From mboxrd@z Thu Jan 1 00:00:00 1970 Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754263AbdBET54 (ORCPT + 2 others); Sun, 5 Feb 2017 14:57:56 -0500 Received: from wtarreau.pck.nerim.net ([62.212.114.60]:28096 "EHLO 1wt.eu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754063AbdBETZd (ORCPT ); Sun, 5 Feb 2017 14:25:33 -0500 From: Willy Tarreau To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux@roeck-us.net Cc: Steffen Maier , "Martin K . Petersen" , Willy Tarreau Subject: [PATCH 3.10 130/319] zfcp: fix fc_host port_type with NPIV Date: Sun, 5 Feb 2017 20:19:12 +0100 Message-Id: <1486322541-8206-31-git-send-email-w@1wt.eu> X-Mailer: git-send-email 2.8.0.rc2.1.gbe9624a In-Reply-To: <1486322541-8206-1-git-send-email-w@1wt.eu> References: <1486322541-8206-1-git-send-email-w@1wt.eu> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Return-Path: From: Steffen Maier commit bd77befa5bcff8c51613de271913639edf85fbc2 upstream. For an NPIV-enabled FCP device, zfcp can erroneously show "NPort (fabric via point-to-point)" instead of "NPIV VPORT" for the port_type sysfs attribute of the corresponding fc_host. s390-tools that can be affected are dbginfo.sh and ziomon. zfcp_fsf_exchange_config_evaluate() ignores fsf_qtcb_bottom_config.connection_features indicating NPIV and only sets fc_host_port_type to FC_PORTTYPE_NPORT if fsf_qtcb_bottom_config.fc_topology is FSF_TOPO_FABRIC. Only the independent zfcp_fsf_exchange_port_evaluate() evaluates connection_features to overwrite fc_host_port_type to FC_PORTTYPE_NPIV in case of NPIV. Code was introduced with upstream kernel 2.6.30 commit 0282985da5923fa6365adcc1a1586ae0c13c1617 ("[SCSI] zfcp: Report fc_host_port_type as NPIV"). This works during FCP device recovery (such as set online) because it performs FSF_QTCB_EXCHANGE_CONFIG_DATA followed by FSF_QTCB_EXCHANGE_PORT_DATA in sequence. However, the zfcp-specific scsi host sysfs attributes "requests", "megabytes", or "seconds_active" trigger only zfcp_fsf_exchange_config_evaluate() resetting fc_host port_type to FC_PORTTYPE_NPORT despite NPIV. The zfcp-specific scsi host sysfs attribute "utilization" triggers only zfcp_fsf_exchange_port_evaluate() correcting the fc_host port_type again in case of NPIV. Evaluate fsf_qtcb_bottom_config.connection_features in zfcp_fsf_exchange_config_evaluate() where it belongs to. Signed-off-by: Steffen Maier Fixes: 0282985da592 ("[SCSI] zfcp: Report fc_host_port_type as NPIV") Reviewed-by: Benjamin Block Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Willy Tarreau --- drivers/s390/scsi/zfcp_fsf.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 9152999..8fa6bc4 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -3,7 +3,7 @@ * * Implementation of FSF commands. * - * Copyright IBM Corp. 2002, 2013 + * Copyright IBM Corp. 2002, 2015 */ #define KMSG_COMPONENT "zfcp" @@ -513,7 +513,10 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req) fc_host_port_type(shost) = FC_PORTTYPE_PTP; break; case FSF_TOPO_FABRIC: - fc_host_port_type(shost) = FC_PORTTYPE_NPORT; + if (bottom->connection_features & FSF_FEATURE_NPIV_MODE) + fc_host_port_type(shost) = FC_PORTTYPE_NPIV; + else + fc_host_port_type(shost) = FC_PORTTYPE_NPORT; break; case FSF_TOPO_AL: fc_host_port_type(shost) = FC_PORTTYPE_NLPORT; @@ -618,7 +621,6 @@ static void zfcp_fsf_exchange_port_evaluate(struct zfcp_fsf_req *req) if (adapter->connection_features & FSF_FEATURE_NPIV_MODE) { fc_host_permanent_port_name(shost) = bottom->wwpn; - fc_host_port_type(shost) = FC_PORTTYPE_NPIV; } else fc_host_permanent_port_name(shost) = fc_host_port_name(shost); fc_host_maxframe_size(shost) = bottom->maximum_frame_size; -- 2.8.0.rc2.1.gbe9624a