Re: [PATCH 1/3] dt-bindings: Update QorIQ TMU thermal bindings

[Scott Wood <oss@buserror.net>]

On Wed, 2017-01-04 at 16:57 +0800, Jia Hongtao wrote:
> For different types of SoC the sensor id and endianness may vary.
> "#thermal-sensor-cells" is used to provide sensor id information.
> "little-endian" property is to tell the endianness of TMU.
> 
> Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>  Documentation/devicetree/bindings/thermal/qoriq-thermal.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> index 66223d5..20ca4ef 100644
> --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> @@ -17,6 +17,12 @@ Required properties:
>  	calibration data, as specified by the SoC reference manual.
>  	The first cell of each pair is the value to be written to TTCFGR,
>  	and the second is the value to be written to TSCFGR.
> +- #thermal-sensor-cells : Must be 1. The sensor specifier is the monitoring
> +	site ID, and represents the "n" in TRITSRn and TRATSRn.

I assume the driver will continue to work with existing device trees where
this information is absent?  If so, ACK for the whole series.

-Scott