From: Steve Longerbeam <slongerbeam@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
kernel@pengutronix.de, fabio.estevam@nxp.com,
linux@armlinux.org.uk, mchehab@kernel.org, hverkuil@xs4all.nl,
nick@shmanahar.org, markus.heiser@darmarIT.de,
p.zabel@pengutronix.de,
laurent.pinchart+renesas@ideasonboard.com, bparrot@ti.com,
geert@linux-m68k.org, arnd@arndb.de, sudipm.mukherjee@gmail.com,
minghsiu.tsai@mediatek.com, tiffany.lin@mediatek.com,
jean-christophe.trotin@st.com, horms+renesas@verge.net.au,
niklas.soderlund+renesas@ragnatech.se, robert.jarzmik@free.fr,
songjun.wu@microchip.com, andrew-ct.chen@mediatek.com,
gregkh@linuxfoundation.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org, devel@driverdev.osuosl.org,
Steve Longerbeam <steve_longerbeam@mentor.com>
Subject: [PATCH v3 03/24] ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections
Date: Fri, 6 Jan 2017 18:11:21 -0800 [thread overview]
Message-ID: <1483755102-24785-4-git-send-email-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <1483755102-24785-1-git-send-email-steve_longerbeam@mentor.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
This patch adds the device tree graph connecting the input multiplexers
to the IPU CSIs and the MIPI-CSI2 gasket on i.MX6. The MIPI_IPU
multiplexers are added as children of the iomuxc-gpr syscon device node.
On i.MX6Q/D two two-input multiplexers in front of IPU1 CSI0 and IPU2
CSI1 allow to select between CSI0/1 parallel input pads and the MIPI
CSI-2 virtual channels 0/3.
On i.MX6DL/S two five-input multiplexers in front of IPU1 CSI0 and IPU1
CSI1 allow to select between CSI0/1 parallel input pads and any of the
four MIPI CSI-2 virtual channels.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
--
- Removed some dangling/unused endpoints (ipu2_csi0_from_csi2ipu)
- Renamed the mipi virtual channel endpoint labels, from "mipi_csiX_..."
to "mipi_vcX...".
- Added input endpoint anchors to the video muxes for the connections
from parallel sensors.
- Added input endpoint anchors to the mipi_csi for the connections from
mipi csi-2 sensors.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
arch/arm/boot/dts/imx6dl.dtsi | 187 +++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx6q.dtsi | 123 +++++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl.dtsi | 10 ++-
3 files changed, 319 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 1ade195..0849e85 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -181,6 +181,193 @@
"di0", "di1";
};
+&gpr {
+ ipu1_csi0_mux: ipu1_csi0_mux@34 {
+ compatible = "video-multiplexer";
+ reg = <0x34>;
+ bit-mask = <0x7>;
+ bit-shift = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu1_csi0_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu1_csi0_mux_from_mipi_vc1: endpoint {
+ remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu1_csi0_mux_from_mipi_vc2: endpoint {
+ remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ ipu1_csi0_mux_from_mipi_vc3: endpoint {
+ remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ ipu1_csi0_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+
+ ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+ remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+ };
+ };
+ };
+
+ ipu1_csi1_mux: ipu1_csi1_mux@34 {
+ compatible = "video-multiplexer";
+ reg = <0x34>;
+ bit-mask = <0x7>;
