From: Joel Holdsworth <joel@airwebreathe.org.uk>
To: atull@opensource.altera.com, moritz.fischer@ettus.com,
robh@kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
marex@denx.de
Cc: Joel Holdsworth <joel@airwebreathe.org.uk>
Subject: [PATCH v9 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
Date: Thu, 8 Dec 2016 22:35:48 -0700 [thread overview]
Message-ID: <1481261749-15301-2-git-send-email-joel@airwebreathe.org.uk> (raw)
In-Reply-To: <1481261749-15301-1-git-send-email-joel@airwebreathe.org.uk>
This adds documentation of the device tree bindings of the Lattice iCE40
FPGA driver for the FPGA manager framework.
Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Acked-by: Marek Vasut <marex@denx.de>
---
.../bindings/fpga/lattice-ice40-fpga-mgr.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
diff --git a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
new file mode 100644
index 0000000..7e7a78b
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
@@ -0,0 +1,21 @@
+Lattice iCE40 FPGA Manager
+
+Required properties:
+- compatible: Should contain "lattice,ice40-fpga-mgr"
+- reg: SPI chip select
+- spi-max-frequency: Maximum SPI frequency (>=1000000, <=25000000)
+- cdone-gpios: GPIO input connected to CDONE pin
+- reset-gpios: Active-low GPIO output connected to CRESET_B pin. Note
+ that unless the GPIO is held low during startup, the
+ FPGA will enter Master SPI mode and drive SCK with a
+ clock signal potentially jamming other devices on the
+ bus until the firmware is loaded.
+
+Example:
+ ice40: ice40@0 {
+ compatible = "lattice,ice40-fpga-mgr";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
--
2.7.4
next prev parent reply other threads:[~2016-12-09 5:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-09 5:35 [PATCH v9 1/3] of: Add vendor prefix for Lattice Semiconductor Joel Holdsworth
2016-12-09 5:35 ` Joel Holdsworth [this message]
2016-12-09 5:35 ` [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs Joel Holdsworth
2016-12-09 13:05 ` Marek Vasut
2016-12-09 15:50 ` Moritz Fischer
2016-12-14 15:40 ` Alan Tull
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481261749-15301-2-git-send-email-joel@airwebreathe.org.uk \
--to=joel@airwebreathe.org.uk \
--cc=atull@opensource.altera.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=marex@denx.de \
--cc=moritz.fischer@ettus.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®