From: Frank Li <Frank.Li@nxp.com>
To: <shawnguo@kernel.org>, <frank.li@nxp.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <peterz@infradead.org>,
<mingo@redhat.com>, <acme@kernel.org>,
<alexander.shishkin@linux.intel.com>, <lznuaa@gmail.com>,
<mark.rutland@arm.com>, Frank Li <Frank.Li@nxp.com>
Subject: [PATCH v2 1/2] ARM: imx: mmdc perf function support i.MX6QP
Date: Wed, 2 Nov 2016 13:00:03 -0500 [thread overview]
Message-ID: <1478109604-18323-1-git-send-email-Frank.Li@nxp.com> (raw)
i.MX6QP added new reigster bit PROFILE_SEL in MADPCR0.
need set it at perf start.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
V1 to V2: remove fsl_mmdc_devtype
arch/arm/mach-imx/mmdc.c | 38 ++++++++++++++++++++++++++++++++------
1 file changed, 32 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index d82d14c..032cbe0 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -44,6 +44,7 @@
#define DBG_RST 0x2
#define PRF_FRZ 0x4
#define CYC_OVF 0x8
+#define PROFILE_SEL 0x10
#define MMDC_MADPCR0 0x410
#define MMDC_MADPSR0 0x418
@@ -55,10 +56,29 @@
#define MMDC_NUM_COUNTERS 6
+#define FSL_MMDC_QUIRK_PROFILE_SEL 0x1
+
#define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu)
static int ddr_type;
+struct fsl_mmdc_devtype_data {
+ int driver_data;
+};
+
+static struct fsl_mmdc_devtype_data imx6q_data = {
+};
+
+static struct fsl_mmdc_devtype_data imx6qp_data = {
+ .driver_data = FSL_MMDC_QUIRK_PROFILE_SEL,
+};
+
+static const struct of_device_id imx_mmdc_dt_ids[] = {
+ { .compatible = "fsl,imx6q-mmdc", .data = (void *)&imx6q_data},
+ { .compatible = "fsl,imx6qp-mmdc", .data = (void *)&imx6qp_data},
+ { /* sentinel */ }
+};
+
#ifdef CONFIG_PERF_EVENTS
static DEFINE_IDA(mmdc_ida);
@@ -83,6 +103,7 @@ struct mmdc_pmu {
struct device *dev;
struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
struct hlist_node node;
+ struct fsl_mmdc_devtype_data *devtype_data;
};
/*
@@ -307,6 +328,7 @@ static void mmdc_pmu_event_start(struct perf_event *event, int flags)
struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
void __iomem *mmdc_base, *reg;
+ int val;
mmdc_base = pmu_mmdc->mmdc_base;
reg = mmdc_base + MMDC_MADPCR0;
@@ -321,7 +343,12 @@ static void mmdc_pmu_event_start(struct perf_event *event, int flags)
local64_set(&hwc->prev_count, 0);
writel(DBG_RST, reg);
- writel(DBG_EN, reg);
+
+ val = DBG_EN;
+ if (pmu_mmdc->devtype_data->driver_data & FSL_MMDC_QUIRK_PROFILE_SEL)
+ val |= PROFILE_SEL;
+
+ writel(val, reg);
}
static int mmdc_pmu_event_add(struct perf_event *event, int flags)
@@ -436,6 +463,8 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
char *name;
int mmdc_num;
int ret;
+ const struct of_device_id *of_id =
+ of_match_device(imx_mmdc_dt_ids, &pdev->dev);
pmu_mmdc = kzalloc(sizeof(*pmu_mmdc), GFP_KERNEL);
if (!pmu_mmdc) {
@@ -450,6 +479,8 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
name = devm_kasprintf(&pdev->dev,
GFP_KERNEL, "mmdc%d", mmdc_num);
+ pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
+
hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
pmu_mmdc->hrtimer.function = mmdc_pmu_timer_handler;
@@ -524,11 +555,6 @@ int imx_mmdc_get_ddr_type(void)
return ddr_type;
}
-static const struct of_device_id imx_mmdc_dt_ids[] = {
- { .compatible = "fsl,imx6q-mmdc", },
- { /* sentinel */ }
-};
-
static struct platform_driver imx_mmdc_driver = {
.driver = {
.name = "imx-mmdc",
--
2.5.2
next reply other threads:[~2016-11-02 18:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-02 18:00 Frank Li [this message]
2016-11-02 18:00 ` [PATCH V2 2/2] ARM: dts: add new compatible stream for i.MX6QP mmdc Frank Li
2016-11-05 7:43 ` Shawn Guo
2016-11-05 7:31 ` [PATCH v2 1/2] ARM: imx: mmdc perf function support i.MX6QP Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478109604-18323-1-git-send-email-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=acme@kernel.org \
--cc=alexander.shishkin@linux.intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lznuaa@gmail.com \
--cc=mark.rutland@arm.com \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®