+ bit-shift = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu1_csi1_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu1_csi1_mux_from_mipi_vc1: endpoint {
+ remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu1_csi1_mux_from_mipi_vc2: endpoint {
+ remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ ipu1_csi1_mux_from_mipi_vc3: endpoint {
+ remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ ipu1_csi1_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+
+ ipu1_csi1_mux_to_ipu1_csi1: endpoint {
+ remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>;
+ };
+ };
+ };
+};
+
+&ipu1_csi1 {
+ ipu1_csi1_from_ipu1_csi1_mux: endpoint {
+ remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
+ };
+};
+
+&mipi_csi {
+ port@0 {
+ reg = <0>;
+
+ mipi_csi_from_mipi_sensor: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc0_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+ };
+
+ mipi_vc0_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc1_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
+ };
+
+ mipi_vc1_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc2_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
+ };
+
+ mipi_vc2_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc3_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
+ };
+
+ mipi_vc3_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
+ };
+ };
+};
+
&vpu {
compatible = "fsl,imx6dl-vpu", "cnm,coda960";
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index e9a5d0b..9b2ca32 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -143,10 +143,18 @@
ipu2_csi0: port@0 {
reg = <0>;
+
+ ipu2_csi0_from_mipi_vc2: endpoint {
+ remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
+ };
};
ipu2_csi1: port@1 {
reg = <1>;
+
+ ipu2_csi1_from_ipu2_csi1_mux: endpoint {
+ remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
+ };
};
ipu2_di0: port@2 {
@@ -266,6 +274,80 @@
};
};
+&gpr {
+ ipu1_csi0_mux: ipu1_csi0_mux@4 {
+ compatible = "video-multiplexer";
+ reg = <0x04>;
+ bit-mask = <1>;
+ bit-shift = <19>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu1_csi0_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu1_csi0_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+ remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+ };
+ };
+ };
+
+ ipu2_csi1_mux: ipu2_csi1_mux@4 {
+ compatible = "video-multiplexer";
+ reg = <0x04>;
+ bit-mask = <1>;
+ bit-shift = <20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu2_csi1_mux_from_mipi_vc3: endpoint {
+ remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu2_csi1_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu2_csi1_mux_to_ipu2_csi1: endpoint {
+ remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
+ };
+ };
+ };
+};
+
+&ipu1_csi1 {
+ ipu1_csi1_from_mipi_vc1: endpoint {
+ remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
+ };
+};
+
&ldb {
clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
<&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
@@ -312,6 +394,47 @@
};
};
+&mipi_csi {
+ port@0 {
+ reg = <0>;
+
+ mipi_csi_from_mipi_sensor: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_vc0_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ mipi_vc1_to_ipu1_csi1: endpoint {
+ remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ mipi_vc2_to_ipu2_csi0: endpoint {
+ remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ mipi_vc3_to_ipu2_csi1_mux: endpoint {
+ remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
