Re: [PATCH 2/2] acpi-dma: Add support for "dma-names" device property

["Rafael J. Wysocki" <rjw@rjwysocki.net>]

On Thursday, September 24, 2015 09:05:28 PM Vinod Koul wrote:
> On Mon, Sep 14, 2015 at 05:37:36PM +0300, Mika Westerberg wrote:
> > The current implementation hard codes the two supported channels so that
> > "tx" is always 0 and "rx" is always 1. This is because there has been no
> > suitable way in ACPI to name resources.
> > 
> > With _DSD device properties we can finally do this:
> > 
> > 	Device (SPI1) {
> > 	    Name (_CRS, ResourceTemplate () {
> > 	        ...
> > 	        FixedDMA (0x0000, 0x0000, Width32bit)
> > 	        FixedDMA (0x0001, 0x0001, Width32bit)
> > 	    })
> > 
> > 	    Name (_DSD, Package () {
> > 	        ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> > 	        Package () {
> > 	            Package () {"dma-names", Package () {"tx", "rx"}}
> > 	        },
> > 	    })
> > 	}
> > 
> > The names "tx" and "rx" now provide index of the FixedDMA resource in
> > question.
> > 
> > Modify acpi_dma_request_slave_chan_by_name() so that it looks for
> > "dma-names" property first and only then fall back using hardcoded indices.
> > 
> > The DT "dma-names" binding that we reuse for ACPI is documented in
> > Documentation/devicetree/bindings/dma/dma.txt.
> 
> Acked-by: Vinod Koul <vinod.koul@intel.com>
> 
> This is actually good and will help a lot.

Thanks!

Added [1/2] and this one to my device-properties branch.

Thanks,
Rafael