 0x0f600000);
-
/* IQ calibration setting */
phy_set_bb_reg(adapt, rFPGA0_IQK, bMaskDWord, 0x80800000);
phy_set_bb_reg(adapt, rTx_IQK, bMaskDWord, 0x01007c00);
phy_set_bb_reg(adapt, rRx_IQK, bMaskDWord, 0x81004800);
for (i = 0; i < retry_count; i++) {
- path_a_ok = phy_path_a_iqk(adapt, is2t);
+ path_a_ok = phy_path_a_iqk(adapt, 0);
if (path_a_ok == 0x01) {
result[t][0] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_A,
bMaskDWord)&0x3FF0000)>>16;
@@ -1024,7 +970,7 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
}
for (i = 0; i < retry_count; i++) {
- path_a_ok = phy_path_a_rx_iqk(adapt, is2t);
+ path_a_ok = phy_path_a_rx_iqk(adapt, 0);
if (path_a_ok == 0x03) {
result[t][2] = (phy_query_bb_reg(adapt, rRx_Power_Before_IQK_A_2,
bMaskDWord)&0x3FF0000)>>16;
@@ -1042,38 +988,6 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
("Path A IQK failed!!\n"));
}
- if (is2t) {
- path_a_standby(adapt);
-
- /* Turn Path B ADDA on */
- path_adda_on(adapt, adda_reg, false, is2t);
-
- for (i = 0; i < retry_count; i++) {
- path_b_ok = phy_path_b_iqk(adapt);
- if (path_b_ok == 0x03) {
- result[t][4] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
- result[t][5] = (phy_query_bb_reg(adapt, rTx_Power_After_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
- result[t][6] = (phy_query_bb_reg(adapt, rRx_Power_Before_IQK_B_2,
- bMaskDWord)&0x3FF0000)>>16;
- result[t][7] = (phy_query_bb_reg(adapt, rRx_Power_After_IQK_B_2,
- bMaskDWord)&0x3FF0000)>>16;
- break;
- } else if (i == (retry_count - 1) && path_b_ok == 0x01) { /* Tx IQK OK */
- result[t][4] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
- result[t][5] = (phy_query_bb_reg(adapt, rTx_Power_After_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
- }
- }
-
- if (0x00 == path_b_ok) {
- ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
- ("Path B IQK failed!!\n"));
- }
- }
-
/* Back to BB mode, load original value */
phy_set_bb_reg(adapt, rFPGA0_IQK, bMaskDWord, 0);
@@ -1099,9 +1013,6 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
/* Restore RX initial gain */
phy_set_bb_reg(adapt, rFPGA0_XA_LSSIParameter,
bMaskDWord, 0x00032ed3);
- if (is2t)
- phy_set_bb_reg(adapt, rFPGA0_XB_LSSIParameter,
- bMaskDWord, 0x00032ed3);
/* load 0xe30 IQC default value */
phy_set_bb_reg(adapt, rTx_IQK_Tone_A, bMaskDWord, 0x01008c00);
@@ -1217,7 +1128,7 @@ void rtl88eu_phy_iq_calibrate(struct adapter *adapt, bool recovery)
is13simular = false;
for (i = 0; i < 3; i++) {
- phy_iq_calibrate(adapt, result, i, 0);
+ phy_iq_calibrate(adapt, result, i);
if (i == 1) {
is12simular = simularity_compare(adapt, result, 0, 1);
--
2.7.3
next prev parent reply other threads:[~2016-10-19 15:06 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-19 15:07 [PATCH 01/37] staging:r8188eu: remove get_rxmem function Ivan Safonov
2016-10-19 15:07 ` [PATCH 02/37] staging:r8188eu: remove device assignment after netdev_alloc_skb call Ivan Safonov
2016-10-19 16:53 ` Andy Shevchenko
2016-10-19 16:59 ` Andy Shevchenko
2016-10-20 12:16 ` Ivan Safonov
2016-10-25 8:51 ` Greg Kroah-Hartman
2016-10-20 8:46 ` Dan Carpenter
2016-10-19 15:07 ` [PATCH 03/37] staging:r8188eu: remove skb cloning after netdev_alloc_skb fail Ivan Safonov
2016-10-20 8:43 ` Dan Carpenter
2016-10-19 15:07 ` [PATCH 04/37] staging:r8188eu: remove WIFI_MP_* definitions and all corresponding code Ivan Safonov
2016-10-19 15:07 ` [PATCH 05/37] staging:r8188eu: remove mp_mode member of odm_dm_struct and odm_dm_struct structures Ivan Safonov
2016-10-19 15:07 ` [PATCH 06/37] staging:r8188eu: refactor rtl88eu_phy_iq_calibrate function Ivan Safonov
2016-10-19 15:07 ` Ivan Safonov [this message]