+ };
+ };
+};
+
&mipi_dsi {
ports {
port@2 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 42926e9..010388c 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -799,8 +799,10 @@
};
gpr: iomuxc-gpr@020e0000 {
- compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+ compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
reg = <0x020e0000 0x38>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
iomuxc: iomuxc@020e0000 {
@@ -1127,6 +1129,8 @@
mipi_csi: mipi@021dc000 {
compatible = "fsl,imx6-mipi-csi2";
reg = <0x021dc000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 100 0x04>, <0 101 0x04>;
clocks = <&clks IMX6QDL_CLK_HSI_TX>,
<&clks IMX6QDL_CLK_VIDEO_27M>,
@@ -1232,6 +1236,10 @@
ipu1_csi0: port@0 {
reg = <0>;
+
+ ipu1_csi0_from_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>;
+ };
};
ipu1_csi1: port@1 {
--
2.7.4
next prev parent reply other threads:[~2017-01-07 2:19 UTC|newest]
Thread overview: 185+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-07 2:11 [PATCH v3 00/24] i.MX Media Driver Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 01/24] [media] dt-bindings: Add bindings for i.MX media driver Steve Longerbeam
2017-01-13 11:55 ` Philipp Zabel
2017-01-13 19:03 ` Steve Longerbeam
2017-01-16 12:09 ` Philipp Zabel
2017-01-16 17:13 ` Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 02/24] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node Steve Longerbeam
2017-01-13 11:57 ` Philipp Zabel
2017-01-13 22:40 ` Steve Longerbeam
2017-01-07 2:11 ` Steve Longerbeam [this message]
2017-01-07 2:11 ` [PATCH v3 04/24] ARM: dts: imx6qdl: add media device Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 05/24] ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround Steve Longerbeam
2017-01-13 11:59 ` Philipp Zabel
2017-01-07 2:11 ` [PATCH v3 06/24] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Steve Longerbeam
2017-01-13 12:03 ` Philipp Zabel
2017-01-13 23:04 ` Steve Longerbeam
2017-01-16 12:55 ` Philipp Zabel
2017-01-16 17:15 ` Steve Longerbeam
2017-02-05 15:17 ` Laurent Pinchart
2017-01-30 22:28 ` Russell King - ARM Linux
2017-01-30 22:51 ` Russell King - ARM Linux
2017-02-05 15:24 ` Laurent Pinchart
2017-02-05 15:37 ` Russell King - ARM Linux
2017-01-07 2:11 ` [PATCH v3 07/24] ARM: dts: imx6-sabresd: " Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 08/24] ARM: dts: imx6-sabreauto: create i2cmux for i2c3 Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 09/24] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 10/24] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Steve Longerbeam
2017-01-12 19:37 ` Tim Harvey
2017-01-12 23:40 ` Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 11/24] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 12/24] add mux and video interface bridge entity functions Steve Longerbeam
2017-01-20 13:56 ` Hans Verkuil
2017-02-05 15:36 ` Laurent Pinchart
2017-02-06 10:27 ` Philipp Zabel
2017-01-07 2:11 ` [PATCH v3 13/24] platform: add video-multiplexer subdevice driver Steve Longerbeam
2017-01-10 5:35 ` Rob Herring
2017-01-20 14:03 ` Hans Verkuil
2017-01-24 12:02 ` Philipp Zabel
2017-01-25 2:07 ` Steve Longerbeam
2017-02-05 15:48 ` Laurent Pinchart
2017-02-06 9:50 ` Hans Verkuil
2017-02-06 22:33 ` Laurent Pinchart
2017-02-06 23:10 ` Steve Longerbeam
2017-02-07 10:26 ` Laurent Pinchart
2017-02-07 10:41 ` Philipp Zabel
2017-02-07 14:11 ` Laurent Pinchart
2017-02-07 13:36 ` Benoit Parrot
2017-02-07 20:50 ` Sakari Ailus
2017-02-07 23:04 ` Laurent Pinchart
2017-01-24 12:44 ` Javier Martinez Canillas
2017-01-26 1:22 ` Steve Longerbeam
2017-02-07 20:46 ` Sakari Ailus
2017-02-08 9:47 ` Philipp Zabel
2017-02-08 10:05 ` Laurent Pinchart
2017-01-07 2:11 ` [PATCH v3 14/24] UAPI: Add media UAPI Kbuild file Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 15/24] media: Add userspace header file for i.MX Steve Longerbeam
2017-01-13 12:05 ` Philipp Zabel
2017-01-13 23:13 ` Steve Longerbeam
2017-02-05 15:50 ` Laurent Pinchart
2017-01-07 2:11 ` [PATCH v3 16/24] media: Add i.MX media core driver Steve Longerbeam
2017-01-13 15:20 ` Philipp Zabel
2017-01-14 22:46 ` Steve Longerbeam
2017-01-16 13:47 ` Philipp Zabel
2017-01-23 2:31 ` Steve Longerbeam
2017-01-23 11:13 ` Philipp Zabel
2017-01-24 1:38 ` Steve Longerbeam
2017-01-24 1:45 ` Steve Longerbeam
2017-01-24 11:37 ` Philipp Zabel
2017-01-30 15:28 ` Russell King - ARM Linux
[not found] ` <2b1d2418-1ad4-6373-cb07-c3aeab48187f@gmail.com>
2017-01-19 1:44 ` Steve Longerbeam
2017-01-24 11:39 ` Philipp Zabel
2017-01-30 22:29 ` Russell King - ARM Linux
2017-02-02 22:44 ` Russell King - ARM Linux
2017-02-02 22:50 ` Russell King - ARM Linux
2017-02-07 1:54 ` Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 17/24] media: imx: Add CSI subdev driver Steve Longerbeam
2017-01-16 15:03 ` Philipp Zabel
2017-01-16 21:15 ` Steve Longerbeam
2017-01-30 22:29 ` Russell King - ARM Linux
2017-01-31 10:30 ` Russell King - ARM Linux
2017-01-31 11:20 ` Russell King - ARM Linux
2017-02-01 0:31 ` Steve Longerbeam
2017-02-01 0:58 ` Russell King - ARM Linux
2017-01-31 15:51 ` Philipp Zabel
2017-01-31 16:48 ` Philipp Zabel
2017-02-01 1:40 ` Steve Longerbeam
2017-02-07 16:18 ` [PATCH] media: imx: csi: fix crop rectangle reset in sink set_fmt Philipp Zabel
2017-01-07 2:11 ` [PATCH v3 18/24] media: imx: Add SMFC subdev driver Steve Longerbeam
2017-02-01 18:39 ` Russell King - ARM Linux
2017-02-01 18:52 ` Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 19/24] media: imx: Add IC subdev drivers Steve Longerbeam
2017-01-20 14:29 ` Hans Verkuil
2017-01-25 2:39 ` Steve Longerbeam
2017-01-30 22:29 ` Russell King - ARM Linux
2017-01-07 2:11 ` [PATCH v3 20/24] media: imx: Add Camera Interface subdev driver Steve Longerbeam
2017-01-20 14:38 ` Hans Verkuil
2017-01-24 2:15 ` Steve Longerbeam
2017-01-31 13:42 ` Russell King - ARM Linux
2017-01-31 18:21 ` Steve Longerbeam
2017-01-31 20:33 ` Russell King - ARM Linux
2017-01-31 21:55 ` Ian Arkver
2017-01-31 22:04 ` Russell King - ARM Linux
2017-01-31 22:33 ` Ian Arkver
2017-01-31 22:36 ` Steve Longerbeam
2017-01-31 23:30 ` Russell King - ARM Linux
2017-01-31 23:41 ` Steve Longerbeam
2017-02-02 22:35 ` Russell King - ARM Linux
2017-02-07 1:52 ` Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver " Steve Longerbeam
2017-01-30 22:30 ` Russell King - ARM Linux
2017-01-31 0:01 ` Russell King - ARM Linux
2017-01-31 9:49 ` Philipp Zabel
2017-02-01 1:02 ` Steve Longerbeam
2017-02-01 1:13 ` Russell King - ARM Linux
2017-01-31 0:31 ` Russell King - ARM Linux
2017-01-31 2:11 ` Steve Longerbeam
2017-02-01 23:44 ` Russell King - ARM Linux
2017-02-02 0:04 ` Steve Longerbeam
2017-02-02 11:50 ` Philipp Zabel
2017-02-08 23:23 ` Steve Longerbeam
2017-02-08 23:42 ` Russell King - ARM Linux
2017-02-09 23:49 ` Steve Longerbeam
2017-02-09 23:51 ` Steve Longerbeam
