From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] reset: uniphier: add compatible string for LD11 SD-reset block
Date: Sun, 15 Jan 2017 04:04:46 +0900 [thread overview]
Message-ID: <1484420686-28911-1-git-send-email-yamada.masahiro@socionext.com> (raw)
The LD11 SoC is equipped with not only MIO-reset but also SD-reset
for controlling RST_n pin of the eMMC device.
Update the binding document and remove unneeded "." from each line
in itemization.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
.../devicetree/bindings/reset/uniphier-reset.txt | 47 +++++++++++-----------
drivers/reset/reset-uniphier.c | 4 ++
2 files changed, 28 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 5020524..83ab0f5 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -6,14 +6,14 @@ System reset
Required properties:
- compatible: should be one of the following:
- "socionext,uniphier-sld3-reset" - for sLD3 SoC.
- "socionext,uniphier-ld4-reset" - for LD4 SoC.
- "socionext,uniphier-pro4-reset" - for Pro4 SoC.
- "socionext,uniphier-sld8-reset" - for sLD8 SoC.
- "socionext,uniphier-pro5-reset" - for Pro5 SoC.
- "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
- "socionext,uniphier-ld11-reset" - for LD11 SoC.
- "socionext,uniphier-ld20-reset" - for LD20 SoC.
+ "socionext,uniphier-sld3-reset" - for sLD3 SoC
+ "socionext,uniphier-ld4-reset" - for LD4 SoC
+ "socionext,uniphier-pro4-reset" - for Pro4 SoC
+ "socionext,uniphier-sld8-reset" - for sLD8 SoC
+ "socionext,uniphier-pro5-reset" - for Pro5 SoC
+ "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
+ "socionext,uniphier-ld11-reset" - for LD11 SoC
+ "socionext,uniphier-ld20-reset" - for LD20 SoC
- #reset-cells: should be 1.
Example:
@@ -37,14 +37,15 @@ Media I/O (MIO) reset, SD reset
Required properties:
- compatible: should be one of the following:
- "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
- "socionext,uniphier-ld4-mio-reset" - for LD4 SoC.
- "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
- "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
- "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC.
- "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC.
- "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
- "socionext,uniphier-ld20-sd-reset" - for LD20 SoC.
+ "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC
+ "socionext,uniphier-ld4-mio-reset" - for LD4 SoC
+ "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC
+ "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC
+ "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC
+ "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC
+ "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
+ "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD)
+ "socionext,uniphier-ld20-sd-reset" - for LD20 SoC
- #reset-cells: should be 1.
Example:
@@ -68,13 +69,13 @@ Peripheral reset
Required properties:
- compatible: should be one of the following:
- "socionext,uniphier-ld4-peri-reset" - for LD4 SoC.
- "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
- "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
- "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
- "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
- "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
- "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
+ "socionext,uniphier-ld4-peri-reset" - for LD4 SoC
+ "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC
+ "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC
+ "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC
+ "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
+ "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
+ "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
- #reset-cells: should be 1.
Example:
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 968c3ae..9c11be3 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -390,6 +390,10 @@ static const struct of_device_id uniphier_reset_match[] = {
.data = uniphier_sld3_mio_reset_data,
},
{
+ .compatible = "socionext,uniphier-ld11-sd-reset",
+ .data = uniphier_pro5_sd_reset_data,
+ },
+ {
.compatible = "socionext,uniphier-ld20-sd-reset",
.data = uniphier_pro5_sd_reset_data,
},
--
2.7.4
next reply other threads:[~2017-01-14 19:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-14 19:04 Masahiro Yamada [this message]
2017-01-17 10:07 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484420686-28911-1-git-send-email-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®