2016-10-19 15:07 ` [PATCH 08/37] staging:r8188eu: refactor path_adda_on function Ivan Safonov
2016-10-19 15:07 ` [PATCH 09/37] staging:r8188eu: remove is2t argument of phy_lc_calibrate function Ivan Safonov
2016-10-19 15:07 ` [PATCH 10/37] staging:r8188eu: remove type cast for first argument of memset Ivan Safonov
2016-10-19 15:07 ` [PATCH 11/37] staging:r8188eu: remove is_(multicast|broadcast)_mac_addr Ivan Safonov
2016-10-19 15:07 ` [PATCH 12/37] staging:r8188eu: remove ieee80211_get_hdrlen function Ivan Safonov
2016-10-19 15:07 ` [PATCH 13/37] staging:r8188eu: remove debug messages after memory allocation failed Ivan Safonov
2016-10-25 9:11 ` Dan Carpenter
2016-10-19 15:07 ` [PATCH 14/37] staging:r8188eu: remove ieee80211_is_empty_essid function Ivan Safonov
2016-10-19 15:07 ` [PATCH 15/37] staging:r8188eu: remove rx_head member of recv_frame structure Ivan Safonov
2016-10-19 15:07 ` [PATCH 16/37] staging:r8188eu: change recvframe_pull last argument type Ivan Safonov
2016-10-19 15:07 ` [PATCH 17/37] staging:r8188eu: update pkt->data synchronously with rx_data Ivan Safonov
2016-10-20 9:03 ` Dan Carpenter
2016-10-20 13:15 ` Ivan Safonov
2016-10-19 15:07 ` [PATCH 18/37] staging:r8188eu: remove rx_data member of recv_frame structure Ivan Safonov
2016-10-19 15:07 ` [PATCH 19/37] staging:r8188eu: remove rx_end " Ivan Safonov
2016-10-19 15:07 ` [PATCH 20/37] staging:r8188eu: change recvframe_put last argument type Ivan Safonov
2016-10-19 15:07 ` [PATCH 21/37] staging:r8188eu: change recvframe_pull_tail " Ivan Safonov
2016-10-19 15:07 ` [PATCH 22/37] staging:r8188eu: change recvframe_pull_tail type to void Ivan Safonov
2016-10-19 15:07 ` [PATCH 23/37] staging:r8188eu: update rx_tail and pkt->tail synchronously Ivan Safonov
2016-10-19 15:07 ` [PATCH 24/37] staging:r8188eu: remove rx_tail member of recv_frame structure Ivan Safonov
2016-10-19 15:07 ` [PATCH 25/37] staging:r8188eu: remove len " Ivan Safonov
2016-10-19 15:07 ` [PATCH 26/37] staging:r8188eu: remove recvframe_pull function Ivan Safonov
2016-10-19 15:07 ` [PATCH 27/37] staging:r8188eu: remove recvframe_put function Ivan Safonov
2016-10-19 15:07 ` [PATCH 28/37] staging:r8188eu: remove recvframe_pull_tail function Ivan Safonov
2016-10-19 15:07 ` [PATCH 29/37] staging:r8188eu: take out stripping of iv and icv space from wlanhdr_to_ethhdr function Ivan Safonov
2016-10-20 9:11 ` Dan Carpenter
2016-10-19 15:07 ` [PATCH 30/37] staging:r8188eu: remove eth_type member of rx_pkt_attrib structure Ivan Safonov
2016-10-19 15:07 ` [PATCH 31/37] staging:r8188eu: remove pscanned member of mlme_priv structure Ivan Safonov
2016-10-19 15:08 ` [PATCH 32/37] staging:r8188eu: remove SET_EARLYMODE_* definitions Ivan Safonov
2016-10-19 15:08 ` [PATCH 33/37] staging:r8188eu: remove rtw_calculate_wlan_pkt_size_by_attribue function Ivan Safonov
2016-10-19 15:08 ` [PATCH 34/37] staging:r8188eu: remove update_bcn member of mlme_priv structure Ivan Safonov
2016-10-19 15:08 ` [PATCH 35/37] staging:r8188eu: remove clr_fwstate* functions Ivan Safonov
2016-10-19 15:08 ` [PATCH 36/37] staging:r8188eu: remove unused structures from include/rtw_mlme.h Ivan Safonov
2016-10-19 15:08 ` [PATCH 37/37] staging:r8188eu: remove P2P_* enumerations Ivan Safonov
2016-10-20 9:18 ` [PATCH 01/37] staging:r8188eu: remove get_rxmem function Dan Carpenter
2016-10-20 13:56 ` Ivan Safonov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476889685-7367-7-git-send-email-insafonov@gmail.com \
--to=insafonov@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bhaktipriya96@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=geliangtang@163.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome