From: Mao Wenan <maowenan@huawei.com>
To: <jeffrey.t.kirsher@intel.com>, <intel-wired-lan@lists.osuosl.org>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH] add one parameter wro_enable for IXGBE
Date: Sat, 29 Oct 2016 15:08:52 +0800 [thread overview]
Message-ID: <1477724932-5440-2-git-send-email-maowenan@huawei.com> (raw)
In-Reply-To: <1477724932-5440-1-git-send-email-maowenan@huawei.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe.h | 1 +
drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 29 ++++++++++++++-----------
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 28 +++++++++++++-----------
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 9 ++++++++
4 files changed, 41 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index b06e32d..9bc0be5 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -1027,4 +1027,5 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
struct ixgbe_ring *tx_ring);
u32 ixgbe_rss_indir_tbl_entries(struct ixgbe_adapter *adapter);
void ixgbe_store_reta(struct ixgbe_adapter *adapter);
+bool ixgbe_wro_enable(void);
#endif /* _IXGBE_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index fb51be7..c312aaa 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -186,20 +186,23 @@ static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
ret_val = ixgbe_start_hw_generic(hw);
#ifndef CONFIG_SPARC
- /* Disable relaxed ordering */
- for (i = 0; ((i < hw->mac.max_tx_queues) &&
- (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
- regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
- IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
- }
+ if(likely(!ixgbe_wro_enable())) {
+
+ /* Disable relaxed ordering */
+ for (i = 0; ((i < hw->mac.max_tx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+ regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+ }
- for (i = 0; ((i < hw->mac.max_rx_queues) &&
- (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
- regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
- IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
- IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ for (i = 0; ((i < hw->mac.max_rx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+ IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
}
#endif
if (ret_val)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 77d3039..7115dc0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -347,22 +347,24 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
IXGBE_WRITE_FLUSH(hw);
#ifndef CONFIG_SPARC
- /* Disable relaxed ordering */
- for (i = 0; i < hw->mac.max_tx_queues; i++) {
- u32 regval;
-
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
- regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
- IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
- }
+ if(likely(!ixgbe_wro_enable())) {
+ /* Disable relaxed ordering */
+ for (i = 0; i < hw->mac.max_tx_queues; i++) {
+ u32 regval;
+
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+ regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+ }
- for (i = 0; i < hw->mac.max_rx_queues; i++) {
- u32 regval;
+ for (i = 0; i < hw->mac.max_rx_queues; i++) {
+ u32 regval;
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
- regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
- IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+ IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
}
#endif
return 0;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index a244d9a..79ebce3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -171,11 +171,20 @@ static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+static bool wro_enable = 0;
+module_param(wro_enable, bool, 0);
+MODULE_PARM_DESC(wro_enable, "enable 82599 TX and RX's WRO attribute");
+
MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+bool ixgbe_wro_enable(void)
+{
+ return wro_enable;
+}
+
static struct workqueue_struct *ixgbe_wq;
static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev);
--
2.5.0
next prev parent reply other threads:[~2016-10-29 7:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-29 7:08 [PATCH] add one parameter wro_enable to enable relaxed ordering " Mao Wenan
2016-10-29 7:08 ` Mao Wenan [this message]
2016-10-29 7:42 ` Jeff Kirsher
2016-11-09 9:43 ` 答复: " maowenan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477724932-5440-2-git-send-email-maowenan@huawei.com \
--to=maowenan@huawei.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®