From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751022AbdAQJYt (ORCPT ); Tue, 17 Jan 2017 04:24:49 -0500 Received: from mailgw02.mediatek.com ([210.61.82.184]:8614 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1750917AbdAQJYr (ORCPT ); Tue, 17 Jan 2017 04:24:47 -0500 From: Erin Lo To: Matthias Brugger CC: , , , , Subject: [PATCH v3] Add some DT nodes for Mediatek MT2701 Date: Tue, 17 Jan 2017 17:24:08 +0800 Message-ID: <1484645049-4477-1-git-send-email-erin.lo@mediatek.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch series based on v4.10-rc2, include MT2701 spi/nand/auxadc/thermal controller DT nodes. Dependent on "Add clock and power domain DT nodes for Mediatek MT2701"[1]. Change in v3: 1. Since some patches in v2 have been applied to v4.10-next/dts32, they were not included in v3 series. 2. Remove iommu DT nodes since it will be sent with its driver patch series later. 3. Remove ethernet DT nodes since it will be sent with its driver patch series later. 4. Modify thermal resets pin define from hard code to name. Change in v2: 1. Add spi/auxadc pin setting 2. Add ethernet node and pin setting 3. Add thermal controller node [1] http://lists.infradead.org/pipermail/linux-mediatek/2016-December/007637.html Dawei Chien (1): arm: dts: mt2701: Add thermal device node. arch/arm/boot/dts/mt2701.dtsi | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) -- 1.9.1