From: Walt Feasel <waltfeasel@gmail.com>
To: arnaud.patard@rtp-net.org
Cc: gregkh@linuxfoundation.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, Walt Feasel <waltfeasel@gmail.com>
Subject: [PATCH] [STYLE 9/20]staging:xgifb:vb_setmode.c No space after cast
Date: Sun, 13 Nov 2016 22:48:50 -0500 [thread overview]
Message-ID: <1479095330-9869-1-git-send-email-waltfeasel@gmail.com> (raw)
Make suggested modification from checkpatch in reference
to CHECK: No space is necessary after a cast
Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
---
drivers/staging/xgifb/vb_setmode.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
index 59e8dc3..f07bbdb 100644
--- a/drivers/staging/xgifb/vb_setmode.c
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -4635,11 +4635,11 @@ static void XGI_SetLCDCap_A(unsigned short tempcx,
if (temp & LCDRGB18Bit) {
xgifb_reg_and_or(pVBInfo->Part1Port, 0x19, 0x0F,
/* Enable Dither */
- (unsigned short) (0x20 | (tempcx & 0x00C0)));
+ (unsigned short)(0x20 | (tempcx & 0x00C0)));
xgifb_reg_and_or(pVBInfo->Part1Port, 0x1A, 0x7F, 0x80);
} else {
xgifb_reg_and_or(pVBInfo->Part1Port, 0x19, 0x0F,
- (unsigned short) (0x30 | (tempcx & 0x00C0)));
+ (unsigned short)(0x30 | (tempcx & 0x00C0)));
xgifb_reg_and_or(pVBInfo->Part1Port, 0x1A, 0x7F, 0x00);
}
}
@@ -4655,11 +4655,11 @@ static void XGI_SetLCDCap_B(unsigned short tempcx,
{
if (tempcx & EnableLCD24bpp) /* 24bits */
xgifb_reg_and_or(pVBInfo->Part2Port, 0x1A, 0xE0,
- (unsigned short) (((tempcx & 0x00ff) >> 6)
+ (unsigned short)(((tempcx & 0x00ff) >> 6)
| 0x0c));
else
xgifb_reg_and_or(pVBInfo->Part2Port, 0x1A, 0xE0,
- (unsigned short) (((tempcx & 0x00ff) >> 6)
+ (unsigned short)(((tempcx & 0x00ff) >> 6)
| 0x18)); /* Enable Dither */
}
@@ -4718,12 +4718,12 @@ static void XGI_SetLCDCap(struct vb_device_info *pVBInfo)
(VB_SIS301LV | VB_SIS302LV | VB_XGI301C)) {
/* Set 301LV Capability */
xgifb_reg_set(pVBInfo->Part4Port, 0x24,
- (unsigned char) (tempcx & 0x1F));
+ (unsigned char)(tempcx & 0x1F));
}
/* VB Driving */
xgifb_reg_and_or(pVBInfo->Part4Port, 0x0D,
~((EnableVBCLKDRVLOW | EnablePLLSPLOW) >> 8),
- (unsigned short) ((tempcx & (EnableVBCLKDRVLOW
+ (unsigned short)((tempcx & (EnableVBCLKDRVLOW
| EnablePLLSPLOW)) >> 8));
if (pVBInfo->VBInfo & SetCRT2ToLCD)
@@ -4789,13 +4789,13 @@ static void XGI_SetPhaseIncr(struct vb_device_info *pVBInfo)
XGI_GetTVPtrIndex2(&tempbx, &tempcl, &tempch, pVBInfo); /* bx, cl, ch */
tempData = TVPhaseList[tempbx];
- xgifb_reg_set(pVBInfo->Part2Port, 0x31, (unsigned short) (tempData
+ xgifb_reg_set(pVBInfo->Part2Port, 0x31, (unsigned short)(tempData
& 0x000000FF));
- xgifb_reg_set(pVBInfo->Part2Port, 0x32, (unsigned short) ((tempData
+ xgifb_reg_set(pVBInfo->Part2Port, 0x32, (unsigned short)((tempData
& 0x0000FF00) >> 8));
- xgifb_reg_set(pVBInfo->Part2Port, 0x33, (unsigned short) ((tempData
+ xgifb_reg_set(pVBInfo->Part2Port, 0x33, (unsigned short)((tempData
& 0x00FF0000) >> 16));
- xgifb_reg_set(pVBInfo->Part2Port, 0x34, (unsigned short) ((tempData
+ xgifb_reg_set(pVBInfo->Part2Port, 0x34, (unsigned short)((tempData
& 0xFF000000) >> 24));
}
--
2.1.4
reply other threads:[~2016-11-14 3:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479095330-9869-1-git-send-email-waltfeasel@gmail.com \
--to=waltfeasel@gmail.com \
--cc=arnaud.patard@rtp-net.org \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome