From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
liodot@gmail.com, charrer@alacritech.com
Subject: [PATCH 6/6] staging: slicoss: avoid CamelCases slicoss.c
Date: Fri, 18 Nov 2016 18:58:10 +0100 [thread overview]
Message-ID: <1479491890-10380-7-git-send-email-sergio.paracuellos@gmail.com> (raw)
In-Reply-To: <1479491890-10380-1-git-send-email-sergio.paracuellos@gmail.com>
Replace CamelCases to comply with the standard kernel coding style.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
drivers/staging/slicoss/slicoss.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index e43a339..b2f8ad3 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -629,15 +629,15 @@ static void slic_mac_config(struct adapter *adapter)
static void slic_config_set(struct adapter *adapter, bool linkchange)
{
u32 value;
- u32 RcrReset;
+ u32 rcr_reset;
if (linkchange) {
/* Setup MAC */
slic_mac_config(adapter);
- RcrReset = GRCR_RESET;
+ rcr_reset = GRCR_RESET;
} else {
slic_mac_address_config(adapter);
- RcrReset = 0;
+ rcr_reset = 0;
}
if (adapter->linkduplex == LINK_FULLD) {
@@ -649,7 +649,7 @@ static void slic_config_set(struct adapter *adapter, bool linkchange)
slic_write32(adapter, SLIC_REG_WXCFG, value);
/* Setup rcvcfg last */
- value = (RcrReset | /* Reset, if linkchange */
+ value = (rcr_reset | /* Reset, if linkchange */
GRCR_CTLEN | /* Enable CTL frames */
GRCR_ADDRAEN | /* Address A enable */
GRCR_RCVBAD | /* Rcv bad frames */
@@ -662,7 +662,7 @@ static void slic_config_set(struct adapter *adapter, bool linkchange)
slic_write32(adapter, SLIC_REG_WXCFG, value);
/* Setup rcvcfg last */
- value = (RcrReset | /* Reset, if linkchange */
+ value = (rcr_reset | /* Reset, if linkchange */
GRCR_ADDRAEN | /* Address A enable */
GRCR_RCVBAD | /* Rcv bad frames */
(GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
@@ -2585,7 +2585,7 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
struct slic_shmemory *sm = &adapter->shmem;
struct slic_shmem_data *sm_data = sm->shmem_data;
struct slic_eeprom *peeprom;
- struct oslic_eeprom *pOeeprom;
+ struct oslic_eeprom *poeeprom;
dma_addr_t phys_config;
u32 phys_configh;
u32 phys_configl;
@@ -2681,14 +2681,14 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
/* Oasis card */
case SLIC_2GB_DEVICE_ID:
/* extract EEPROM data and pointers to EEPROM data */
- pOeeprom = (struct oslic_eeprom *)peeprom;
- eecodesize = pOeeprom->eecode_size;
- dramsize = pOeeprom->dram_size;
- pmac = pOeeprom->mac_info;
- fruformat = pOeeprom->fru_format;
- patkfru = &pOeeprom->atk_fru;
- oemfruformat = pOeeprom->oem_fru_format;
- poemfru = &pOeeprom->oem_fru;
+ poeeprom = (struct oslic_eeprom *)peeprom;
+ eecodesize = poeeprom->eecode_size;
+ dramsize = poeeprom->dram_size;
+ pmac = poeeprom->mac_info;
+ fruformat = poeeprom->fru_format;
+ patkfru = &poeeprom->atk_fru;
+ oemfruformat = poeeprom->oem_fru_format;
+ poemfru = &poeeprom->oem_fru;
macaddrs = 2;
/*
* Minor kludge for Oasis card
--
1.9.1
prev parent reply other threads:[~2016-11-18 17:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-18 17:58 [PATCH 0/6] staging: slicoss: fix some style issues Sergio Paracuellos
2016-11-18 17:58 ` [PATCH 1/6] staging: slicoss: avoid CamelCases in slic.h Sergio Paracuellos
2016-11-18 17:58 ` [PATCH 2/6] staging: slicoss: fix parenthesis alignment in slicoss.c Sergio Paracuellos
2016-11-18 17:58 ` [PATCH 3/6] staging: slicoss: logical continuations should be on the previous line Sergio Paracuellos
2016-11-18 17:58 ` [PATCH 4/6] staging: slicoss: braces should be used on all arms of this statement Sergio Paracuellos
2016-11-18 17:58 ` [PATCH 5/6] staging: slicoss: avoid CamelCases in slichw.h Sergio Paracuellos
2016-11-18 17:58 ` Sergio Paracuellos [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479491890-10380-7-git-send-email-sergio.paracuellos@gmail.com \
--to=sergio.paracuellos@gmail.com \
--cc=charrer@alacritech.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=liodot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®