2017-02-13 9:20 ` Philipp Zabel
2017-02-13 23:20 ` Steve Longerbeam
2017-02-14 16:59 ` Philipp Zabel
2017-02-09 9:43 ` Philipp Zabel
2017-01-07 2:11 ` [PATCH v3 22/24] media: imx: Add MIPI CSI-2 OV5640 sensor " Steve Longerbeam
2017-01-20 14:48 ` Hans Verkuil
2017-01-25 19:10 ` Steve Longerbeam
2017-01-30 23:29 ` Russell King - ARM Linux
2017-01-31 3:31 ` Steve Longerbeam
2017-02-02 10:36 ` Laurent Pinchart
2017-02-12 22:53 ` Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 23/24] media: imx: Add Parallel OV5642 " Steve Longerbeam
2017-01-07 2:11 ` [PATCH v3 24/24] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Steve Longerbeam
2017-01-11 23:14 ` [PATCH v3 00/24] i.MX Media Driver Tim Harvey
2017-01-12 3:22 ` Steve Longerbeam
2017-01-20 13:52 ` Hans Verkuil
2017-01-20 16:31 ` Philipp Zabel
2017-01-20 18:40 ` Steve Longerbeam
2017-01-20 20:39 ` Hans Verkuil
2017-01-23 11:00 ` Philipp Zabel
2017-01-23 11:08 ` Hans Verkuil
2017-01-24 11:28 ` Philipp Zabel
2017-01-23 23:08 ` Steve Longerbeam
2017-01-24 11:27 ` Philipp Zabel
2017-01-28 19:27 ` Steve Longerbeam
2017-01-30 13:06 ` Russell King - ARM Linux
2017-01-31 10:09 ` Philipp Zabel
2017-01-31 13:14 ` Russell King - ARM Linux
2017-01-31 13:35 ` Philipp Zabel
2017-01-31 14:04 ` Russell King - ARM Linux
2017-01-31 0:45 ` Russell King - ARM Linux
2017-01-31 1:06 ` Russell King - ARM Linux
2017-01-31 2:06 ` Steve Longerbeam
2017-01-31 1:22 ` Steve Longerbeam
2017-01-31 9:49 ` Philipp Zabel
2017-01-31 10:21 ` Russell King - ARM Linux
2017-01-31 11:00 ` Russell King - ARM Linux
2017-01-31 23:43 ` Steve Longerbeam
2017-02-01 0:23 ` Russell King - ARM Linux
2017-02-01 1:54 ` Steve Longerbeam
2017-02-01 9:20 ` Russell King - ARM Linux
2017-01-31 13:54 ` Philipp Zabel
2017-01-31 14:25 ` Philipp Zabel
2017-01-31 15:03 ` Russell King - ARM Linux
2017-02-01 1:26 ` Steve Longerbeam
2017-02-01 9:30 ` Philipp Zabel
2017-02-01 10:11 ` Russell King - ARM Linux
2017-02-01 10:42 ` Philipp Zabel
2017-02-01 10:53 ` Russell King - ARM Linux
2017-02-02 0:19 ` Steve Longerbeam
2017-02-03 14:41 ` Laurent Pinchart
2017-02-03 17:56 ` Steve Longerbeam
2017-02-15 2:27 ` Steve Longerbeam
2017-02-15 9:33 ` Philipp Zabel
2017-02-02 17:22 ` Russell King - ARM Linux
2017-02-02 17:31 ` Steve Longerbeam
2017-02-02 17:56 ` Russell King - ARM Linux
2017-02-02 18:26 ` Steve Longerbeam
2017-02-02 18:58 ` Russell King - ARM Linux
2017-02-02 19:12 ` Steve Longerbeam
2017-02-02 22:29 ` Russell King - ARM Linux
2017-02-03 18:49 ` Steve Longerbeam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1483755102-24785-4-git-send-email-steve_longerbeam@mentor.com \
--to=slongerbeam@gmail.com \
--cc=andrew-ct.chen@mediatek.com \
--cc=arnd@arndb.de \
--cc=bparrot@ti.com \
--cc=devel@driverdev.osuosl.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=horms+renesas@verge.net.au \
--cc=hverkuil@xs4all.nl \
--cc=jean-christophe.trotin@st.com \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=markus.heiser@darmarIT.de \
--cc=mchehab@kernel.org \
--cc=minghsiu.tsai@mediatek.com \
--cc=nick@shmanahar.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=p.zabel@pengutronix.de \
--cc=robert.jarzmik@free.fr \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=songjun.wu@microchip.com \
--cc=steve_longerbeam@mentor.com \
--cc=sudipm.mukherjee@gmail.com \
--cc=tiffany.lin@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®