From mboxrd@z Thu Jan 1 00:00:00 1970 Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753713AbdBETYl (ORCPT + 2 others); Sun, 5 Feb 2017 14:24:41 -0500 Received: from wtarreau.pck.nerim.net ([62.212.114.60]:27878 "EHLO 1wt.eu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753660AbdBETYg (ORCPT ); Sun, 5 Feb 2017 14:24:36 -0500 From: Willy Tarreau To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux@roeck-us.net Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , Willy Tarreau Subject: [PATCH 3.10 299/319] cx231xx: fix GPIOs for Pixelview SBTVD hybrid Date: Sun, 5 Feb 2017 20:22:01 +0100 Message-Id: <1486322541-8206-200-git-send-email-w@1wt.eu> X-Mailer: git-send-email 2.8.0.rc2.1.gbe9624a In-Reply-To: <1486322541-8206-1-git-send-email-w@1wt.eu> References: <1486322541-8206-1-git-send-email-w@1wt.eu> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Return-Path: From: Mauro Carvalho Chehab commit 24b923f073ac37eb744f56a2c7f77107b8219ab2 upstream. This device uses GPIOs: 28 to switch between analog and digital modes: on digital mode, it should be set to 1. The code that sets it on analog mode is OK, but it misses the logic that sets it on digital mode. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Willy Tarreau --- drivers/media/usb/cx231xx/cx231xx-cards.c | 2 +- drivers/media/usb/cx231xx/cx231xx-core.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index 13249e5..c13c323 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -452,7 +452,7 @@ struct cx231xx_board cx231xx_boards[] = { .output_mode = OUT_MODE_VIP11, .demod_xfer_mode = 0, .ctl_pin_status_mask = 0xFFFFFFC4, - .agc_analog_digital_select_gpio = 0x00, /* According with PV cxPolaris.inf file */ + .agc_analog_digital_select_gpio = 0x1c, .tuner_sif_gpio = -1, .tuner_scl_gpio = -1, .tuner_sda_gpio = -1, diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c index 4ba3ce0..6f5ffcc 100644 --- a/drivers/media/usb/cx231xx/cx231xx-core.c +++ b/drivers/media/usb/cx231xx/cx231xx-core.c @@ -723,6 +723,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode) break; case CX231XX_BOARD_CNXT_RDE_253S: case CX231XX_BOARD_CNXT_RDU_253S: + case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1); break; case CX231XX_BOARD_HAUPPAUGE_EXETER: @@ -747,7 +748,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode) case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: - errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0); + errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0); break; default: break; -- 2.8.0.rc2.1.gbe9624a