From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752387AbdA3KFH (ORCPT ); Mon, 30 Jan 2017 05:05:07 -0500 Received: from mail-wm0-f49.google.com ([74.125.82.49]:37718 "EHLO mail-wm0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751017AbdA3KCZ (ORCPT ); Mon, 30 Jan 2017 05:02:25 -0500 From: Bartosz Golaszewski To: Kevin Hilman , Sekhar Nori , Patrick Titiano , Michael Turquette , Tejun Heo , Rob Herring , Mark Rutland , Russell King , David Lechner Cc: linux-ide@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Bartosz Golaszewski Subject: [PATCH v7 04/14] sata: ahci-da850: get the sata clock using a connection id Date: Mon, 30 Jan 2017 11:02:01 +0100 Message-Id: <1485770531-6772-5-git-send-email-bgolaszewski@baylibre.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1485770531-6772-1-git-send-email-bgolaszewski@baylibre.com> References: <1485770531-6772-1-git-send-email-bgolaszewski@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org In preparation for using two clocks in the driver (the sysclk2-based clock and the external REFCLK), check if we got the functional clock after calling ahci_platform_get_resources(). If not, retry calling clk_get() with con_id specified. Signed-off-by: Bartosz Golaszewski Acked-by: Tejun Heo --- drivers/ata/ahci_da850.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c index 267a3d3..e397bab 100644 --- a/drivers/ata/ahci_da850.c +++ b/drivers/ata/ahci_da850.c @@ -71,12 +71,28 @@ static int ahci_da850_probe(struct platform_device *pdev) struct ahci_host_priv *hpriv; struct resource *res; void __iomem *pwrdn_reg; + struct clk *clk; int rc; hpriv = ahci_platform_get_resources(pdev); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); + /* + * Internally ahci_platform_get_resources() calls clk_get(dev, NULL) + * when trying to obtain the functional clock. This SATA controller + * uses two clocks for which we specify two connection ids. If we don't + * have the functional clock at this point - call clk_get() again with + * con_id = "fck". + */ + if (!hpriv->clks[0]) { + clk = clk_get(dev, "fck"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + hpriv->clks[0] = clk; + } + rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; -- 2.9.3