From: Willy Tarreau <w@1wt.eu>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Andrea Arcangeli <aarcange@redhat.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Vlastimil Babka <vbabka@suse.cz>, Jiri Slaby <jslaby@suse.cz>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Willy Tarreau <w@1wt.eu>
Subject: [PATCH 3.10 12/16] mm: thp: fix SMP race condition between THP page fault and MADV_DONTNEED
Date: Thu, 20 Oct 2016 00:49:36 +0200 [thread overview]
Message-ID: <1476917380-28311-13-git-send-email-w@1wt.eu> (raw)
In-Reply-To: <1476917380-28311-1-git-send-email-w@1wt.eu>
From: Andrea Arcangeli <aarcange@redhat.com>
commit ad33bb04b2a6cee6c1f99fabb15cddbf93ff0433 upstream.
pmd_trans_unstable()/pmd_none_or_trans_huge_or_clear_bad() were
introduced to locklessy (but atomically) detect when a pmd is a regular
(stable) pmd or when the pmd is unstable and can infinitely transition
from pmd_none() and pmd_trans_huge() from under us, while only holding
the mmap_sem for reading (for writing not).
While holding the mmap_sem only for reading, MADV_DONTNEED can run from
under us and so before we can assume the pmd to be a regular stable pmd
we need to compare it against pmd_none() and pmd_trans_huge() in an
atomic way, with pmd_trans_unstable(). The old pmd_trans_huge() left a
tiny window for a race.
Useful applications are unlikely to notice the difference as doing
MADV_DONTNEED concurrently with a page fault would lead to undefined
behavior.
[js] 3.12 backport: no pmd_devmap in 3.12 yet.
[akpm@linux-foundation.org: tidy up comment grammar/layout]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
mm/memory.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/mm/memory.c b/mm/memory.c
index 30bf9cc..10cdade 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3834,8 +3834,18 @@ retry:
if (unlikely(pmd_none(*pmd)) &&
unlikely(__pte_alloc(mm, vma, pmd, address)))
return VM_FAULT_OOM;
- /* if an huge pmd materialized from under us just retry later */
- if (unlikely(pmd_trans_huge(*pmd)))
+ /*
+ * If a huge pmd materialized under us just retry later. Use
+ * pmd_trans_unstable() instead of pmd_trans_huge() to ensure the pmd
+ * didn't become pmd_trans_huge under us and then back to pmd_none, as
+ * a result of MADV_DONTNEED running immediately after a huge pmd fault
+ * in a different thread of this mm, in turn leading to a misleading
+ * pmd_trans_huge() retval. All we have to ensure is that it is a
+ * regular pmd that we can walk with pte_offset_map() and we can do that
+ * through an atomic read in C, which is what pmd_trans_unstable()
+ * provides.
+ */
+ if (unlikely(pmd_trans_unstable(pmd)))
return 0;
/*
* A regular pmd is established and it can't morph into a huge pmd
--
2.8.0.rc2.1.gbe9624a
next prev parent reply other threads:[~2016-10-19 22:50 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-19 22:49 [PATCH 3.10 00/16] 3.10.104-stable review Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 01/16] Revert "powerpc/tm: Always reclaim in start_thread() for exec() class syscalls" Willy Tarreau
2016-10-20 3:07 ` Guenter Roeck
2016-10-20 6:12 ` Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 02/16] PCI: Support PCIe devices with short cfg_size Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 03/16] PCI: Add Netronome vendor and device IDs Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 04/16] PCI: Limit config space size for Netronome NFP6000 family Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 05/16] PCI: Add Netronome NFP4000 PF device ID Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 06/16] PCI: Limit config space size for Netronome NFP4000 Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 07/16] aacraid: Check size values after double-fetch from user Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 08/16] megaraid_sas: Fix probing cards without io port Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 09/16] crypto: nx - off by one bug in nx_of_update_msc() Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 10/16] staging: comedi: daqboard2000: bug fix board type matching code Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 11/16] ACPI / sysfs: fix error code in get_status() Willy Tarreau
2016-10-19 22:49 ` Willy Tarreau [this message]
2016-10-19 22:49 ` [PATCH 3.10 13/16] MIPS: KVM: Check for pfn noslot case Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 14/16] security: let security modules use PTRACE_MODE_* with bitmasks Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 15/16] xen-netback: ref count shared rings Willy Tarreau
2016-10-19 22:49 ` [PATCH 3.10 16/16] mm: remove gup_flags FOLL_WRITE games from __get_user_pages() Willy Tarreau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476917380-28311-13-git-send-email-w@1wt.eu \
--to=w@1wt.eu \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®