From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751380AbdAQMbt (ORCPT ); Tue, 17 Jan 2017 07:31:49 -0500 Received: from mail-wm0-f43.google.com ([74.125.82.43]:37514 "EHLO mail-wm0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750938AbdAQMbq (ORCPT ); Tue, 17 Jan 2017 07:31:46 -0500 From: Neil Armstrong To: dri-devel@lists.freedesktop.org, laurent.pinchart+renesas@ideasonboard.com Cc: Neil Armstrong , Jose.Abreu@synopsys.com, kieran.bingham@ideasonboard.com, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [RFC/RFT PATCH 0/4] drm/bridge: dw-hdmi: Add support for Custom PHYs Date: Tue, 17 Jan 2017 13:31:30 +0100 Message-Id: <1484656294-6140-1-git-send-email-narmstrong@baylibre.com> X-Mailer: git-send-email 1.9.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The Amlogic GX SoCs implements a Synopsys DesignWare HDMI TX Controller in combination with a very custom PHY. Thanks to Laurent Pinchart's changes, the HW report the following : Detected HDMI TX controller v2.01a with HDCP (Vendor PHY) The following differs from common PHY integration as managed in the current driver : - Amlogic PHY is not configured through the internal I2C link - Amlogic PHY do not use the ENTMDS, SVSRET, PDDQ, ... signals from the controller - Amlogic PHY do not export HPD ands RxSense signals to the controller And finally, concerning the controller integration : - the Controller registers are not flat memory-mapped, and uses an addr+read/write register pair to write all registers. - Inputs only YUV444 pixel data This is why the following patchset implements : - Conversion to regmap for register access - Add more callbacks ops to handle Custom PHYs - Configure the Input format from the plat_data - Fixes a bug that considers the input to be always RBG and sends bad pixel format to a DVI sink by disabling CSC This patchset makes the Amlogix GX SoCs HDMI output successfully work, but I do not have access to Renesas, i.MX or RockChip SoCs to test against potentiel regressions, like the regmap conversion. This patchset is based on the latest Laurent Pinchart dw-hdmi serie at [1]. [1] http://lkml.kernel.org/r/20170117082910.27023-1-laurent.pinchart+renesas@ideasonboard.com Neil Armstrong (4): drm/bridge: dw-hdmi: Switch to regmap for register access drm/bridge: dw-hdmi: Add support for custom PHY handling drm/bridge: dw-hdmi: Enable CSC even for DVI drm/bridge: dw-hdmi: Take input format from plat_data drivers/gpu/drm/bridge/dw-hdmi.c | 194 +++++++++++++++++++++++++-------------- include/drm/bridge/dw_hdmi.h | 18 ++++ 2 files changed, 143 insertions(+), 69 deletions(-) -- 1.9.1